Manufacturers

SEAT Ibiza 6K

SEAT Ibiza 6K 

There are 35 products.

Subcategories

  • SEAT Ibiza 6K 1.4 16V 101hp AFH AQQ AUB 1997-2002
    SEAT Ibiza 6K 1.4 16V 101hp AFH AQQ AUB 1997-2002

    The 101hp SEAT Ibiza 6K 1.4 16V, built from 1997 to 2002, is listed with codes AFH, AQQ and AUB. Six active references, all listed by their product page for the 1.4 16V AFH.

    CATCAMS valve train: sport camshafts 7606511 to 7608523, cam followers and vernier pulleys. Rotating assembly: JE forged pistons in 76.7 or 77mm bore, 17mm pin, ratio of 10.5:1; set of 4 ZRP I-Lite forged con rods for the AFH, AFK and AHW, ARP2000 bolts.

    VIBRA-TECHNICS Ibiza 6K2 engine and gearbox mounts, road or competition.

  • SEAT Ibiza 6K 2.0 16V 150hp ABF 1996-1999
    SEAT Ibiza 6K 2.0 16V 150hp ABF 1996-1999

    The 150hp SEAT Ibiza 6K 2.0 16V, built from 1996 to 1999, uses the ABF. Twenty-one active references, the most complete Ibiza 6K page.

    Valve train and head: CATCAMS sport camshafts for the ABF in 22 references, CATCAMS Sport or Race springs, CATCAMS cam followers and shims, CATCAMS or KENT CAMS vernier pulley and sprocket; SUPERTECH valves up to +2.50mm, SUPERTECH guides, springs, seals and 7mm collets, ARP studs, ATHENA or COMETIC gasket.

    Bottom end: ABF forged pistons by JE, SUPERTECH, WISECO or WOSSNER from 82.5 to 84mm, 21mm pin; ZRP I-Lite con rods for the EA827; ACL RACE or KING RACING bearings; ARP main studs.

  • SEAT Ibiza Cupra 6K 1.8T 156hp AQX AYP 2000-2002
    SEAT Ibiza Cupra 6K 1.8T 156hp AQX AYP 2000-2002

    The 156hp SEAT Ibiza Cupra 6K 1.8T, built from 2000 to 2002, uses the 1.8T 20V with codes AQX or AYP. Sixteen active references, the same as on the Cupra R AYP page.

    Bottom end: 1.8T 20V forged pistons with 20mm pin by DIAMOND, JE, SUPERTECH, WISECO or WOSSNER, from 81 to 83mm; main, tanged big end and thrust bearings by ACL RACE or KING RACING; ARP main studs for the chain driven oil pump.

    Head: SUPERTECH or FERREA valves, OEM or +1.00mm, reinforced springs, CATCAMS cam followers, SUPERTECH guides, seals and collets, ARP2000 head studs in M10 or M11, ATHENA or COMETIC gasket. VIBRA-TECHNICS Ibiza 6K2 mounts.

  • SEAT Ibiza Cupra R 6K 1.8T 180hp AYP 2000-2002
    SEAT Ibiza Cupra R 6K 1.8T 180hp AYP 2000-2002

    The 180hp SEAT Ibiza Cupra R 6K 1.8T, built from 2000 to 2002, uses the 1.8T 20V with code AYP. Sixteen active references, the same as on the Cupra AQX AYP page.

    Bottom end: 1.8T 20V forged pistons with 20mm pin by DIAMOND, JE, SUPERTECH, WISECO or WOSSNER, from 81 to 83mm; main, tanged big end and thrust bearings by ACL RACE or KING RACING; ARP main studs for the chain driven oil pump.

    Head: SUPERTECH or FERREA valves, OEM or +1.00mm, reinforced springs, CATCAMS cam followers, SUPERTECH guides, seals and collets, ARP2000 head studs in M10 or M11, ATHENA or COMETIC gasket. VIBRA-TECHNICS Ibiza 6K2 mounts.

Showing 1 - 35 of 35 items
SEAT Ibiza 6K
The Ibiza 6K breaks down into four sub-pages: the 101bhp 1.4 16V coded AFH, AQQ and AUB, the 150bhp 2.0 16V ABF, the 156bhp Cupra 1.8T coded AQX and AYP, and the 180bhp Cupra R 1.8T coded AYP. Thirty-five live lines are attached directly to it. The ARP fasteners cover both families at once, the naturally aspirated 16V and the 1.8T 20V. Valve springs come in Catcams Sport, Catcams Race and Supertech. The Kent Cams uprated timing belt is quoted for the Ibiza 2.0 16V. Wössner, Wiseco or JE Pistons forged pistons and ZRP EA827 rods complete the rotating assembly.