Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
SEAT Ibiza Cupra 6J 1.4 TSI 180hp CAVE CTHE CTJC 2009-2015
Manufacturers
SEAT Ibiza Cupra 6J 1.4 TSI 180hp CAVE CTHE CTJC 2009-2015
Set of 4 forged 4340 connecting rods for Audi/Volkswagen 1.4 TSI EA111.Brands: ZRP Compatibility: VW Golf V/VI, Scirocco, Jetta ; Audi A1 ; SEAT ; Škoda Octavia, Yeti Engine codes: CAVD, CAXA Bolts included: ARP 2000 or L19
Set of 4 forged 4340-steel connecting rods for the VAG 1.4 TSI EA111 (rifle-drilled).Brand : ZRP Compatibility : Golf, Polo, Ibiza (VAG) Engine codes : CAVD, CAXA, CAVA, BLG, CAX, CAV, CVA Bolts included : ARP 2000 or L19
EA111 1.4 TSI/TFSI 16v (76.5 mm) forged pistons: sorted specs (Volume ratio 10.0:1, Pin 19 mm, CH 28.97), CAXA/CAXC/CAVD compatibility + Audi/VW/Seat/Skoda vehicle table and OEM refs.
Complete kit for the VAG 1.4 TSI twincharged 160 to 180 hp, 16 valves: 16× CATCAMS PAC-E99864 outer valve springs + 16× CATCAMS 99480/S steel upper retainers. Engine codes CAVE, CAVD, CTHE. Maximum load 60 kg at 12.0 mm lift.
Reinforced head gasket, Cometic in MLX and Athena in MLS. Sold individually, one gasket per engine.Brands: Cometic and AthenaEngines: 1.4 L 16VBores: 77 mm and 77.8 mmThicknesses: 0.81 to 1.02 mmReplaces: 03C 103 383 AM, R, AE, AH
CATCAMS Sport camshafts for VAG 1.4 TSI CAVE CAVD CTHE engine:SEAT Ibiza Cupra 6J 2009 - 2015VW New Beetle 2011 - 2016VW Golf 6 2008 - 2016VW Polo GTI 6R 2010 - 2014VW Scirocco 3 2008 - 2017CATCAMS reference: 7608001, 7608002, 7608003
VIBRA-TECHNICS uprated engine and gearbox mount for SEAT Ibiza 6J:SEAT Ibiza 6J 2008 - 2017
The SEAT Ibiza Cupra 6J 1.4 TSI 180hp, built from 2009 to 2015, runs the EA111 twincharged engine, codes CAVE, CTHE and CTJC.
Cylinder head: CATCAMS Sport camshafts 7608001 to 7608003 and a CATCAMS kit of 16 outer valve springs with 16 steel retainers. Bottom end: WOSSNER, JE Round or WISECO AP forged EA111 pistons from 76.5mm to 77.5mm, 19mm gudgeon pin, and two sets of 4 ZRP forged connecting rods, ARP 2000 or L19 bolts. Also listed: an ATHENA or COMETIC head gasket and VIBRA-TECHNICS mounts.
The ACL RACE / KING RACING bearings on this page are listed for the EA888: check before ordering.
