Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
HONDA Civic VII (EU, EP, EV) 2001-2005
Manufacturers
HONDA Civic VII (EU, EP, EV) 2001-2005
Subcategories
Every performance engine part we stock for the HONDA Civic VII 1.7 131hp, engine code D17A1 (EU3, EU4).
The cylinder head is covered by the COMETIC MLS head gasket bored to 76.00mm, offered in twelve compressed thicknesses from 0.68mm to 2.13mm to set the compression ratio, by the SUPERTECH intake and exhaust valve guides and by the 5.5mm valve stem seals.
The page also carries SUPERTECH stainless steel and Inconel valves, dual valve springs with steel or titanium retainers, collets and ACL RACE and KING RACING tri-metal bearings.
The valve train of the HONDA Civic VII 1.7 130hp, engine code D17A2 (EM2, ES1), and everything around it.
The SUPERTECH sets of eight intake and exhaust valves come in stainless steel and in Inconel, in standard size as well as +0.50mm and +1.00mm oversize for a head that has already been refaced. They are completed by dual valve springs with steel or titanium retainers, single groove collets and 5.5mm valve stem seals.
The page also carries the COMETIC MLS head gasket and ACL RACE and KING RACING bearings.
The rotating assembly of the HONDA Civic VII 1.7 125hp, engine code D17A6 (EK9), and the top end that goes with it.
The ACL RACE and KING RACING big end and main bearings cover standard size, the wider HX clearance and the +0.025mm, +0.25mm and +0.50mm repair sizes, with one range carrying the pMaxKote anti-friction coating. The thrust washers take up the axial clearance.
The page also carries the COMETIC MLS head gasket, SUPERTECH valves and valve springs.
The ten parts kept for the HONDA Civic VII 1.7 120hp, engine code D17Z1 (ES1).
The COMETIC MLS head gasket bored to 76.00mm is offered here in twelve thicknesses, together with the SUPERTECH valve guides, the 5.5mm stem seals, the dual springs with steel or titanium retainers and the collets. The bottom end is served by ACL RACE and KING RACING tri-metal bearings and by the thrust washers.
This page carries no valve set: those sit on the D17A versions.
The performance engine parts of the HONDA Civic VII 2.0 i Sport 160hp, engine code K20A3 (EV1).
The set of four 4340 steel forged connecting rods comes from BOOSTLINE, MANLEY, WÖSSNER and ZRP, in H or I beam and with ARP2000, CA625+ or L19 bolts. On the head side, the SUPERTECH steel intake and Inconel exhaust valves measure 30mm across the head for a 5.45mm stem, with matching stem seals and collets.
The bottom end takes ACL RACE and KING RACING bearings.
The best stocked page of the Civic VII range: the HONDA Civic Type-R 200hp, engine code K20A2 (EP3).
Three sets of 4340 steel forged connecting rods sit here, the standard length from BOOSTLINE, MANLEY, WÖSSNER and ZRP, then two ZRP lengths meant for a stroker build, 135.5mm and 148.5mm. Two sets of sixteen SUPERTECH dual valve springs with titanium retainers go with the steel and Inconel valves.
ACL RACE and KING RACING bearings complete the bottom end.
Set of 8 trimetal connecting rod half-bearings for Honda D15, D16, ZC, B20B.Brands and treatments: ACL Race, King XP, King XPC (pMaxKote) Compatibility: Civic, CRX, Concerto, Accord, Integra, City, HR-V, CR-V Engine codes: D15, D16, ZC, B20B Available sizes: standard to +0.25 mm, increased-clearance version (HX / STDX)
ACL Race trimetal connecting rod bearings for the Honda F23A, F23Z and K20A3.
Set of 8 SUPERTECH exhaust valve guides for the HONDA 1.6 D16Y7 D16Y8 D16Z 1.7 D17
Set of 8 SUPERTECH exhaust valve guides for the Honda K20 / K24 2.0 and 2.4 16V DOHC VTEC. Manganese bronze, for 5.5 mm valve stems. Outside diameter 11.065 mm, length 45.6 mm.
Exhaust valves INCONEL SUPERTECH 30x5.45x108.65mm for HONDA RSX-S / TSX. Fits HONDA RSX-S and TSX, engine codes K20A, K20Z (2.0) and K24 (2.4). Set of 8 valves.
Tri-metal big end bearings KING RACE, OEM size for HONDA 2.0 DOHC 16V K20A3
Set of 8 SUPERTECH intake valve guides for the Honda K20 / K24 2.0 and 2.4 16V DOHC VTEC. Manganese bronze, for 5.5 mm valve stems. Outside diameter 11.065 mm, length 41.6 mm.
Steel Intake Valves Supertech HONDA 2.0 K20A/Z 2.4 K24
ARP2000 rod bolts replacing the original bolts on OEM rods of Honda and Acura K20A and K20Z engines.Brand: ARP Engine: K20A, K20A1, K20A2, K20A3, K20A4, K20A5, K20A6, K20A7, K20A8, K20A9, K20Z1, K20Z2, K20Z3, K20Z4 Dimensions: 3/8 in x 38 mm Grade: ARP2000
Kit of ARP 8740 cylinder head studs for the Honda K20A2 and K20A3 four-cylinders (Civic Type R EP3, Civic 2.0i Sport).Brand: ARP Engines: K20A2, K20A3 Thread: 7/16 in Grade: 8740
Reinforced Cometic head gasket, in multi-layer MLS. Sold individually, one gasket per engine.Engines: Honda 1.7 L 16V D17A1, D17A2, D17A6Bore: 76, 77, 78 or 79 mm (MLS)Thickness: 0.69 to 3.56 mm, 18 values per boreReplaces: 12251-PLC-003
Reinforced Athena and Cometic head gasket, in Cut Ring, MLS and MLX for K20A and K20Z1. Sold individually.Brands: Athena, CometicEngines: K20A, K20A1, K20A2, K20A3, K20A4, K20A5, K20A9, K20Z1, K24A1Bores: 86 to 90 mmThicknesses: 0.46 to 3.56 mm
Kit of 16 reinforced double valve springs with SUPERTECH retainers for HONDA: Honda Civic VI 1.6 (EK1) 107hp D16Y7; Honda CRX III 1.6i (EG1) 107hp D16Y7; Honda Civic VI 1.6 (EJ8) 118hp D16Y8; Honda Civic VI 1.6i VTEC (EM1) 125hp D16Y8; Honda Civic VI 1.6i VTEC (EJ8) 129hp D16Y8; Honda CRX III 1.6 Si (EH6) 129hp D16Y8; Honda Civic V 1.6 (EG5) 125hp D16Z6;...
High-quality SUPERTECH SPRK-H1022D Double Reinforced Valve Springs - K20/K24 F20C F22C Honda Acura (SUPERTECH SPRK-H1022D Double Reinforced Valve Springs K20/K24 F20C) for reliable fitment and performance.
Set of 8 SUPERTECH performance exhaust valves for HONDA D15B, D16Y6/Y7/Y8/Z6, D17A and R18A engines. Fits HONDA Civic IV, V, VI, VII, VIII and IX, CRX II and III. Engine codes: D15B1; D15B2; D15B4; D15B6; D15B7; D15B8; D16Y7; D16Y8; D16Z6; D17A1; D17A2; D17A6; R18A1; R18A2.
Kit of 8 reinforced intake valves SUPERTECH for HONDA D15B, D16Y6/Y7/Y8/Z6, D17A, R18A
Set of 32 SUPERTECH valve collets for 5.5mm valves: Choice of keeper grooves Reference: KPR-5.5-7A-ST-32 Fits Honda F20C, D16Z6, D16Y8, D16Y6, D16Y7, D15B, D17A, H22A VTEC, CR-Z, LEA, L15A, F22C, K20A4, K24Z7 DOHC VTEC, K20C1, B16A, B17A, R18A SOHC I-VTEC, K24A2, K20A2, K20A3, K20Z1, K20Z3, K24Z1, K24Z3; Acura B18C5, B18C1, K24A2, K24Z7 DOHC VTEC, B16A,...
Set of 8 SUPERTECH 5.5mm valve stem seals for the exhaust valves, HONDA. Exhaust side only: the intake valve version is a separate item.Fitment (engine code): 1.5L 16v - L15A LEA; 1.6L 16v - B16A; 1.7L 16v - B17A; 1.7L 16v - D17; 1.8L 16v - B18C1; 1.8L 16v - B18C5; 2.0L 16v - F20C; 2.0L 16v - K20A/Z; 2.2L 16v - F22C; 2.2L 16v - H22; 2.4L 16v - K24; 1.6L...
Set of 8 SUPERTECH valve stem seals 5.5mm for the INTAKE valves of HONDA L15 B16 B17 D16 D17 B18 F20 F22 H22 K20 K24 R18Fits Honda 1.5L 16v L15A LEA, 1.6L 16v B16A, 1.7L 16v B17A, 1.7L 16v D17, 1.8L 16v B18C1, 1.8L 16v B18C5, 2.0L 16v F20C, 2.0L 16v K20A/Z, 2.2L 16v F22C, 2.2L 16v H22, 2.4L 16v K24, 1.6L 16v D16Z, 1.6L 16v D16Y7, 1.6L 16v D16Y8, 1.8L 16v...
Set of ACL RACE / KING RACING thrust washers for HONDA 1.5 1.6 1.8 2.0 2.2 2.3 2.4 engines
Tri-metal main bearings ACL RACE / KING RACING for HONDA B16 B17 B18 B20 K20 K24
Tri-metal main bearings ACL RACE / KING RACING for HONDA B18A B20 B21 D16 D17 F23 H22
Set of 8 trimetal connecting rod half-bearings for the Honda K20 and K24.Brands and treatments: ACL Race, ACL Calico and King Racing XPC Compatibility: Civic Type R, Integra Type R, Accord, CR-V, Element, Odyssey Engine codes: K20A2, K20Z1, K20C1, K24A1, K24A3, K24A4, K24A8, K24Z1 Available sizes: standard to +0.50 mm, increased-clearance versions (HX,...
High-quality Reinforced Valve Springs HONDA 2.0 F20C K20A/Z 2.2 F22C 2.4 K24 (Reinforced Valve Springs HONDA 2.0 F20C K20A/Z 2.2) for reliable fitment and performance.
kit 16 half-moons / keys for SUPERTECH valves-diameter 5.5mm:Number of groove(s) to choose fromReference:-KPR-5.5-7A-ST-16
Reliability and build parts for the HONDA Civic VII (EU, EP, EV) 2001-2005: 1.7 D17A1, D17A2, D17A6, D17Z1, the 2.0 K20A3 of the EV1 and the 2.0 K20A2 of the Type R EP3.
