Manufacturers

AUDI A3 S3 8L

AUDI A3 S3 8L 

There are 26 products.

Subcategories

  • AUDI A3 8L 1.8T 150hp AGU AQA ARX ARZ AUM 1996-2003
    AUDI A3 8L 1.8T 150hp AGU AQA ARX ARZ AUM 1996-2003
    Twenty-one uprated references for the Audi A3 8L 1.8T 20V 150hp, engine codes AGU, AQA, ARX, ARZ and AUM, built from 1996 to 2003. This is the only 8L page carrying all three sets of ZRP forged connecting rods for the EA113, including a long 147.2mm centre to centre set on a 20mm gudgeon pin that no other engine in the range repeats. The bottom end follows: forged pistons chosen on the option, ACL tri-metal big end and main bearings, ARP head studs and main studs, a COMETIC MLS head gasket in 82.0mm. On the head, SUPERTECH valves, springs, guides, stem seals and collets, CATCAMS mechanical cam followers and NGK spark plugs.
  • AUDI A3 8L 1.8T 180hp AJQ APP ARY AUQ 1998-2003
    AUDI A3 8L 1.8T 180hp AJQ APP ARY AUQ 1998-2003
    Eighteen uprated references for the Audi A3 8L 1.8T 20V 180hp, engine codes AJQ, APP, ARY and AUQ, built from 1998 to 2003. This page covers the shared core of the 1.8T 20V, with no forged rods and no uprated mount: EA113 forged pistons, a COMETIC MLS head gasket in 82.0mm, ARP head studs and main studs, ACL tri-metal big end and main bearings. The cylinder head is complete, with SUPERTECH intake and exhaust valves, springs, guides, stem seals and collets, including an Inconel exhaust valve at 29.90mm. CATCAMS mechanical cam followers, NGK spark plugs, an uprated clutch and an uprated engine mount round it off.
  • AUDI S3 8L 1.8T 210hp AMK APY 1999-2002
    AUDI S3 8L 1.8T 210hp AMK APY 1999-2002
    Twenty-six uprated references for the Audi S3 8L 1.8T 20V 210hp quattro, engine codes AMK and APY, built from 1999 to 2002. Four parts here are absent from the A3 8L pages: the ARP con rod bolts, the KS Kolbenschmidt crankshaft thrust washers specific to the quattro block, and the POWERFLEX torque mounts, offered in PERFORMANCE and BLACK SERIES on both the large and the small side. Two sets of ZRP forged connecting rods on a 20mm gudgeon pin complete the bottom end, with the forged pistons, ACL tri-metal bearings, ARP studs and the COMETIC MLS head gasket. On the head, SUPERTECH valves, springs, guides, stem seals and collets, CATCAMS cam followers and NGK spark plugs.
  • AUDI S3 8L 1.8T 225hp BAM 2001-2003
    AUDI S3 8L 1.8T 225hp BAM 2001-2003
    Twenty-six uprated references for the Audi S3 8L 1.8T 20V 225hp quattro, engine code BAM, built from 2001 to 2003. The BAM is the last evolution of the 1.8T 20V and shares the uprated catalogue of the 210hp AMK APY exactly: the stock on this page is identical to it, reference by reference. It carries the ARP con rod bolts, the ARP head studs and main studs, the KS Kolbenschmidt thrust washers, the four POWERFLEX torque mounts, two sets of ZRP forged connecting rods, the forged pistons, the ACL tri-metal bearings and the COMETIC MLS head gasket in 82.0mm. On the head, SUPERTECH valves, springs, guides, stem seals and collets, CATCAMS cam followers and NGK spark plugs.
Showing 1 - 26 of 26 items
AUDI A3 S3 8L

This hub page covers the Audi A3 and S3 of the 8L generation, all with the 1.8T 20-valve engine, with 25 active references and four sub-pages: A3 150hp, A3 180hp, S3 210hp codes AMK and APY, S3 225hp code BAM.

The stock gathers forged pistons and rods, bearings, valves including SUPERTECH Inconel exhaust valves, springs, cam followers, CAT CAMS vernier pulley, head gasket, ARP studs, uprated clutch, engine mount and POWERFLEX bushes for the S3.