VW Scirocco 3

Manufacturers

VW Scirocco 3

VW Scirocco 3

VW Scirocco 3 

There are 36 products.

Subcategories

  • VW Scirocco 3 1.4 TSI 122hp CAXA CMSB 2008-2017

    The 122hp VW Scirocco 3 1.4 TSI, built from 2008 to 2017, uses the EA111 with codes CAXA CMSB. Five references matching this engine.

    Rotating assembly: EA111 forged pistons by WOSSNER, JE Round or WISECO AP from 76.5 to 77.5mm, 19mm pin, ratio from 10 to 10.5:1; two sets of 4 ZRP H-beam forged con rods, with or without oil hole, ARP2000 or L19 bolts.

    ATHENA MLS head gasket at 77.8mm or COMETIC MLX at 77.0mm, VIBRA-TECHNICS Scirocco 3 road torque mount bush.

  • VW Scirocco 3 1.4 TFSI 125hp CXSB CZCA 2013-2017

    The 125hp VW Scirocco 3 1.4 TFSI, built from 2013 to 2017, uses the EA211 with codes CXSB or CZCA. Four active references, the same as on the CZDA page.

    EA211 forged pistons by WOSSNER, standard or Hard Crown, 74.5 or 75mm bore, ratio of 10.5:1; set of 4 ZRP I-beam forged con rods for the EA211, 4340 steel, ARP2000 bolts.

    ATHENA or COMETIC reinforced head gasket listed for the 1.4 TSI EA111 and EA211, and VIBRA-TECHNICS Scirocco 3 road torque mount bush, the only part of this mount listed outside the 2.0 engines.

  • VW Scirocco 3 1.4 TSI 150hp CZDA 2015-2017

    The 150hp VW Scirocco 3 1.4 TSI, built from 2015 to 2017, uses the EA211 with code CZDA. Four active references, the same as on the CXSB CZCA page.

    EA211 forged pistons by WOSSNER, standard or Hard Crown, 74.5 or 75mm bore, ratio of 10.5:1; set of 4 ZRP I-beam forged con rods for the EA211, 4340 steel, ARP2000 bolts.

    ATHENA or COMETIC reinforced head gasket listed for the 1.4 TSI EA111 and EA211, and VIBRA-TECHNICS Scirocco 3 road torque mount bush, the only part of this mount listed outside the 2.0 engines.

  • VW Scirocco 3 1.4 TSI 160hp CAVD CNWA CTHD CTKA 2008-2017

    The 160hp VW Scirocco 3 1.4 TSI, built from 2008 to 2017, uses the EA111 with codes CAVD CNWA CTHD CTKA. Seven references matching this engine.

    Valve train and head, specific to this page: CATCAMS sport camshafts 7608001 to 7608003 for the CAVE, CAVD and CTHE, CATCAMS kit of 16 outer springs and 16 retainers. Rotating assembly: EA111 forged pistons by WOSSNER, JE Round or WISECO AP from 76.5 to 77.5mm, 19mm pin, ratio from 10 to 10.5:1; two sets of 4 ZRP H-beam forged con rods, with or without oil hole, ARP2000 or L19 bolts.

    ATHENA MLS head gasket at 77.8mm or COMETIC MLX at 77.0mm, VIBRA-TECHNICS Scirocco 3 road torque mount bush.

  • VW Scirocco 3 2.0 TFSI 200hp CAWB 2008-2009

    The 200hp VW Scirocco 3 2.0 TFSI, built from 2008 to 2009, uses the EA888 with code CAWB. Eighteen references matching this engine, the only EA888 2.0 Scirocco 3 page with pistons.

    Bottom end: BOOSTLINE or ZRP forged con rods for the EA888 Gen1; EA888 Gen1 forged pistons with 21mm pin by DIAMOND, JE, WOSSNER or ZRP; EA888 main bearings and tanged or untanged big end bearings by ACL RACE or KING RACING; ARP2000 bolts and studs.

    Head: SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 head studs, EA888 ATHENA or COMETIC gasket. VIBRA-TECHNICS Scirocco 3 mounts.

  • VW Scirocco 3 2.0 TSI 210hp CCZB 2009-04/2011

    The 210hp VW Scirocco 3 2.0 TSI, built from 2009 to 04/2011, uses the EA888 with code CCZB. Seventeen references matching this engine, with no forged piston listed so far.

    Bottom end: BOOSTLINE or ZRP forged con rods for the EA888 Gen1; EA888 main bearings and tanged or untanged big end bearings by ACL RACE or KING RACING; ARP2000 bolts and studs.

    Head: SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 head studs, EA888 ATHENA or COMETIC gasket. VIBRA-TECHNICS Scirocco 3 mounts.

  • VW Scirocco 3 2.0 TSI 210hp CCZB 05/2011-2017

    The 210hp VW Scirocco 3 2.0 TSI, built from 05/2011 to 2017, uses the EA888 with code CCZB. Fifteen references matching this engine, here without con rod, piston or head gasket.

    Bottom end: EA888 main bearings and tanged or untanged big end bearings by ACL RACE or KING RACING; ARP2000 bolts and studs.

    Head: SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 head studs. VIBRA-TECHNICS Scirocco 3 mounts.

  • VW Scirocco 3 R 2.0 TFSI 256hp CDLC 2009-2017

    The 256hp VW Scirocco 3 R 2.0 TFSI, built from 2009 to 2017, uses the K04 turbo EA113 with code CDLC. Twenty active references.

    Bottom end: EA113 K04 / EA888 Gen1 forged pistons with 21mm pin by DIAMOND, JE, WOSSNER or ZRP; ZRP forged crankshaft with 90, 92.8, 95.2 or 98mm stroke; KING RACING and ACL RACE bearings; ARP2000.

    Head and valve train: CATCAMS cam followers, shims and vernier pulley, SUPERTECH or FERREA valves, guides and seals, ARP2000 studs, ATHENA or COMETIC gasket.

  • VW Scirocco 3 R 2.0 TFSI 265hp CDLA 2009-2017

    The 265hp VW Scirocco 3 R 2.0 TFSI, built from 2009 to 2017, uses the K04 turbo EA113 with code CDLA. Twenty active references.

    Bottom end: EA113 K04 / EA888 Gen1 forged pistons with 21mm pin by DIAMOND, JE, WOSSNER or ZRP; ZRP forged crankshaft with 90, 92.8, 95.2 or 98mm stroke; KING RACING and ACL RACE bearings; ARP2000.

    Head and valve train: CATCAMS cam followers, shims and vernier pulley, SUPERTECH or FERREA valves, guides and seals, ARP2000 studs, ATHENA or COMETIC gasket.

Showing 1 - 36 of 36 items
VW Scirocco 3
The Scirocco 3 is the most complete page in this section: nine engine sub-pages cover the full 2008 to 2017 spread, from the four versions of the 1.4 TSI and TFSI at 122, 125, 150 and 160bhp, to the 200 and 210bhp 2.0 TFSI and TSI, up to the 256 and 265bhp R models. Thirty-five lines out of forty-six are live. The 2.0 TFSI forged pistons on a 21mm pin are JE Pistons; the EA888 rod and piston listings gather several brands depending on the variant, with no single brand. The page also carries an EA113 forged crankshaft, ARP studs and a model-specific uprated engine mount.