Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
HONDA CRX II 1.6 Si (ED9) 110hp D16A6
Manufacturers
HONDA CRX II 1.6 Si (ED9) 110hp D16A6
Set of 8 trimetal connecting rod half-bearings for Honda D15, D16, ZC, B20B.Brands and treatments: ACL Race, King XP, King XPC (pMaxKote) Compatibility: Civic, CRX, Concerto, Accord, Integra, City, HR-V, CR-V Engine codes: D15, D16, ZC, B20B Available sizes: standard to +0.25 mm, increased-clearance version (HX / STDX)
Reinforced Athena and Cometic head gasket, in MLS and MLX for D15B and D16A6. Sold individually.Brands: Athena, CometicEngines: D15B1, D15B2, D15B7, D15B8, D16A6, D16A7Bores: 75.5 to 79 mmThicknesses: 0.69 to 3.56 mmReplaces: 12251-PM5-S01
Set of ACL RACE / KING RACING thrust washers for HONDA 1.5 1.6 1.8 2.0 2.2 2.3 2.4 engines
Tri-metal main bearings ACL RACE / KING RACING for HONDA B18A B20 B21 D16 D17 F23 H22
The D16A6 of the Honda CRX II 1.6 Si 110hp is a bearing page: it gathers the three bearing stages of the crankshaft and nothing else.
The tri-metal big end bearings come in standard size, in standard size with the wider HX clearance, and in repair sizes of +0.025mm, +0.026mm, +0.25mm and +0.50mm. The main bearings follow the same sizes up to +0.25mm. The thrust washers, which take up the axial clearance, complete the set.
All three parts are available from ACL RACE and from KING RACING, so the whole bottom end can be built with a single brand.
