1.6L 16v - K4M
Manufacturers
1.6L 16v - K4M

Catcams Sport Camshafts for 1.6 16V K4M 708 engine: RENAULT Clio 2 1.6 16V 1998 - 2005 RENAULT Megane 1 1.6 16V 1999 - 2003REFERENCES 5506702, 5506704, 5506705
Table K4M 1.6 16v forged pistons (O 79.50 mm, COMPression ratio 9.8:1, Pin 20 mm, CH 31.70 mm). Engine, vehicle compatibilities (Clio, Megane, Scenic, Laguna, Logan, Duster) and OEM references.
High-quality Mechanical tappets RENAULT Clio Megane F4R K4M 708 (Mechanical tappets RENAULT Clio Megane F4R K4M 708) for reliable fitment and performance.
High-quality Reinforced Valve Springs RENAULT F4R K4M 708 equipped with Catcams latches (Reinforced Valve Springs RENAULT F4R K4M 708 equipped) for reliable fitment and performance.
CATCAMS sport camshafts for the 1.6 16V K4M 854 engine:RENAULT Twingo 2 RS 2008 - 2014CATCAMS references: 5504701, 5504702
Set of 8 trimetal connecting rod half-bearings for Renault, Dacia and Nissan E5F, E6J, E7F, E7J, K7J, K7M, K4J, K4M, C1G, C1J, C2J, C2L, C3J, C6J (Ø 44 mm).Brand and treatment: ACL Race Compatibility: Renault Clio, Mégane, 19, Super 5, Kangoo ; Dacia Logan, Sandero Engine codes: E5F, E6J, E7F, E7J, K7J, K7M, K4J, K4M, C1G, C1J, C2J, C2L, C3J, C6J...
VIBRA-TECHNICS uprated engine and gearbox mount for the 1.6 16V K4M 854 engine:RENAULT Twingo 2 RS 2008 - 2014
Kit of uprated valve springs SUPERTECH / CATCAMS for the 1.6 / 2.0 16V F4R 730, F4R 738, F4R 774, F4R 830, F4R 874 and K4M 708 engine:RENAULT Clio 2 1.6 16V 1998 - 2005 RENAULT Clio 2 RS 2000 - 2009 RENAULT Clio 3 RS 2006 - 2012 RENAULT Megane 1 1.6 16V 1999 - 2003 RENAULT Megane 2 RS 2004 - 2009 RENAULT Megane 3 RS 2009 - 2015
CATCAMS vernier cam pulleys for 1.6/2.0 16V F4R 730, F4R 738, F4R 830 and K4M 708 engines:RENAULT Clio 2 1.6 16V 1998 - 2005 RENAULT Clio 2 RS 2000 - 2009 RENAULT Clio 3 RS 2006 - 2012 RENAULT Megane 1 1.6 16V 1999 - 2003
The K4M page covers two versions of the same 1.6-litre 16-valve block: the naturally aspirated K4M 708 of the Renault Clio and Megane, and the turbocharged K4M 854 of the Twingo 2 RS. It is above all a valvetrain and cylinder head page: CATCAMS sport camshafts for both, adjustable cam pulleys, mechanical cam followers, valve springs and rockers, with springs by SUPERTECH or CATCAMS depending on the option. The bottom end comes down to one WÖSSNER forged piston kit, 79.5mm bore at 12.7:1. VIBRA-TECHNICS mounts target the Twingo 2 RS. The head parts are listed by the maker as shared between the K4M 708 and F4R heads.