RENAULT 19

Manufacturers

RENAULT 19

RENAULT 19

RENAULT 19 

There are 11 products.

Subcategories

  • RENAULT 19 1.8 16V 135hp F7P 704 1989-1996

    The 135hp RENAULT 19 1.8 16V, built from 1989 to 1996, uses the F7P 704. Eleven active references, the Clio 1 1.8 16V F7P stock without cam belt or mounts.

    Rotating assembly: F7P forged pistons by WISECO, WOSSNER, JE or JE FSR in 82 to 83.5mm bore, ratio from 8 to 12.3:1, 21mm gudgeon pin; ZRP I-beam forged con rods, ARP2000 or L19 bolts; ACL RACE or KING RACING tanged big end and main bearings, ACL RACE thrust washers; ARP con rod bolts.

    Head: CATCAMS sport camshafts in eleven references, 16 CATCAMS cam followers and valve springs, CATCAMS or KENT CAMS pulleys, COMETIC or ATHENA gasket.

Showing 1 - 11 of 11 items
RENAULT 19
RENAULT 19 opens onto a single sub-category, RENAULT 19 1.8 16V 135cv F7P 704 1989-1996, and it is the page of this section where you weigh up makers rather than hunt for one reference. Connecting rods come from ZRP, WÖSSNER and MANLEY; bearings from ACL Race and KING RACING; head gaskets from COMETIC and ATHENA; adjustable cam pulleys from KENT CAMS and CATCAMS. Add CATCAMS camshafts, mechanical cam followers and uprated valve springs, plus ARP big end bolts. The F7P 704 is shared with the Clio 16S, so the 1.8L 16v - F7P page is worth a look.