RENAULT Clio 1

Manufacturers

RENAULT Clio 1

RENAULT Clio 1

RENAULT Clio 1 

There are 21 products.

Subcategories

  • RENAULT Clio 1 1.8 16V 135hp F7P 722 1991-1996
    RENAULT Clio 1 1.8 16V 135hp F7P 722 1991-1996

    The 135hp RENAULT Clio 1 1.8 16V, built from 1991 to 1996, uses the F7P 722. Fourteen active references.

    Rotating assembly: F7P forged pistons by WISECO, WOSSNER, JE or JE FSR in 82 to 83.5mm bore, ratio from 8 to 12.3:1, 21mm gudgeon pin; ZRP I-beam forged con rods, ARP2000 or L19 bolts; ACL RACE or KING RACING bearings.

    Valve train: CATCAMS sport camshafts in eleven references, 16 CATCAMS cam followers and valve springs, CATCAMS or KENT CAMS pulleys, 148-tooth KENT CAMS uprated cam belt.

    COMETIC or ATHENA gasket, VIBRA-TECHNICS road mounts, POWERFLEX bush.

  • RENAULT Clio Williams 147hp F7R 700 1994-1998
    RENAULT Clio Williams 147hp F7R 700 1994-1998

    The 147hp RENAULT Clio Williams, built from 1994 to 1998, uses the F7R 700. Nineteen active references.

    F7R forged pistons by WOSSNER, JE FSR or WISECO in 82.7 to 84mm bore, 21mm gudgeon pin, ratio from 8.5 to 12.8:1, and F7RR pistons from the Clio Maxi in 84 or 84.5mm, 18mm pin. ZRP con rods, ZRP crankshaft, stock or 90mm destroke, ACL RACE or KING RACING bearings.

    Head: SUPERTECH or CATCAMS valves, intake OEM or +1.00mm, exhaust OEM or +0.25mm, CATCAMS camshafts, cam followers and valve springs, 148-tooth KENT CAMS cam belt.

    VIBRA-TECHNICS mounts, POWERFLEX bush.

Showing 1 - 21 of 21 items
RENAULT Clio 1
RENAULT Clio 1 opens on the two naturally aspirated F7 engines of the nineties: Clio 1 1.8 16V 135hp F7P 722 1991-1996 and Clio Williams 147hp F7R 700 1994-1998. It is the Clio page where rival makers meet on the same part: forged pistons from WISECO, WÖSSNER and JE PISTONS, forged rods from ZRP, WÖSSNER and MANLEY, tri-metal big end bearings from ACL Race and KING RACING, reinforced head gaskets from ATHENA and COMETIC. Around them sit CATCAMS camshafts, valve springs and cam followers, SUPERTECH valves, KENT CAMS timing belts, ARP rod bolts, POWERFLEX and VIBRA-TECHNICS mounts, F7RR pistons and two forged crankshafts, one destroked to 90mm. Pick your version, then arbitrate between makers.