Manufacturers

AUDI TT 8N

AUDI TT 8N 

There are 29 products.

Subcategories

  • AUDI TT 8N 1.8T 150hp AUM 2001-2006
    AUDI TT 8N 1.8T 150hp AUM 2001-2006
    This page brings together the sixteen parts currently available for the Audi TT 8N 1.8 T 20V 150hp, AUM engine. It covers the cylinder head as well as the bottom end: FERREA and SUPERTECH inlet and exhaust valves, valve springs, CAT CAMS solid cam followers and adjustable cam pulley, guides, stem seals and 6mm collets, a COMETIC 82.0mm or ATHENA 83.0mm head gasket, ARP head and main studs, ACL RACE and KING RACING bearings, forged pistons from 81 to 83mm at 8.5:1 to 9.7:1, and VIBRA-TECHNICS engine mounts. Forged connecting rods are not listed here: they are grouped on the 180hp and 225hp quattro pages of the same 1.8 T.
  • AUDI TT 8N 1.8T 163cv BVP 2005-2006
    AUDI TT 8N 1.8T 163cv BVP 2005-2006
    The 163hp BVP version of the 1.8 T 20V was only fitted to the TT 8N for the 2005 and 2006 model years. Eight parts are listed here, all aimed at the bottom end and at sealing: a COMETIC 82.0mm or ATHENA 83.0mm head gasket, ARP2000 M11 head studs, ARP 8740 main studs, ACL RACE and KING RACING big end and main bearings, DIAMOND, JE PISTONS, WISECO, WÖSSNER and SUPERTECH forged pistons from 81 to 83mm, a CAT CAMS adjustable cam pulley and VIBRA-TECHNICS engine mounts. Valves, springs and forged connecting rods for the same block are grouped on the 180hp and 225hp quattro pages.
  • AUDI TT 8N 1.8T 180cv AJQ APP ARY ATC AUQ AWP 1998-2006
    AUDI TT 8N 1.8T 180cv AJQ APP ARY ATC AUQ AWP 1998-2006
    The 180hp 1.8 T 20V is the most common engine in the TT 8N range: six engine codes, AJQ, APP, ARY, ATC, AUQ and AWP, covering the whole life of the car from 1998 to 2006. Seventeen parts are listed, including the ZRP I-beam forged connecting rods with ARP2000 bolts for a 19mm gudgeon pin, which belong to this page alone. Alongside them you will find FERREA and SUPERTECH valves, springs, solid cam followers and the CAT CAMS adjustable cam pulley, guides, stem seals and 6mm collets, a COMETIC 82.0mm or ATHENA 83.0mm head gasket, ARP studs, ACL RACE and KING RACING bearings, forged pistons from 81 to 83mm and VIBRA-TECHNICS mounts.
  • AUDI TT 8N 1.8T Quattro 225cv APX BAM BEA 1998-2006
    AUDI TT 8N 1.8T Quattro 225cv APX BAM BEA 1998-2006
    The 225hp 1.8 T 20V with quattro drive, engine codes APX, BAM and BEA, carries the widest selection of the TT 8N range: eighteen parts currently available. This page is the only one to list the ZRP H-Lite forged connecting rods, 147.2mm long centres and a 20mm gudgeon pin, with ARP2000 bolts. It also gathers FERREA and SUPERTECH valves, springs, solid cam followers and the CAT CAMS adjustable pulley, guides, stem seals and 6mm collets, a COMETIC 82.0mm or ATHENA 83.0mm head gasket, ARP studs, forged pistons from 81 to 83mm and VIBRA-TECHNICS mounts. One set of tangless big end bearings is listed here for the 2.0 TFSI EA888: please check the part number before ordering.
  • AUDI TT 8N 1.8T Quattro 245cv BFV 2005-2006
    AUDI TT 8N 1.8T Quattro 245cv BFV 2005-2006
    The 245hp BFV is the most powerful version of the 1.8 T 20V, fitted to the quattro TT 8N for the 2005 and 2006 model years only. Eight parts are listed here and they all address the bottom end: DIAMOND, JE PISTONS, WISECO, WÖSSNER and SUPERTECH forged pistons from 81 to 83mm, with compression ratios from 8.5:1 to 9.7:1, ACL RACE and KING RACING big end and main bearings, ARP 8740 main studs, ARP2000 M11 head studs, a COMETIC 82.0mm or ATHENA 83.0mm head gasket, a CAT CAMS adjustable cam pulley and VIBRA-TECHNICS engine mounts. Valves, springs and forged rods for the same block are listed on the 180hp and 225hp quattro pages.
  • AUDI TT 8N 3.2 V6 250hp BHE 2003-2006
    AUDI TT 8N 3.2 V6 250hp BHE 2003-2006
    The only naturally aspirated engine in the TT 8N range, the 3.2 VR6 24V with the BHE code has fifteen parts of its own here: DIAMOND, JE PISTONS, WISECO and WÖSSNER forged pistons at 84mm with compression ratios from 8:1 to 11.2:1, ZRP I-HD and BOOSTLINE I-3P forged connecting rods, all with ARP2000 bolts, ARP rod bolts and main studs, a COMETIC head gasket, SUPERTECH and FERREA inlet and exhaust valves, SUPERTECH springs, 6mm collets for 24 valves, ACL, ACL RACE and KING RACING bearings, 1200cc high flow injectors and VIBRA-TECHNICS engine mounts. The other rods shown on the page belong to different engines: please check the engine code before ordering.
Showing 1 - 29 of 29 items
AUDI TT 8N

This hub page covers the Audi TT of the 8N generation, with 29 active references and six sub-pages: 1.8T 150hp code AUM, 163hp code BVP, 180hp, Quattro 225hp and Quattro 245hp code BFV, and 3.2 V6 250hp code BHE.

For the 1.8T 20V, forged pistons, bearings, valves, springs, cam followers, stem seals, head gasket, ARP studs and uprated engine mount. For the 3.2 VR6, forged pistons and rods, ACL and KING RACING bearings, SUPERTECH springs, COMETIC gasket, ARP fasteners and FIC injectors.