Manufacturers

AUDI S2 RS2

AUDI S2 RS2 

There are 17 products.

Subcategories

  • AUDI S2 2.2T 20V 220hp 3B 1990-1992
    AUDI S2 2.2T 20V 220hp 3B 1990-1992
    This page brings together the thirteen parts currently available for the Audi S2 2.2 T 20V 220hp, 3B engine. It covers the cylinder head as well as the bottom end: SUPERTECH and FERREA inlet and exhaust valves, SUPERTECH valve springs, guides, stem seals and 7mm collets for the 20 valves, an ATHENA O-ring head gasket in 82.00mm and 1.60mm thickness, ARP head studs, KING RACING main bearings and thrust washers, ZRP forged I-beam connecting rods with L19 bolts and WISECO, WÖSSNER and JE PISTONS forged pistons in 81mm from 7.2:1 to 8.5:1. The sport camshaft and the solid cam followers are listed on the 230hp ABY page of the same engine.
  • AUDI S2 2.2T 20V 230hp ABY 1992-1996
    AUDI S2 2.2T 20V 230hp ABY 1992-1996
    This page brings together the fifteen parts currently available for the Audi S2 2.2 T 20V 230hp, ABY engine. It is the only S2 or RS2 page to offer a sport camshaft and a set of solid cam followers, on top of the range shared by the whole 2.2 20V: SUPERTECH and FERREA inlet and exhaust valves, valve springs, guides, stem seals and 7mm collets for the 20 valves, an ATHENA O-ring head gasket in 82.00mm and 1.60mm thickness, ARP head studs, KING RACING main bearings and thrust washers, ZRP forged I-beam connecting rods with L19 bolts and WISECO, WÖSSNER and JE PISTONS forged pistons in 81mm from 7.2:1 to 8.5:1.
  • AUDI RS2 2.2T 20V 315hp ADU 1994-1995
    AUDI RS2 2.2T 20V 315hp ADU 1994-1995
    This page brings together the fifteen parts currently available for the Audi RS2 2.2 T 20V 315hp, ADU engine. Two references are found here only: a WISECO forged piston in 81.5mm at 9:1 intended for engines fitted with the 92.80mm crankshaft, and a hydraulic cam follower sold individually. The rest covers the cylinder head and the bottom end: SUPERTECH and FERREA valves, valve springs, guides, stem seals and 7mm collets, an ATHENA O-ring head gasket in 82.00mm, ARP head studs, KING RACING main bearings and thrust washers, ZRP forged I-beam connecting rods with L19 bolts and forged pistons in 81mm from 7.2:1 to 8.5:1.
Showing 1 - 17 of 17 items
AUDI S2 RS2

This hub page covers the Audi S2 and RS2 with the 2.2T 20-valve five-cylinder, with 16 active references and three sub-pages: S2 220hp code 3B, S2 230hp code ABY and RS2 315hp code ADU.

The stock covers the whole engine: forged pistons and rods, main bearings and thrust washers, valves, springs, guides, stem seals and collets, sport camshaft, cam followers, uprated head gasket and ARP studs. Choose the sub-page for your version.