Manufacturers

VW Corrado

VW Corrado 

There are 35 products.

Subcategories

  • VW Corrado 1.8 16V 136hp KR 1989-1992
    VW Corrado 1.8 16V 136hp KR 1989-1992

    The 136hp VW Corrado 1.8 16V, built from 1989 to 1992, uses the 1.8 16V KR. Twenty-one active references.

    Head: SUPERTECH valves up to +2.50mm, SUPERTECH guides, springs, seals and 7mm collets, ARP studs, ATHENA or COMETIC gasket. Valve train: CATCAMS sport camshafts for the 9A, KR and PL, CATCAMS Sport or Race springs, CATCAMS cam followers and shims, CATCAMS or KENT CAMS vernier pulley and sprocket.

    Bottom end: KR PL forged pistons by JE FSR, WISECO or WOSSNER from 81mm, 20mm pin; ACL RACE or KING RACING bearings. VIBRA-TECHNICS Corrado mounts, road or competition.

  • VW Corrado 2.0 16V 136hp 9A 1991-1995
    VW Corrado 2.0 16V 136hp 9A 1991-1995

    The 136hp VW Corrado 2.0 16V, built from 1991 to 1995, uses the 2.0 16V 9A. Twenty active references.

    Bottom end: 9A EA827 forged pistons by JE FSR, SUPERTECH, WISECO or WOSSNER from 82.5 to 83.5mm, 20mm pin; main and thrust bearings by ACL RACE or KING RACING; ARP main studs.

    Head and valve train: CATCAMS sport camshafts for the 9A, KR and PL, CATCAMS Sport or Race springs, CATCAMS cam followers and shims, CATCAMS or KENT CAMS pulley and sprocket; SUPERTECH valves up to +2.50mm, SUPERTECH guides, springs, seals and 7mm collets, ARP studs, ATHENA or COMETIC gasket. VIBRA-TECHNICS Corrado mounts.

  • VW Corrado G60 1.8 160hp PG 1988-1993
    VW Corrado G60 1.8 160hp PG 1988-1993

    The 160hp VW Corrado G60 1.8, built from 1988 to 1993, uses the 1.8 8V G60 with code PG. Seven active references, with no forged piston or con rod listed so far.

    Bottom end: ARP con rod bolts for the 1.6 and 1.8 8V EG and PG; main, tanged big end and thrust bearings by ACL RACE or KING RACING.

    Head: ARP studs for the 1.8 8V including the G60, ATHENA or COMETIC MLS gasket in many thicknesses. VIBRA-TECHNICS Corrado mounts, including G60-only rear engine mounts, road or competition.

  • VW Corrado VR6 2.9 190hp ABV 1991 - 1995
    VW Corrado VR6 2.9 190hp ABV 1991 - 1995

    The 190hp VW Corrado VR6, built from 1991 to 1995, uses the 2.9 VR6 12V ABV. Eleven active references, all for the VR6.

    Bottom end: set of 6 BOOSTLINE I-3P or ZRP I-HD forged con rods for the 2.8, 2.9 and 3.2 VR6; VR6 12V forged pistons by JE, WISECO or WOSSNER from 81mm, 20mm pin; main bearings by ACL RACE, KING RACING or KING RACE, ACL RACE big end and thrust bearings; ARP2000 con rod bolts and ARP main studs.

    Head: ARP studs for the AAA and ABV, ATHENA MLS gasket from 82.5 to 84.1mm. VIBRA-TECHNICS Corrado mounts.

Showing 1 - 35 of 35 items
VW Corrado
The Corrado came with four engines, and all four have their own page beneath this one: the 136bhp 1.8 16V KR, the 160bhp G60 1.8 coded PG, the 136bhp 2.0 16V 9A and the 190bhp VR6 2.9 ABV. Around fifty lines are also attached directly here, thirty-five of them live. The brands established across that stock are ARP for big end bolts and head studs, Athena for the VR6 head gasket, King Race and ACL for bearings, Catcams for the Race valve springs, Wössner and JE Pistons for the 2.0 16V forged pistons. A Corrado-specific uprated engine mount is available too.