SEAT Leon 1M

Manufacturers

SEAT Leon 1M

SEAT Leon 1M

SEAT Leon 1M 

There are 29 products.

Subcategories

  • SEAT Leon 1M 1.8T 180hp AJQ APP ARY AUQ 1999-2006
    SEAT Leon 1M 1.8T 180hp AJQ APP ARY AUQ 1999-2006

    The 180hp SEAT Leon 1M 1.8T 20V, built from 1999 to 2006, uses the EA113 with codes AJQ, APP, ARY or AUQ. Eighteen active references.

    What sets it apart from the Cupra R AMK and BAM: a set of 4 ZRP I-beam forged con rods for a 19mm pin, whose sheet names the AJQ, APP, ARY and AUQ, instead of the long rods.

    Shared base: 1.8T forged pistons by DIAMOND, JE, SUPERTECH, WISECO or WOSSNER, SUPERTECH or FERREA valves, springs, CATCAMS cam followers, SUPERTECH guides and seals, ARP studs, COMETIC or ATHENA gasket, ACL RACE or KING RACING bearings, uprated clutch.

  • SEAT Leon 1M VR6 2.8 204hp BDE 2002-2004
    SEAT Leon 1M VR6 2.8 204hp BDE 2002-2004

    The 204hp SEAT Leon 1M VR6 2.8 24V, built from 2002 to 2004, uses the BDE. Fourteen active references, identical to those of the Cupra BDE page.

    Valve train: CATCAMS sport camshafts for the BDE, shared with the R32 BFH and BML, from 7607421 to 7607502. CATCAMS springs, FERREA S10087 spring and FERREA E11063 titanium retainer.

    Bottom end: VR6 24V forged pistons by JE Round, WOSSNER or WISECO in 81 to 83mm, ratio from 8.5 to 10.8:1; set of 6 BOOSTLINE I-3P or ZRP I-HD con rods; ACL RACE or KING RACING big end, main bearings and thrust washers; ARP 8740 main studs, ARP2000 con rod bolts.

    ATHENA MLS gasket, VIBRA-TECHNICS Leon 1M engine mount.

  • SEAT Leon Cupra 1M VR6 2.8 204hp AUE 2001-2006
    SEAT Leon Cupra 1M VR6 2.8 204hp AUE 2001-2006

    The 204hp SEAT Leon Cupra 1M VR6 2.8 24V, built from 2001 to 2006, uses the AUE. Fourteen active references, the same as on the BDE pages apart from the camshaft.

    Head: CATCAMS sport camshafts specific to the AQP and AUE, from 7607601 to 7607605; CATCAMS springs or FERREA S10087 spring and FERREA E11063 titanium retainer, single or as a kit; ATHENA MLS gasket.

    Bottom end: VR6 24V forged pistons by JE Round, WOSSNER or WISECO from 81 to 83mm, 20mm pin; 6 BOOSTLINE or ZRP con rods; ACL RACE or KING RACING bearings; ARP fasteners. VIBRA-TECHNICS Leon 1M engine mount.

  • SEAT Leon Cupra 1M VR6 2.8 204hp BDE 2001-2006
    SEAT Leon Cupra 1M VR6 2.8 204hp BDE 2001-2006

    The 204hp SEAT Leon Cupra 1M VR6 2.8 24V, built from 2001 to 2006, uses the BDE. Fourteen active references, identical to those of the Leon 1M BDE page.

    Valve train: CATCAMS sport camshafts for the BDE, shared with the R32 BFH and BML, from 7607421 to 7607502. CATCAMS springs, FERREA S10087 spring and FERREA E11063 titanium retainer.

    Bottom end: VR6 24V forged pistons by JE Round, WOSSNER or WISECO in 81 to 83mm, ratio from 8.5 to 10.8:1; set of 6 BOOSTLINE I-3P or ZRP I-HD con rods; ACL RACE or KING RACING big end, main bearings and thrust washers; ARP 8740 main studs, ARP2000 con rod bolts.

    ATHENA MLS gasket, VIBRA-TECHNICS Leon 1M engine mount.

  • SEAT Leon Cupra R 1M 1.8T 209hp AMK 2002-2006
    SEAT Leon Cupra R 1M 1.8T 209hp AMK 2002-2006

    The 209hp SEAT Leon Cupra R 1M 1.8T 20V, built from 2002 to 2006, uses the EA113 with code AMK. Eighteen active references, the same as on the Cupra R BAM page.

    What sets the Cupra R pages apart from the 180hp AJQ APP ARY AUQ: ZRP H-Lite long forged con rods with 147.2mm centre to centre length, 20mm pin, ARP2000 or L19 bolts, whose sheet names the AMK.

    1.8T forged pistons by DIAMOND, JE, SUPERTECH, WISECO or WOSSNER from 81mm; 12 intake and 12 exhaust valves by SUPERTECH or FERREA, springs, CATCAMS cam followers, SUPERTECH guides, stem seals and collets; ARP2000 and 8740 studs, COMETIC or ATHENA gasket, ACL RACE or KING RACING bearings, uprated clutch.

  • SEAT Leon Cupra R 1M 1.8T 225hp BAM 2003-2006
    SEAT Leon Cupra R 1M 1.8T 225hp BAM 2003-2006

    The 225hp SEAT Leon Cupra R 1M 1.8T 20V, built from 2003 to 2006, uses the EA113 with code BAM. Eighteen active references, the same as on the Cupra R AMK page.

    What sets the Cupra R pages apart from the 180hp AJQ APP ARY AUQ: ZRP H-Lite long forged con rods with 147.2mm centre to centre length, 20mm pin, ARP2000 or L19 bolts, whose sheet names the BAM.

    1.8T forged pistons by DIAMOND, JE, SUPERTECH, WISECO or WOSSNER from 81mm; 12 intake and 12 exhaust valves by SUPERTECH or FERREA, springs, CATCAMS cam followers, SUPERTECH guides, stem seals and collets; ARP2000 and 8740 studs, COMETIC or ATHENA gasket, ACL RACE or KING RACING bearings, uprated clutch.

Showing 1 - 29 of 29 items
SEAT Leon 1M
The Leon 1M brings two mechanical worlds together: the 1.8T 20V, at 180bhp coded AJQ, APP, ARY and AUQ, then as the 209bhp Cupra R coded AMK and the 225bhp one coded BAM, and the 204bhp VR6 2.8 coded AUE and BDE. Six sub-pages follow from that. Twenty-eight live lines are attached directly. The VR6 side is the better served: Athena head gasket, Catcams valve springs, ACL Race main bearings, ZRP forged rods and forged pistons in JE Pistons, Wössner or Wiseco. The 1.8T side brings the ARP fasteners, an uprated clutch and a model-specific engine mount.