Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
SEAT Leon 5F
Manufacturers
SEAT Leon 5F
Subcategories
The 122hp SEAT Leon 5F 1.4 TFSI, built from 2012 to 2016, uses the EA211 with codes CMBA or CXSA. Three active references, the same as on the CZCA, CHPA CPTA and CZDA CZEA pages.
EA211 forged pistons by WOSSNER, standard or Hard Crown, 74.5 or 75mm bore, ratio of 10.5:1; set of 4 ZRP I-beam forged con rods for the EA211, 4340 steel, ARP2000 bolts.
ATHENA or COMETIC reinforced head gasket listed for the 1.4 TSI EA111 and EA211: ATHENA MLS in 1.00mm, COMETIC MLX in 0.81 or 1.02mm, to set the compression after skimming.
The 125hp SEAT Leon 5F 1.4 TFSI, built from 2014 to 2020, uses the EA211 with code CZCA. Three references retained, the same as on the CMBA CXSA, CHPA CPTA and CZDA CZEA pages.
EA211 forged pistons by WOSSNER, standard or Hard Crown, 74.5 or 75mm bore, ratio of 10.5:1; set of 4 ZRP I-beam forged con rods for the EA211, 4340 steel, ARP2000 bolts.
ATHENA or COMETIC reinforced head gasket listed for the 1.4 TSI EA111 and EA211: ATHENA MLS in 1.00mm, COMETIC MLX in 0.81 or 1.02mm, to set the compression after skimming.
The 140hp SEAT Leon 5F 1.4 TFSI, built from 2012 to 2020, uses the EA211 with codes CHPA or CPTA. Three active references, the same as on the CMBA CXSA, CZCA and CZDA CZEA pages.
EA211 forged pistons by WOSSNER, standard or Hard Crown, 74.5 or 75mm bore, ratio of 10.5:1; set of 4 ZRP I-beam forged con rods for the EA211, 4340 steel, ARP2000 bolts.
ATHENA or COMETIC reinforced head gasket listed for the 1.4 TSI EA111 and EA211: ATHENA MLS in 1.00mm, COMETIC MLX in 0.81 or 1.02mm, to set the compression after skimming.
The 150hp SEAT Leon 5F 1.4 TFSI, built from 2014 to 2020, uses the EA211 with codes CZDA or CZEA. Three references retained, the same as on the CMBA CXSA, CZCA and CHPA CPTA pages.
EA211 forged pistons by WOSSNER, standard or Hard Crown, 74.5 or 75mm bore, ratio of 10.5:1; set of 4 ZRP I-beam forged con rods for the EA211, 4340 steel, ARP2000 bolts.
ATHENA or COMETIC reinforced head gasket listed for the 1.4 TSI EA111 and EA211: ATHENA MLS in 1.00mm, COMETIC MLX in 0.81 or 1.02mm, to set the compression after skimming.
The 190hp SEAT Leon 5F 2.0 TFSI, built from 2018 to 2020, uses the EA888 Gen3 with code DKZA. Fifteen references matching this engine.
Bottom end: EA888 Gen3 and Gen4 forged pistons with 23mm pin by JE, WISECO, DIAMOND or WOSSNER, from 82.5 to 83.5mm; Gen3 and Gen4 forged con rods by BOOSTLINE, WOSSNER or ZRP; big end bearings by ACL RACE or KING RACING; ARP2000 fasteners.
Head: EA888 Gen3 and Gen4 ATHENA or COMETIC MLS gasket at 83.0mm, SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 studs.
The 265hp SEAT Leon Cupra 5F, built from 2013 to 2020, uses the EA888 Gen3 with code CJXE. Seventeen references matching this engine.
Bottom end: EA888 Gen3 and Gen4 forged pistons with 23mm pin by JE, WISECO, DIAMOND or WOSSNER, from 82.5 to 83.5mm; Gen3 and Gen4 forged con rods by BOOSTLINE, WOSSNER or ZRP; EA888 Gen3 main and big end bearings by ACL RACE or KING RACING; ARP2000 fasteners.
Head: EA888 Gen3 and Gen4 ATHENA or COMETIC MLS gasket at 83.0mm, SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 studs.
The 280hp SEAT Leon Cupra 5F, built from 2013 to 2020, uses the EA888 Gen3 with code CJXA. Seventeen references matching this engine.
Bottom end: EA888 Gen3 and Gen4 forged pistons with 23mm pin by JE, WISECO, DIAMOND or WOSSNER, from 82.5 to 83.5mm; Gen3 and Gen4 forged con rods by BOOSTLINE, WOSSNER or ZRP; EA888 Gen3 main and big end bearings by ACL RACE or KING RACING; ARP2000 fasteners.
Head: EA888 Gen3 and Gen4 ATHENA or COMETIC MLS gasket at 83.0mm, SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 studs.
The 290hp SEAT Leon Cupra 5F, built from 2015 to 2020, uses the EA888 Gen3 with codes CJXH or DNUC. Seventeen references matching this engine.
Bottom end: EA888 Gen3 and Gen4 forged pistons with 23mm pin by JE, WISECO, DIAMOND or WOSSNER, from 82.5 to 83.5mm; Gen3 and Gen4 forged con rods by BOOSTLINE, WOSSNER or ZRP; EA888 Gen3 main and big end bearings by ACL RACE or KING RACING; ARP2000 fasteners.
Head: EA888 Gen3 and Gen4 ATHENA or COMETIC MLS gasket at 83.0mm, SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 studs.
The 300hp SEAT Leon Cupra 5F, built from 2016 to 2020, uses the EA888 Gen3 with codes CJXC or DNUE. Seventeen references matching this engine.
Bottom end: EA888 Gen3 and Gen4 forged pistons with 23mm pin by JE, WISECO, DIAMOND or WOSSNER, from 82.5 to 83.5mm; Gen3 and Gen4 forged con rods by BOOSTLINE, WOSSNER or ZRP; EA888 Gen3 main and big end bearings by ACL RACE or KING RACING; ARP2000 fasteners.
Head: EA888 Gen3 and Gen4 ATHENA or COMETIC MLS gasket at 83.0mm, SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 studs.
The 310hp SEAT Leon Cupra R 5F, built from 2017 to 2018, uses the EA888 Gen3 with code CJXG. Seventeen references matching this engine.
Bottom end: EA888 Gen3 and Gen4 forged pistons with 23mm pin by JE, WISECO, DIAMOND or WOSSNER, from 82.5 to 83.5mm; Gen3 and Gen4 forged con rods by BOOSTLINE, WOSSNER or ZRP; EA888 Gen3 main and big end bearings by ACL RACE or KING RACING; ARP2000 fasteners.
Head: EA888 Gen3 and Gen4 ATHENA or COMETIC MLS gasket at 83.0mm, SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, seals and collets, SUPERTECH or FERREA springs, ARP2000 studs.
Bearings Connecting rods tri-metal luged VAG 1.4 TFSI 1.8/2.0 8V/16V 1.8T 20V EA113 EA888Bearings Connecting rods trimetal luged ACL Race / King RacingVAG 1.4 Key Features: AUDI A3 S3 8L 8P AUDI A4 B5 B6 B7 AUDI TT TTS 8N 8J KTM X-Bow GT GT4 RR Bearings Connecting rods trimetal luged ACL Race / King RacingVAG 1.4 TFSI 1.8/2.0 8V/16V 1.8T 20V2.0 TFSIEA113...
Set of 4 forged 4340 steel connecting rods for Audi / Volkswagen 1.4 TSI EA211. Brand: ZRPCompatibility: Audi A1/A3/Q2/Q3, SEAT Ibiza/Leon, Škoda Fabia/Superb, VW Golf VII/Polo/PassatEngine codes: CZCA, CPTA, CHPA, CZDA, CZEABolts included: ARP 2000
Set of 4 forged 4340 or EN24T steel connecting rods for the Audi/Volkswagen 2.0 TSI EA888 Gen.3/Gen.4.Brands: Boostline, FCP Engineering, Wössner, ZRP Compatibility: Audi S3 8V, TT, Golf GTI Engine codes: CJXC, CHHC Bolts included: ARP 2000, L19 or CA625+
Forged pistons for VW/Audi 1.4L 16v EA211: Bore 74.5 mm, Volume ratio 10.0:1, Pin 19 mm. Dome/weight according to reference, Rings included. COMPatibilities A3, Golf 7, Leon, Octavia, JEtta.
Forged pistons for VAG EA888 Gen3/Gen4 (2.0 TSI/TFSI) Pin 23 mm. ⌀ 82.5 / 83 / 83.5mm, Volume ratio 9.3 10.0:1 depending on variant. Alloy2 618(And 4032 depending on brands).Rings, Pins and circlips included. Compatibilities: Golf 7/8 GTI/R, Audi S3 8V/TT-TTS 8S, Leon Cupra, Octavia RS (see engine codes).
Gaskets tails Valves Intake Supertech for2.0 TFSI EA113 EA888AUDI A1 / S1 8XAUDI A3 / S3 8P / 8VAUDI A4 B8AUDI TT / TTS 8J / FVKTM X-Bow / GT4 / GT / R / RRSEAT Leon / Cupra R 1PSEAT Leon / Cupra 5FSEAT / CUPRA Leon KLVW Golf 5 GTIVW Golf 6 / GTI / RVW Golf 7 GTI / ClubSport / ClubSport S / TCR / RVW Golf 8 GTIVW New BeetleVW Polo R WRC 6RVW Scirocco 3 / R
SUPERTECH / FERREA performance exhaust valves for the VAG 2.0 TFSI EA113 and EA888:AUDI A1 / S1 8X AUDI A3 / S3 8P / 8V AUDI A4 B8 AUDI TT / TTS 8J / FV KTM X-Bow / GT4 / GT / R / RR SEAT Leon / Cupra R 1P SEAT Leon / Cupra 5F SEAT / CUPRA Leon KL VW Golf 5 GTI VW Golf 6 / GTI / R VW Golf 7 GTI / Clubsport / Clubsport S / TCR / R VW Golf 8 GTI VW New...
SUPERTECH / FERREA intake valves for the 2.0 TFSI EA113 and EA888:AUDI A1 / S1 8X AUDI A3 / S3 8P / 8V AUDI A4 B8 AUDI TT / TTS 8J / FV KTM X-Bow / GT4 / GT / R / RR SEAT Leon / Cupra R 1P SEAT Leon / Cupra 5F SEAT / CUPRA Leon KL VW Golf 5 GTI VW Golf 6 / GTI / R VW Golf 7 GTI / Clubsport / Clubsport S / TCR / R VW Golf 8 GTI VW New Beetle VW Polo R...
Kit of 10 ARP cylinder head studs for Volkswagen Group 2.0 TFSI and TSI EA113 and EA888 engines.Brand: ARP Engines: EA113, EA888 Thread: M10 x 1.5 Grade: ARP2000
ARP2000 crankshaft main studs for the VAG 2.0 TFSI EA113 and EA888 engines.Brand: ARP Engines: EA113, EA888 Thread: M10 x 1.5 Grade: ARP2000
Reinforced head gasket Athena / Cometic for2.0 TFSI EA888.3/4 engine (after 2012)AUDI S1 8XAUDI A4 B8AUDI A3 8PAUDI A3 / S3 8VAUDI TT 8JAUDI TT / TTS FVKTM X-BowSEAT Leon 1PSEAT Leon / Leon Cupra 5FSEAT / CUPRA Leon KLVW Golf 5 GTIVW Golf 6 / Golf 6 GTIVW Golf 7 GTI / ClubSport / ClubSport S / TCRVW Golf 7 RVW Golf 8 GTIVW New BeetleVW Scirocco 3
Reinforced head gasket, Cometic in MLX and Athena in MLS. Sold individually, one gasket per engine.Brands: Cometic and AthenaEngines: 1.4 L 16VBores: 77 mm and 77.8 mmThicknesses: 0.81 to 1.02 mmReplaces: 03C 103 383 AM, R, AE, AH
Kit of 32 half-moon valve collets for SUPERTECH / FERREA valves, 6mm diameter:Number of grooves of your choice
SUPERTECH exhaust valve stem seals, 2.0 TFSI EA113 EA888:AUDI A1 / S1 8X AUDI A3 / S3 8P / 8V AUDI A4 B8 AUDI TT / TTS 8J / FV KTM X-Bow / GT4 / GT / R / RR SEAT Leon / Cupra R 1P SEAT Leon / Cupra 5F SEAT / CUPRA Leon KL VW Golf 5 GTI VW Golf 6 / GTI / R VW Golf 7 GTI / Clubsport / Clubsport S / TCR / R VW Golf 8 GTI VW New Beetle VW Polo R WRC 6R VW...
Trimetal Crankshaft Bearings ACL Race /AUDI S1 8XAUDI S3 8VAUDI TT / TTS FVSEAT Leon Cupra 5FVW Golf 7 GTI / GTI ClubSport / GTI TCR / R
Set of 8 trimetal connecting rod half-bearings for the Volkswagen 1.8 and 2.0 TSI / TFSI EA888 four-cylinder.Brands and treatments: ACL Race and King Racing GPC Compatibility: Audi A3, S3, A4, A5, TT, VW Golf GTI and R, Passat, Seat Leon Cupra, Skoda Octavia RS Engine codes: EA888 Gen.1 to Gen.4 Available sizes: standard to +0.25 mm, increased-clearance...
ARP uprated con rod bolts for the 2.0 TFSI EA113 and EA888 engine:AUDI A1 / S1 8XAUDI A3 / S3 8P / 8VAUDI A4 B8AUDI TT / TTS 8J / FVKTM X-Bow / GT4 / GT / R / RRSEAT Leon / Cupra R 1PSEAT Leon / Cupra 5FSEAT / CUPRA Leon KLVW Golf 5 GTIVW Golf 6 / GTI / RVW Golf 7 GTI / Clubsport / Clubsport S / TCR / RVW Golf 8 GTIVW New BeetleVW Polo R WRC 6RVW Scirocco...
Reinforced Valve Springs Supertech/Ferrea2.0 TFSI EA113 EA888AUDI A1 / S1 8X AUDI A3 / S3 8P / 8V AUDI A4 B8 AUDI TT / TTS 8J / FV KTM X-Bow / GT4 / GT / R / RR SEAT Leon / Cupra R 1P SEAT Leon / Cupra 5F SEAT / CUPRA Leon KL VW Golf 5 GTI VW Golf 6 / GTI / R VW Golf 7 GTI / ClubSport / ClubSport S / TCR / R VW Golf 8 GTI VW New Beetle VW Polo R WRC 6R...
Kit of 64 valve collets for SUPERTECH / FERREA valves, 6mm diameter: Number of grooves of your choiceReference: KPR-6S-7-64, KPR-VW6-T-64
Supertech Valve Guides for2.0 TFSI EA113 and EA888 engineAUDI A1 / S1 8XAUDI A3 / S3 8P / 8VAUDI A4 B8AUDI TT / TTS 8J / FVKTM X-Bow / GT4 / GT / R / RRSEAT Leon / Cupra R 1PSEAT Leon / Cupra 5FSEAT / CUPRA Leon KLVW Golf 5 GTIVW Golf 6 / GTI / RVW Golf 7 GTI / ClubSport / ClubSport S / TCR / RVW Golf 8 GTIVW New BeetleVW Polo R WRC 6RVW Scirocco 3 / R
