VW Golf 3

Manufacturers

VW Golf 3

VW Golf 3

VW Golf 3 

There are 47 products.

Subcategories

  • VW Golf 3 2.0 8V 115hp ABA 1991-1997
    VW Golf 3 2.0 8V 115hp ABA 1991-1997

    The 115hp VW Golf 3 2.0 8V, built from 1991 to 1997, uses the ABA. Eight active references, focused on the bottom end.

    ABA forged pistons by JE Round, JE FSR, WISECO or WOSSNER in 82.5 to 84mm bore, ratio from 9 to 12.7:1; set of 4 ZRP I-Lite forged con rods in 4340 steel, ARP2000 or L19 bolts; ACL RACE or KING RACING tanged big end bearings, main bearings and thrust washers.

    Head: ARP 8740 studs for the 8-valve ABA, COMETIC MLS or ATHENA gasket.

    VIBRA-TECHNICS Golf 3 mounts, road or competition.

  • VW Golf 3 GTI 150hp ABF 1992-1997
    VW Golf 3 GTI 150hp ABF 1992-1997

    The 150hp VW Golf 3 GTI 2.0 16V, built from 1992 to 1997, uses the ABF. Twenty-three active references, from head to bottom end.

    Head: CATCAMS sport camshafts in 22 references, cam followers and shims, CATCAMS Sport or Race valve springs, CATCAMS or KENT CAMS vernier pulley and sprocket; SUPERTECH valves up to +2.50mm, guides, springs, stem seals and 7mm collets by SUPERTECH; ARP 8740 studs, 151-tooth KENT CAMS cam belt.

    Bottom end: ABF forged pistons by WISECO, SUPERTECH, WOSSNER or JE from 82.5 to 84mm, ZRP I-Lite con rods, ACL RACE or KING RACING bearings, ARP main studs.

  • VW Golf 3 VR6 2.8 174hp AAA 1992-1997
    VW Golf 3 VR6 2.8 174hp AAA 1992-1997

    The 174hp VW Golf 3 VR6 2.8, built from 1992 to 1997, uses the 12V AAA. Twenty-three active references, including the full AAA-specific head.

    Head: CATCAMS sport camshafts in 12 references, 12 cam followers and shims, CATCAMS vernier sprocket; 6 intake and 6 exhaust valves by SUPERTECH or FERREA up to +3.00mm, SUPERTECH springs, stem seals and 7mm collets, ARP 8740 studs, ATHENA MLS gasket.

    Bottom end: VR6 12V forged pistons by WOSSNER, JE or WISECO from 81 to 83.5mm, 6 BOOSTLINE or ZRP con rods, ACL RACE or KING RACE bearings, ARP fasteners. FIC injectors.

  • VW Golf 3 VR6 2.9 190hp ABV 1994 - 1999
    VW Golf 3 VR6 2.9 190hp ABV 1994 - 1999

    The 190hp VW Golf 3 VR6 2.9, built from 1994 to 1999, uses the 12V ABV, shared with the VW Corrado VR6. Thirteen active references, focused on the bottom end: the camshafts, valves and springs of the 2.8 AAA are not linked to this page.

    VR6 12V forged pistons by WOSSNER, JE or WISECO from 81 to 83.5mm, 20mm gudgeon pin; set of 6 BOOSTLINE I-3P or ZRP I-HD con rods in 4340 steel; ACL RACE, KING RACING or KING RACE bearings; ARP 8740 main studs, ARP2000 con rod bolts.

    ARP head studs, ATHENA MLS gasket, FIC injectors, VIBRA-TECHNICS mounts.

Showing 1 - 47 of 47 items
VW Golf 3
The Golf 3 breaks down here into four engine sub-pages: the 115bhp 2.0 8V ABA, the 150bhp GTI 16V ABF, the 174bhp VR6 2.8 AAA and the 190bhp VR6 2.9 ABV. Forty-seven live lines are attached directly to it, across thirteen part families. The VR6 forged pistons are chosen between Wiseco, Wössner and JE Pistons depending on the size, from 81 to 82mm and 8:1 to 10.5:1. Forged rods come in ZRP and Boostline. The VR6 head gasket is Athena, the bearings King Race and ACL, the valves Supertech, the 2.0 16V timing belt Kent Cams and the fasteners ARP.