VW Beetle

Manufacturers

VW Beetle

VW Beetle

VW Beetle 

There are 24 products.

Subcategories

  • VW Beetle 1.4 TFSI 150hp CZDA 2014-2019

    The 150hp VW Beetle 1.4 TFSI, built from 2014 to 2019, uses the EA211 with code CZDA. Three active references, all dedicated to the bottom end and the head gasket.

    EA211 forged pistons by WOSSNER, standard or Hard Crown, 74.5 or 75mm bore, ratio of 10.5:1, 19mm gudgeon pin; set of 4 ZRP I-beam forged con rods for the EA211, 4340 steel, ARP2000 bolts, listed for the CZDA.

    ATHENA MLS reinforced head gasket at 77.8mm or COMETIC MLX at 77.0mm in 0.81 or 1.02mm, listed for the 1.4 TSI EA111 and EA211 including the VW New Beetle.

  • VW Beetle 1.4 TSI 160hp CAVD CNWA CTHD CTKA 2011-2016

    The 160hp VW Beetle 1.4 TSI, built from 2011 to 2016, uses the twincharged EA111 with codes CAVD CNWA CTHD CTKA. Six references matching this engine.

    Valve train: CATCAMS sport camshafts 7608001 to 7608003 for the CAVE, CAVD and CTHE, CATCAMS kit of 16 outer springs and 16 steel retainers. Rotating assembly: EA111 forged pistons by WOSSNER, JE Round or WISECO AP from 76.5 to 77.5mm, 19mm gudgeon pin, ratio from 10 to 10.5:1; two sets of 4 ZRP H-beam forged con rods, with or without oil hole, ARP2000 or L19 bolts.

    ATHENA MLS head gasket at 77.8mm or COMETIC MLX at 77.0mm.

  • VW Beetle 2.0 TFSI 200hp CBFA CCTA CCZA 2011-2016

    The 200hp VW Beetle 2.0 TFSI, built from 2011 to 2016, uses the EA888 Gen2 with codes CBFA CCTA CCZA. Fourteen references matching this engine; the pistons, con rods and gasket here are listed for the EA888 Gen3/Gen4.

    Head: SUPERTECH or FERREA valves up to +2.00mm, SUPERTECH guides, valve stem seals and collets, SUPERTECH or FERREA springs, ARP2000 head studs. Bottom end: Gen2 main bearings and big end bearings by ACL RACE or KING RACING, ARP2000 con rod bolts and main studs.

    VIBRA-TECHNICS Beetle mounts, right engine and gearbox, road or competition.

Showing 1 - 24 of 24 items
VW Beetle
The modern Beetle shares its blocks with the rest of the group: the 160bhp 1.4 TSI coded CAVD, CNWA, CTHD and CTKA, the 150bhp 1.4 TFSI coded CZDA, and the 200bhp 2.0 TFSI coded CBFA, CCTA and CCZA. Each has its own sub-page. Twenty-three live lines are also attached directly here. Among them are four different ZRP forged rods, for the EA111 with a 19mm pin with or without oil feed, for the EA211 and for the EA888 Gen3 and Gen4, forged pistons from Wössner, JE Pistons and Wiseco, Supertech valves and collets, ACL bearings and ARP fasteners.