RENAULT Megane 1

Manufacturers

RENAULT Megane 1

RENAULT Megane 1

RENAULT Megane 1 

There are 21 products.

Subcategories

  • RENAULT Megane 1 1.6 16V 107hp K4M 1998-2003
    RENAULT Megane 1 1.6 16V 107hp K4M 1998-2003

    The 107hp RENAULT Megane 1 1.6 16V, built from 1998 to 2003, uses the K4M. Six active references, identical to those of the Clio 2 K4M page.

    Rotating assembly: WOSSNER forged pistons for the K4M in 79.5, 80 or 80.5mm bore, compression ratio from 12.7 to 13:1, for a naturally aspirated build.

    Valve train: CATCAMS sport camshafts for the K4M 708, fourteen references, set of 16 mechanical cam followers, springs for heads with CATCAMS rockers or SUPERTECH dual springs, CATCAMS vernier pulleys.

    No con rod, bearing or head gasket on this page.

  • RENAULT Megane 1 2.0 16V 147hp F7R 710/714 1996-2003
    RENAULT Megane 1 2.0 16V 147hp F7R 710/714 1996-2003

    The 147hp RENAULT Megane 1 2.0 16V, built from 1996 to 2003, uses the F7R 710 or 714. Fifteen active references, the Clio Williams F7R stock without its valves or mounts.

    Rotating assembly: F7R forged pistons by WOSSNER, JE FSR or WISECO from 82.7 to 84mm, 21mm gudgeon pin, F7RR pistons in 84 or 84.5mm, ZRP I-beam con rods, ZRP crankshaft, stock or 90mm destroke, ACL RACE or KING RACING bearings.

    Head: CATCAMS sport camshafts in eleven references, CATCAMS cam followers and springs, CATCAMS or KENT CAMS pulleys, COMETIC or ATHENA gasket, 148-tooth KENT CAMS cam belt.

Showing 1 - 21 of 21 items
RENAULT Megane 1
RENAULT Megane 1 is the only Megane here that covers two different engine families. The 2.0 16V Coupe runs the 147hp F7R 710/714, the same block as the Clio Williams, while the 1.6 16V of 1998-2003 runs the 107hp K4M 708. Both entries are on this page: 2.0 16V 147hp F7R 710/714 1996-2003 and 1.6 16V 107hp K4M 1998-2003. This is also where you pick your piston maker, Wössner, JE Pistons or Wiseco, and your head gasket, ATHENA or COMETIC. Add KENT CAMS timing belts, CATCAMS camshafts, cam followers and valve springs, ARP big end bolts, ACL and KING RACING tri-metal bearings, ZRP forged rods and crankshafts. To start from the engine code, see 2.0L 16v - F7R.