HONDA Civic VIII FA FD 2005-2013

Manufacturers

HONDA Civic VIII FA FD 2005-2013

HONDA Civic VIII FA FD 2005-2013

HONDA Civic VIII FA FD 2005-2013 

There are 18 products.

Subcategories

  • HONDA CIVIC VIII (FD, FA) 1.5 i-VTEC 120hp L15A7
    HONDA CIVIC VIII (FD, FA) 1.5 i-VTEC 120hp L15A7

    The 1.5 i-VTEC L15A7 of the Honda Civic VIII (FD, FA) is covered here from the bottom end right up to the cylinder head. It is the best stocked page of this generation.

    Rotating assembly: JE PISTONS, WISECO and WÖSSNER forged pistons in 2618 alloy, 73.00mm and 73.50mm bores, compression ratios from 9:1 to 12.5:1, 18mm gudgeon pin. KING RACING bi-metal main bearings and ACL / KING RACING thrust washers. Cylinder head: SUPERTECH intake and exhaust valves in stainless steel or Inconel, a set of sixteen single valve springs with retainers, 5.5mm collets and valve stem seals. ARP head studs and ARP2000 con rod bolts complete the build.

  • HONDA CIVIC VIII (FD, FA) 1.8 140hp R18A1
    HONDA CIVIC VIII (FD, FA) 1.8 140hp R18A1

    The 1.8 R18A1 powers the four-door Honda Civic VIII (FD, FA). This page brings together the parts listed to build it, centred on the rotating assembly.

    The forged pistons come in two WISECO ranges, the standard series and the AP series, each in 81.00mm and 81.50mm bore, at a 9:1 compression ratio, with a 20mm gudgeon pin. The cylinder head is covered by SUPERTECH intake and exhaust valves, 5.5mm collets and valve stem seals. The very same references suit the R18A2 of the three-door version, both engines sharing one architecture.

  • HONDA CIVIC VIII 1.8 (FN1,FK2) 140hp R18A2
    HONDA CIVIC VIII 1.8 (FN1,FK2) 140hp R18A2

    The 1.8 R18A2 powers the three-door Honda Civic VIII (FN1, FK2). This page gathers its build parts, with the emphasis on the cylinder head.

    The SUPERTECH intake and exhaust valves come in three sizes, original, +0.50mm and +1.00mm, in stainless steel or in Inconel depending on the size chosen, alongside SUPERTECH collets and 5.5mm valve stem seals. The bottom end takes WISECO and WISECO AP forged pistons in 81.00mm and 81.50mm. Stock here is the same as on the saloon R18A1: both engines share one base.

Showing 1 - 18 of 18 items
HONDA Civic VIII FA FD 2005-2013

Engine parts for the HONDA Civic VIII FA FD (2005-2013): the 1.5 i-VTEC L15A7 and the 1.8 R18A1 and R18A2.

  • Forged pistons for the 1.5 L15A and the 1.8 R18
  • SUPERTECH intake and exhaust valves, springs, stem seals and collets
  • Bi-metal big end and main bearings, plus thrust washers
  • ARP head studs and con rod bolts
  • COMETIC head gaskets in 86mm, 87mm and 88mm bore, for the K20A, K20Z and K24 engines

Select your engine code to see only the parts that fit.