Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
BMW 135i E82/E88 306hp N54B30 2007-2010
Manufacturers
BMW 135i E82/E88 306hp N54B30 2007-2010
DINAN performance panel air filter D401-0035 for BMW fitted with the N54B30 3.0 litre twin-turbo.Fits BMW 135i E82/E88 (N54B30), BMW 1M E82 (N54B30), BMW 335i E90/E92/E93 (N54B30), BMW Z4 35i E89 (N54B30). Drops straight into the standard airbox in place of the OEM filter, for more airflow and a stronger induction note.Please note: clearance item, no...
Exhaust Supertech Valve Stem Gaskets forBMW / TOYOTA B58 N53 N54 N55 S55BMW 135i M135i M140i 1M E8X F2XBMW M235i M240i M2 CS M2 COMPetition F22 F87 G42BMW 325i 330i 335i 340i M340i M3/CS/COMPET E9X F30 F80 G20BMW 435i 440i M4/COMPET/GTS F32 F82BMW 523i 525i 528i 530i 535i 540i E60 F10 F90 G30BMW 630i 640i E63 F13BMW Z4 3.0i M40i E89 G29TOYOTA Supra/GR
Set of 6 forged connecting rods in 4340 steel for the BMW 3.0L 24V Twin-Turbo N54B30.Brands: ZRP, Manley, Boostline Compatibility: BMW 135i, 1M, 335i, 335is, 535i, 740i, X6 35i, Z4 35i/35is Engine codes: N54B30 Bolts included: ARP 2000, L19 or CA625+
BMW N54B30 3.0L forged pistons: bores 84 / 84.5mm, compression ratio 9.0 - 10.5:1, 22mm gudgeon pin. Manley, JE, Diamond and Wössner quality; comparison table, engine & vehicle compatibilities included.
Intake Valve Stem Gaskets SupertechBMW / TOYOTA B58 N53 N54 N55 S55BMW 135i M135i M140i 1M E8X F2XBMW M235i M240i M2 CS M2 COMPetition F22 F87 G42BMW 325i 330i 335i 340i M340i M3/CS/COMPET E9X F30 F80 G20BMW 435i 440i M4/COMPET/GTS F32 F82BMW 523i 525i 528i 530i 535i 540i E60 F10 F90 G30BMW 630i 640i E63 F13BMW Z4 3.0i M40i E89 G29TOYOTA Supra/GR
Reinforced Athena and Cometic head gasket, in O-Ring and MLX. Sold individually.Brands: Athena, CometicEngines: N54B30Bores: 85 to 86 mmThicknesses: 0.81 to 1.85 mmReplaces: 11 12 7 557 265
Set of 12 reinforced exhaust valves for BMW N54B30.Brands: SUPERTECH, FERREA Engines: N54B30 Dimensions: 28.0 mm or 28.5 mm head, 6 mm stem Material: Inconel, sodium filled Inconel or Super Alloy, 1 or 3 grooves
Set of 12 reinforced inlet valves for BMW N54B30.Brands: SUPERTECH, FERREA Engine: N54B30 Dimensions: 31.4 mm, 31.5 mm, 31.9 mm or 32.0 mm head, 5 mm stem Material: black nitride stainless steel, single groove (SUPERTECH); FERREA 3 grooves
Kit of 24 reinforced valve springs for BMW N53, N54, N55 and S55.Brands: SUPERTECH, FERREA Engines: N53B30, N54B30, N55B30, S55B30 Springs: single Contents: springs, titanium retainers
Catcams Sport Camshafts for BMW 3.0 24V N54B30:BMW 135 i / 1M E82 / E88 2007 - 2013BMW 335 JE-E90 / E91 / E92 / E93 2006 - 2012BMW Z4 3.0i E89 2009 - 2016References Catcams: 1305001, 1305002, 1305003
Kit of 24 half-moon valve collets for SUPERTECH / FERREA valves, 6mm diameter:Number of grooves of your choiceReferences: KPR-6S-7-24, KPR-VW6-T-24
Set of 14 tri-metal crankshaft main bearing half shells for BMW N54B30, N55B30 and S55B30 engines (Ø 64.96 and 55.96 mm).Brands and treatments: ACL Race and King Racing (polymer coating, GPC version) Fitments: BMW 1 to 7 Series, X1, X3 to X6, Z4, M2, M3, M4 Available sizes: standard to +0.50 mm, increased clearance versions (HX / STDX)
Set of 12 trimetal connecting rod half-bearings for BMW N54B30 N55B30 S55B30.Brands and treatments: ACL Race, ACL Calico and King GPC Compatibility: E82, E90, F20, F22, F30, F32, F80, F82 Engine codes: N54B30, N55B30, S55B30 Available sizes: standard to +0.50 mm, increased-clearance versions (HX, STDX)
Kit of 24 valve collets for SUPERTECH / FERREA valves, 5mm diameter: Number of grooves of your choiceReference: KPR-5.0-7S-24
This page covers the 3.0 L 24V N54B30 twin-turbo six-cylinder of the BMW 135i E82 and E88, 306hp, from 2007 to 2010.
The bottom end is the best stocked part of this page. Forged pistons run from 84 to 85mm bore, with a 22mm gudgeon pin, from 9:1 to 10.5:1 compression, in the MANLEY, WÖSSNER, DIAMOND, JE and WISECO ranges. Forged connecting rods come from ZRP, MANLEY and BOOSTLINE, with ARP2000, L19 or CA625+ bolts. Tri-metal big end and main bearings are offered by ACL RACE and KING RACING, from standard to oversize. Then come SUPERTECH and FERREA valves, springs, stem seals, collets, CATCAMS camshafts and the head gasket.
