VW Polo 6N

Manufacturers

VW Polo 6N

VW Polo 6N

VW Polo 6N 

There are 7 products.

Subcategories

  • VW Polo 6N 1.4 16V 100hp AFH 1996-1999
    VW Polo 6N 1.4 16V 100hp AFH 1996-1999

    The VW Polo 6N 1.4 16V 100hp, built from 1996 to 1999, uses engine code AFH. Five active references, each listed by its product page for this engine.

    CATCAMS valve train: Sport camshafts, vernier cam pulleys and mechanical cam followers. Bottom end: JE forged pistons in 76.7mm or 77mm bore, 17mm gudgeon pin, 10.5:1 compression ratio, and a set of 4 ZRP forged 4340 steel connecting rods for AFH, AFK and AHW, ARP 2000 bolts included.

    No head gasket or bearings on this page at present.

  • VW Polo GTI 6N 1.6 16V 125hp ARC AVY 1999-2001
    VW Polo GTI 6N 1.6 16V 125hp ARC AVY 1999-2001

    The VW Polo GTI 6N 1.6 16V 125hp, built from 1999 to 2001, is listed here under engine codes ARC and AVY. Only two active references, one per engine code.

    For the AVY engine, CATCAMS Sport camshafts, references 7607101, 7607103, 7617103, 7617104 and 7617106. For the ARC engine, a set of Wiseco forged pistons listed for AJV and ARC, 76.5mm bore, 17mm gudgeon pin.

    No connecting rods, head gasket or bearings on this page: contact us for a complete bottom end.

Showing 1 - 7 of 7 items
VW Polo 6N
The Polo 6N covers two engines here, each with its own sub-page: the 100bhp 1.4 16V AFH and the 125bhp GTI 1.6 16V, codes ARC and AVY. Seven lines remain live. Forged pistons are split by block: JE Pistons for the 1.4 AFH, Wiseco for the 1.6 AJV and ARC. The ZRP forged connecting rods are quoted for the 1.4 16V AFH, AFK and AHW, so shared with the SEAT Ibiza 6K. The page also carries two separate performance camshafts, one for the AFH and one for the GTI AVY, their vernier pulleys and a set of mechanical cam followers.