Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
SEAT Ibiza 6J
Manufacturers
SEAT Ibiza 6J
Subcategories
The SEAT Ibiza 6J 1.4 TFSI 140hp, built from 2013 to 2015, uses the EA211 engine, code CPTA. Four active references, shared with the CZEA page of the same Ibiza.
Bottom end: WOSSNER forged pistons for EA211, standard or Hard Crown, 74.5mm or 75mm bore, 10.5:1 compression ratio, 19mm gudgeon pin; set of 4 ZRP forged 4340 steel connecting rods, ARP 2000 bolts included. Cylinder head: ATHENA or COMETIC uprated head gasket listed for the 1.4 TSI EA111 and EA211.
Chassis side: VIBRA-TECHNICS uprated engine and gearbox mounts for the Ibiza 6J, 2008 to 2017.
On the SEAT Ibiza 6J 1.4 TFSI 150hp, sold from 2015 to 2017, the EA211 engine carries code CZEA. This page lists exactly the four references of the 140hp CPTA version: only the engine code changes, not the parts.
For the bottom end, a set of 4 ZRP forged 4340 steel connecting rods whose product page names the CZEA, with ARP 2000 bolts, and WOSSNER EA211 forged pistons in 74.5mm or 75mm at 10.5:1, standard or Hard Crown. For sealing, an ATHENA or COMETIC uprated head gasket. For the link to the chassis, VIBRA-TECHNICS uprated mounts for the Ibiza 6J.
The SEAT Ibiza Cupra 6J 1.4 TSI 180hp, built from 2009 to 2015, runs the EA111 twincharged engine, codes CAVE, CTHE and CTJC.
Cylinder head: CATCAMS Sport camshafts 7608001 to 7608003 and a CATCAMS kit of 16 outer valve springs with 16 steel retainers. Bottom end: WOSSNER, JE Round or WISECO AP forged EA111 pistons from 76.5mm to 77.5mm, 19mm gudgeon pin, and two sets of 4 ZRP forged connecting rods, ARP 2000 or L19 bolts. Also listed: an ATHENA or COMETIC head gasket and VIBRA-TECHNICS mounts.
The ACL RACE / KING RACING bearings on this page are listed for the EA888: check before ordering.
Set of 4 forged 4340 connecting rods for Audi/Volkswagen 1.4 TSI EA111.Brands: ZRP Compatibility: VW Golf V/VI, Scirocco, Jetta ; Audi A1 ; SEAT ; Škoda Octavia, Yeti Engine codes: CAVD, CAXA Bolts included: ARP 2000 or L19
Set of 4 forged 4340-steel connecting rods for the VAG 1.4 TSI EA111 (rifle-drilled).Brand : ZRP Compatibility : Golf, Polo, Ibiza (VAG) Engine codes : CAVD, CAXA, CAVA, BLG, CAX, CAV, CVA Bolts included : ARP 2000 or L19
Set of 4 forged 4340 steel connecting rods for Audi / Volkswagen 1.4 TSI EA211. Brand: ZRPCompatibility: Audi A1/A3/Q2/Q3, SEAT Ibiza/Leon, Škoda Fabia/Superb, VW Golf VII/Polo/PassatEngine codes: CZCA, CPTA, CHPA, CZDA, CZEABolts included: ARP 2000
EA111 1.4 TSI/TFSI 16v (76.5 mm) forged pistons: sorted specs (Volume ratio 10.0:1, Pin 19 mm, CH 28.97), CAXA/CAXC/CAVD compatibility + Audi/VW/Seat/Skoda vehicle table and OEM refs.
Forged pistons for VW/Audi 1.4L 16v EA211: Bore 74.5 mm, Volume ratio 10.0:1, Pin 19 mm. Dome/weight according to reference, Rings included. COMPatibilities A3, Golf 7, Leon, Octavia, JEtta.
Complete kit for the VAG 1.4 TSI twincharged 160 to 180 hp, 16 valves: 16× CATCAMS PAC-E99864 outer valve springs + 16× CATCAMS 99480/S steel upper retainers. Engine codes CAVE, CAVD, CTHE. Maximum load 60 kg at 12.0 mm lift.
Reinforced head gasket, Cometic in MLX and Athena in MLS. Sold individually, one gasket per engine.Brands: Cometic and AthenaEngines: 1.4 L 16VBores: 77 mm and 77.8 mmThicknesses: 0.81 to 1.02 mmReplaces: 03C 103 383 AM, R, AE, AH
CATCAMS Sport camshafts for VAG 1.4 TSI CAVE CAVD CTHE engine:SEAT Ibiza Cupra 6J 2009 - 2015VW New Beetle 2011 - 2016VW Golf 6 2008 - 2016VW Polo GTI 6R 2010 - 2014VW Scirocco 3 2008 - 2017CATCAMS reference: 7608001, 7608002, 7608003
VIBRA-TECHNICS uprated engine and gearbox mount for SEAT Ibiza 6J:SEAT Ibiza 6J 2008 - 2017
