AUDI A4 S4 RS4 B7

Manufacturers

AUDI A4 S4 RS4 B7

AUDI A4 S4 RS4 B7

AUDI A4 S4 RS4 B7 

There are 21 products.

Subcategories

  • AUDI A4 B7 1.8T 163hp BFB 2004-2009
    AUDI A4 B7 1.8T 163hp BFB 2004-2009
    The Audi A4 B7 carries over the 1.8T 20V engine code BFB rated 163hp, from 2004 to 2009. This page brings together the ZRP set of four 4340 steel forged rods with a 19mm pin, listed for the EA113 and supplied with ARP 2000 or L19 bolts, DIAMOND, JE PISTONS, WISECO, WÖSSNER and SUPERTECH forged pistons in 81.0 to 83.0mm bores, ACL and KING RACING big end and main bearings, ARP head studs and main studs, an ATHENA or COMETIC uprated head gasket, FERREA and SUPERTECH valves, SUPERTECH springs, guides, stem seals and collets, and CAT CAMS cam followers. The vernier cam pulley, listed for the B6, is not part of this page.
  • AUDI S4 B7 4.2 40V 344hp BHF 2005-2009
    AUDI S4 B7 4.2 40V 344hp BHF 2005-2009
    The same 4.2 40V V8, engine code BHF rated 344hp, powers the Audi S4 B7 from 2005 to 2009, so the performance parts on this page are those of the S4 B6 applied to the B7 generation. You will find SUPERTECH Inconel exhaust valves, SUPERTECH intake valves, valve springs, intake and exhaust valve stem seal kits, and the 80-piece collet kit for 6mm stems. The bottom end is not covered. The COMETIC head gasket shown here is listed for the VAG R32 VR6 3.2, not for the 4.2 V8.
Showing 1 - 21 of 21 items
AUDI A4 S4 RS4 B7

This hub page covers the Audi A4 of the B7 generation and the S4, with 21 active references and two sub-pages: A4 1.8T 163hp code BFB and S4 4.2 40-valve V8 344hp code BHF. As both engines carry over from the B6, the stock is the same as on the A4 S4 RS4 B6 page.

For the 1.8T 20V, forged pistons, bearings, valves, springs, cam followers, guides, stem seals, head gasket and ARP studs. For the 4.2 V8, dedicated valves, springs and stem seals.