Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
HONDA INTEGRA Coupé 1.8 VTiR (DC2) 170HP B18C2
Manufacturers
HONDA INTEGRA Coupé 1.8 VTiR (DC2) 170HP B18C2
Kit of 8 exhaust valve guides for Honda B and H series, 5.5 mm stem.Brands: FERREA, SUPERTECH Engines: B16A, B17A1, B18C, H22A Material: copper bronze or manganese bronze Sizes: standard or +0.025 mm
Set of 8 exhaust valve stem seals for Honda 16-valve four-cylinder engines, 5.5 mm stem.Brands: FERREA, SUPERTECH Engines: B16, B17, B18, D15, D16, D17, F20C, F22, H22, K20, K24, L15, R18 Material: Viton (FKM)
Set of 4 forged 4340 steel rods for the naturally aspirated Honda B18C 1.8 16V VTEC, 21 mm piston pin.Brands: ZRP, Boostline and Manley Compatibility: Integra Type R/GS-R (DC2, DB8) Engine codes: B18C / B18C1 to C7 Bolts included: ARP 2000, L19 or CA 625+
Kit of 8 inlet valve guides for Honda B and H series, 5.5 mm stem.Brands: FERREA, SUPERTECH Engines: B16A, B17A1, B18C, H22A Material: copper bronze or manganese bronze Sizes: standard or +0.025 mm
Set of 8 inlet valve stem seals for Honda 16-valve four-cylinder engines, 5.5 mm stem.Brands: FERREA, SUPERTECH Engines: B16, B17, B18, D15, D16, D17, F20C, F22, H22, K20, K24, L15, R18 Material: Viton (FKM) or polyacrylate (ACM)
Set of 8 trimetal connecting rod half-bearings for the Honda B18C.Brands and treatments: ACL Race, ACL Calico and King Racing XPC Compatibility: Integra Type R, Integra VTi-R, Acura Integra Engine codes: B18C1, B18C2, B18C5, B18C7 Available sizes: standard to +0.25 mm, increased-clearance versions (HX, STDX)
This page currently lists a single family for the HONDA Integra Coupé 1.8 VTiR DC2, B18C2 engine, 170hp: the set of four forged 4340 steel connecting rods with a 21mm gudgeon pin. Three ranges are offered, ZRP, MANLEY and BOOSTLINE, each split by rod beam type and by bolt grade, ARP 2000, L19 or Custom Age 625+. The forged rod allows the revs and the boost pressure a standard rod will not take.
