Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
1.7 16v - B17A
Manufacturers
1.7 16v - B17A
Forged pistons Honda B17A 1.7L - bores 81-82 mm, compression ratio 8.1-11.1:1, gudgeon pin 21 mm. Ranges available: Wiseco, Wiseco AP. Full data sheet + fitment and vehicles.
Forged pistons B16A (Honda 1.6L DOHC VTEC): bores 81-86 mm, various domes, 21 mm pins. Brands Wiseco/JE/Wössner/Supertech/Manley. Vehicle table (Civic SiR, CR-X SiR, Integra XSi)
Tri-metal big end bearings KING RACE, OEM size, for HONDA 1.7 DOHC 16V B17A1
ARP2000 connecting rod bolt and nut kit replacing the original bolts on OEM rods of Honda B16A, B17A and B18 engines.Brand: ARP Engine: B16A, B17A, B18 Dimensions: M9 Grade: ARP2000
Kit of ARP 8740 cylinder head studs for the Honda and Acura B-series four-cylinders (Integra).Brand: ARP Engines: B17A1, B18A1, B18B1, B18C1, B18C5 Thread: 7/16 in Grade: 8740
ARP 8740 steel crankshaft main studs for the Honda and Acura B-family four-cylinder engines (B17A, B18).Brand: ARP Engine: B17A / B18 16V Thread: 7/16 in Grade: 8740
High-quality Reinforced Exhaust valves HONDA 1.6 B16A 1.7 B17A (Reinforced Exhaust valves HONDA 1.6 B16A 1.7 B17A) for reliable fitment and performance.
Reinforced Athena and Cometic head gasket, in MLS and MLX for VTEC B-series. Sold individually.Brands: Athena, CometicEngines: B16A, B16A1, B16A2, B16A3, B17A1, B18C, B18C1, B18C5Bores: 81 to 86.5 mmThicknesses: 0.60 to 3.56 mm
High-quality Reinforced Valve Springs HONDA 1.6 B16A B16A1 B16A2 B16A3 1.7 B17A (Reinforced Valve Springs HONDA 1.6 B16A B16A1 B16A2) for reliable fitment and performance.
Set of 32 SUPERTECH valve collets for 5.5mm valves: Choice of keeper grooves Reference: KPR-5.5-7A-ST-32 Fits Honda F20C, D16Z6, D16Y8, D16Y6, D16Y7, D15B, D17A, H22A VTEC, CR-Z, LEA, L15A, F22C, K20A4, K24Z7 DOHC VTEC, K20C1, B16A, B17A, R18A SOHC I-VTEC, K24A2, K20A2, K20A3, K20Z1, K20Z3, K24Z1, K24Z3; Acura B18C5, B18C1, K24A2, K24Z7 DOHC VTEC, B16A,...
Set of 8 SUPERTECH valve guides, intake or exhaust of your choice, for HONDA 1.6 B16A B16A1 B16A2 B16A3 and 1.7 B17A enginesOuter diameter 12.07mm, for 5.5mm valve stems, length 46.7mm (exhaust) or 44.8mm (intake), bronze
Set of 8 SUPERTECH 5.5mm valve stem seals for the exhaust valves, HONDA. Exhaust side only: the intake valve version is a separate item.Fitment (engine code): 1.5L 16v - L15A LEA; 1.6L 16v - B16A; 1.7L 16v - B17A; 1.7L 16v - D17; 1.8L 16v - B18C1; 1.8L 16v - B18C5; 2.0L 16v - F20C; 2.0L 16v - K20A/Z; 2.2L 16v - F22C; 2.2L 16v - H22; 2.4L 16v - K24; 1.6L...
Set of 8 SUPERTECH valve stem seals 5.5mm for the INTAKE valves of HONDA L15 B16 B17 D16 D17 B18 F20 F22 H22 K20 K24 R18Fits Honda 1.5L 16v L15A LEA, 1.6L 16v B16A, 1.7L 16v B17A, 1.7L 16v D17, 1.8L 16v B18C1, 1.8L 16v B18C5, 2.0L 16v F20C, 2.0L 16v K20A/Z, 2.2L 16v F22C, 2.2L 16v H22, 2.4L 16v K24, 1.6L 16v D16Z, 1.6L 16v D16Y7, 1.6L 16v D16Y8, 1.8L 16v...
Set of ACL RACE / KING RACING thrust washers for HONDA 1.5 1.6 1.8 2.0 2.2 2.3 2.4 engines
Big end bearing set, tri-metal, ACL Race / King Racing, for HONDA A18 A20 B16 B17 B18 B20 F18 F20
Tri-metal main bearings ACL RACE / KING RACING for HONDA B16 B17 B18 B20 K20 K24
kit 16 half-moons / keys for SUPERTECH valves-diameter 5.5mm:Number of groove(s) to choose fromReference:-KPR-5.5-7A-ST-16
The HONDA 1.7 16v VTEC B17A is the 1.7 litre DOHC unit fitted to the Integra. This page gathers the parts we actually list for it.
You will find Wiseco forged piston kits, performance exhaust valves with their springs, Supertech valve guides, collets and valve stem seals, reinforced head gaskets including the 85mm Cometic, King Race tri-metal big end bearings, tri-metal main bearings and thrust washers.
ARP fasteners finish the job: head studs, main studs and con rod bolts.
