RENAULT 5

Manufacturers

RENAULT 5

RENAULT 5

RENAULT 5 

There are 5 products.

Subcategories

  • RENAULT 5 Alpine Turbo 108hp 840 726 / C6J 750 1981-1985
    RENAULT 5 Alpine Turbo 108hp 840 726 / C6J 750 1981-1985

    The 108hp RENAULT 5 Alpine Turbo, built from 1981 to 1985, uses the 1.4 8V 840 726, also coded C6J 750. Three active references.

    CATCAMS sport camshafts in three references, 5500210, 5500227 and 5500230, and CATCAMS vernier cam pulley, common to the 840 726, 840 730 and C6J 750 engines.

    WOSSNER forged pistons for the 840 726 in 76, 76.6, 77, 78 or 80mm bore, compression ratio from 7.5 to 7.9:1, suited to forced induction.

    No con rod, bearing or head gasket is linked to this page.

  • RENAULT 5 Turbo 160hp 840 730 1980-1985
    RENAULT 5 Turbo 160hp 840 730 1980-1985

    The 160hp RENAULT 5 Turbo, Turbo 1 from 1980 to 1982 then Turbo 2 from 1983 to 1985, uses the 1.4 8V 840 730. Three active references.

    Forged pistons for the 840 730 in 76, 77 or 78mm bore, 20mm gudgeon pin: JE Round at 7:1, WOSSNER from 7 to 7.3:1.

    CATCAMS sport camshafts in two references, 5500122 and 5500130, and CATCAMS vernier cam pulley, shared with the 5 Alpine Turbo.

    No con rod, bearing or head gasket is linked to this page so far.

Showing 1 - 5 of 5 items
RENAULT 5
RENAULT 5 is a junction page covering the first generation, 1980 to 1985. Two sub-categories split it by engine: RENAULT 5 Alpine Turbo 108cv 840 726 / C6J 750 1981-1985, and RENAULT 5 Turbo 160cv 840 730 1980-1985, the mid-engined homologation car. Two 1.4 blocks, and in both cases the work starts at the bottom end. Held here: CATCAMS performance camshafts for the 840 726 and for the 840 730, a CATCAMS adjustable cam pulley, and forged piston kits from WÖSSNER and JE PISTONS. For the following generation, 1985 to 1990, see the Super 5 page.