Categories
Manufacturers
Categories
'steel stainless trim exhaust 1200C, roll 2.5 kg. NSB CONCEPT. Fast shipping!
Straight male-to-male 1/2" BSP - DASH 8 / AN 8 (JIC 3/4") adapter for MOCAL oil filter/sandwich plate
Straight male-to-male 1/2" BSP - DASH 10 / AN 10 (JIC 7/8") adapter for MOCAL sandwich plate/oil filter bracket
1/2" BSP - JIC 1" 1/16 - 12 (DASH 12) Adapter for MOCAL Oil Sandwich Plate/Filter Holder
Straight female-to-male adapter 1/8" NPT - DASH 3 / AN 3 (JIC 3/8")
1/8" NPT Insert aluminium weld female. NSB CONCEPT. Fast shipping!
1/8" NPT Stainless Steel Male Plug with Hex Head for Oil/Fuel Sensor Thread
Steel insert for EGT exhaust temperature sensor (K-sensor), threaded: 1/8" NPT.Made in France, machined with a significant thickness to facilitate welding and prevent thread deformation.
Water and oil temperature probe/sensor 1/8" NPT with connector
1/8" NPT Water Temperature Probe/Sensor with Solder Insert and DTM Type Connector (Waterproof)
10 Flexigauge "Green" Plastigage Threads for Bearings, Tolerance: 0.025 - 0.076mmAllows you to measure/check the clearance of your bearings.Packaging: 10 threads / box
High impedance 1000cc BOSCH injector with EV6 connector, 14mm diameter with seals, 65mm length - Sold individually
Gasket to cut for exhaust flange - 100x100mm, Thickness 2mm
Aluminum pipe, outer diameter 102mm, length 50cm
Reinforced stainless steel clamp, diameter 104-112mm for silicone hose
A 104-112mm - Reinforced stainless steel collar W5
A2 stainless steel washer, internal diameter: 10mm
Aluminium pipe external diameter 10mm, length 1 meter
Male ball Gasket, right-hand thread - 10mm diameter - M10 thread
Female ball Gasket, left-hand thread - 10mm diameter - M10 thread
TCH screw 10mm x 1.5, length 20mm A2 stainless steel
10mm x 1.5 (M10) stud, 35mm length
Screw 10mm x 1.5, length 20mm Stainless steel A2
High impedance fuel injector clinic 1100cc, length 64mm, fuel rail side diameter: 14mm, intake manifold side diameter: 14mm, EV1 connector connection
Reinforced collar, diameter 113-121mm, in chrome-plated steel and zinc-plated steel screws
Reinforced collar, diameter 113-121mm, in AISI 304 stainless steel
12-point spark plug wrench - 12-point socket (your choice) - Length: 270mm. NSB CONCEPT. Fast shipping!
Reinforced collar, diameter 122-130mm, in AISI 304 stainless steel
Reinforced collar, diameter 122-130mm, made of galvanized steel and zinc-plated steel screws
Female ball Gasket, left-hand thread - 12mm diameter - M12 thread
Wheel bolt 12x150 conical, length 32mm, wrench 17
Reinforced collar, diameter 131-139mm, in AISI 304 stainless steel
WOSSNER Forged Connecting Rod kit (4 rods)Specifications:- Piston pin diameter: 18mm- Big end width: 23.9mm- Center-to-center distance: 139.85mm- Big end diameter: 48.66mm- Small end width: 20mm- Connecting rod section: H
Reinforced collar, diameter 140-148mm, in AISI 304 stainless steel
Reinforced collar, diameter 149-161mm, in chrome-plated steel and zinc-plated steel screws
Reinforced collar, diameter 149-161mm, in AISI 304 stainless steel
Aluminium pipe external diameter 14mm, length 1 meter
Female ball Gasket, left-hand thread - 14mm diameter - M14 thread
Male ball Gasket, left-hand thread - 14mm diameter - M14 thread -
Reinforced stainless steel collar with double swivel, 150-160mm
Female ball Gasket, left-hand thread - 16mm diameter - M16 thread
Female ball Gasket, right-hand thread - 16mm diameter - M16 thread
Male ball Gasket, left-hand thread - 16mm diameter - M16 thread - SUPPLIED WITH LOCK NUT
Male ball Gasket, right-hand thread - 16mm diameter - M16 thread
Reinforced collar, diameter 17-19mm, in chrome-plated steel and zinc-plated steel screws
Reinforced collar, diameter 17-19mm, in AISI 304 stainless steel
Female ball Gasket, left-hand thread - 18mm diameter - M18 thread
Female ball Gasket, right-hand thread - 18mm diameter - M18 thread
Male ball Gasket, left-hand thread - 18mm diameter - M18 thread - SUPPLIED WITH LOCK NUT
Goodridge braided brake hose kit for Volkswagen Beetle <1964 (Pre-1964)
2-hole 50mm flange kit for RC RACING 4-into-1 manifold
2-in-1 Stainless Steel (Y) for manifold and exhaust line, length: 240mm, Thickness: 1.5mm Features:
2-in-1 Stainless Steel (Y) for manifold and exhaust line, length: 240mm, Thickness: 1.5mm Features:
2-in-1 Stainless Steel (Y) for manifold and exhaust line, length: 240mm, Thickness: 1.5mm Features:
Forged pistonsHonda B20B 2.0L(CR-V RD1, Orthia) Bores84 86.5mm, CR OEM8.5 12.8:1depending on models, Pin21mm. Ranges available:JE, Manley, Supertech, Wiseco.
Wiseco & Wossner forged piston kit for BMW M10B20: bore 89-90.25 mm, RV 10 or 11.8-12:1, pin 22 mm, dome 10.4/28.8 cc, rings included.
Forged pistonsHonda K24 2.4L Bores87 90mm, Volume ratio 8.8 14.5:1, Pin22mm. RangesJE (FSR/Round/Ultra), Supertech, Wiseco. Data from the file, conformal sorting, compatibilities &OEM referencesincluded.
Ford 2.5 RS 20v forged pistons bores 83-84.5 mm, RV 8-8.5:1, axle 23 mm. JE, Wiseco, Wossner ranges. Applications: Focus RS Mk2 (305 hp), RS500 (350 hp).
Wiseco Forged Pistons for BMW M50B25TU (24V): Bore 84-84.5mm, RV 11:1 (NA) or 8.8:1 (Turbo), Shaft 22mm, CH 33.2mm, Dome ⌀1.5 to ⌀13.5cc, Rings Included.
Reinforced collar, 20-22mm diameter, in chrome-plated steel and zinc-plated steel screws