RENAULT Megane 4

Manufacturers

RENAULT Megane 4

RENAULT Megane 4

RENAULT Megane 4 

There are 2 products.

Subcategories

  • RENAULT Megane 4 1.6 TCe 165/205hp M5M 450 2015-
    RENAULT Megane 4 1.6 TCe 165/205hp M5M 450 2015-

    The RENAULT Megane 4 1.6 TCe, 165 or 205hp, built since 2015, uses the M5M 450, a turbo block shared with the Nissan MR16DDT. Two active references, the same as on the Clio 4 RS pages.

    WISECO forged pistons for the M5M and MR16DDT, in 79.7, 79.8 or 80mm bore, compression ratio 9.5:1.

    COMETIC MLX head gasket at 81.0mm, listed by its product sheet for the M5M 400, 401 and 450, in four thicknesses: 0.71, 0.81, 1.02 or 1.37mm, to set the compression after skimming.

    No con rod or bearing on this page so far.

Showing 1 - 2 of 2 items
RENAULT Megane 4
RENAULT Megane 4 leaves behind the F7R and F4R line of the three earlier generations. It runs the M5M 450, the 1.6 direct injection turbo born of the Renault-Nissan alliance and listed at Nissan as the MR16DDT: either code leads to the same block. One entry, 1.6 TCe 165/205hp M5M 450 2015-, and two bottom end references chosen one by one rather than inherited: forged pistons by WISECO and the reinforced cylinder head gasket by COMETIC. Neither brand appears directly on the Megane 1, 2 and 3, and not a single part is shared with them. For the engine code route, see 1.6L 16v - M5M.