Categories
Manufacturers
Categories
COOL IT Clamp-on Thermal Insulation 10.16 x 30.48cm for PipeReduces heat transfer (blocks 95% of radiant heat).Generic Photo
COOL IT Clamp-on Thermal Insulation 15.24 x 91.44cm for PipeReduces heat transfer (blocks 95% of radiant heat).Generic Photo
Pack 4 Spark NGK ignition plugs for PEUGEOT 806, TCT 2.0 8V XU10J2TE 147hp engine from June 1994 to August 2002
COOL IT 1219.2mm x 1219.2cm thermal and acoustic insulation, composed of reflective silicates and dual-density acoustic insulation sandwiched between a Mylar layer and an aluminum layer.Reduces heat and noise transmission within the passenger compartment. Can be installed on the firewall, transmission tunnel, and vehicle interior (doors, roof, etc.).
Reinforced collar, diameter 92-97mm, in AISI 304 stainless steel
silencer stainless group N RC RACING reference KET348-GN
Pack of 2 COOL IT BLACK graphite thermal insulation tapes for exhaust systems, 50.8mm wide, 15.2M long
REDOX silicone water hose kit (4 hoses) for RENAULT Megane 3 RS 2.0 16V F4R 874 11/2008-
RC RACING sport catalytic converter made of 304L stainless steel, with with welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameters, manifold flange modifications, vehicle/competition specifics, etc.).Not road legal.
Adapter for mounting an oil cooler, DASH10 inlet/outlet for VOLKSWAGEN 2.8 24V VR6
High-quality Reinforced Cylinder head studs ARP HONDA S2000 2.0 16V V-Tec F20C 1999-2009 (Reinforced Cylinder head studs ARP HONDA S2000 2.0) for reliable fitment and performance.
BREEZY 235mm 16-row matrix oil cooler kit, DASH10 male connections with 85A deg C MOCAL thermostatic sandwich plate
RC RACING intermediate silencer made of 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, manifold flange modification, vehicle/competition specifications, etc.).Not road legal.
rings for 6 pistons JE Pistons JG1006-3346. NSB CONCEPT. Fast shipping!
POWERFLEX BLACK SERIES Rear Subframe Bushing kit (4 Bushings) for AUDI S3 (8L), 1.8T 20V Quattro Engine from November 1998 to June 2003 The "Black Series" range from industry leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds to Part...
POWERFLEX BLACK SERIES Rear Axle/Differential Bushing kit (2 Bushings) for AUDI S3 (8L), 1.8T 20V AWD engine from November 1998 to June 2003 The "Black Series" range from industry leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds to...
kit of 2 POWERFLEX BLACK SERIES Front axle / rear differential bushings for AUDI S3 (8L), 1.8T 20V AWD engine from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: POWERFLEX BLACK SERIES Front Axle/Rear Differential Bushing kit 2 Bushings for AUDI S3 8L 1 8T 20V AWD Engine from.
POWERFLEX BLACK SERIES Steering Rack 2-Bundle kit for AUDI S3 (8L), 1.8T 20V AWD Engine from November 1998 to June 2003 The "Black Series" range from industry leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds to Reference 7 (see below):
kit of 4 POWERFLEX BLACK SERIES Rear Inner Arm Bushings for AUDI S3 (8L), 1.8T 20V AWD engine from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: POWERFLEX BLACK SERIES Rear Control Arm Inner Bushing kit for AUDI S3 8L 1 8T 20V AWD engine from November.
FERODO DS2500 front brake pads (set) for AUDI S3 (8L), 1.8T 20V Quattro engine from November 1998 to June 2003
Muffler outlet Features:Outlet type: ovalInner diameter of inlet: 60.3mmOutlet dimensions: 128 x 80mmLength: 180mm
FERODO DS2500 brake pads, reference FCP1112H
kit 2 hard silent blocks POWERFLEX BLACK SERIES reference PFR5-4618BLK
Bottines Alpinestars TECH 1-Z homologated FIA. NSB CONCEPT. Fast shipping!
POWERFLEX PERFORMANCE Rear Crossmember 2-Pack Hard Bushing kit for BMW E34The "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Part 6 (see below):
High-quality Reinforced Crankshaft bearing studs ARP AUDI 2.5 TFSI DAZA DNWA RS3 TTRS (Reinforced Crankshaft studs ARP AUDI 2.5 TFSI DAZA) for reliable fitment and performance.
ARP reinforced cylinder head studs for BMW / MINI 2.0 16V B48A20 B48A20B engine. compatible with MINI Cooper S F56 2013- and MINI Cooper John Cooper Works F56 2015-.
XPC Series tri-metal connecting rod bearings with pMaxKote ceramic coating for Nissan GT-R R35 VR38DETT 3.8L 24V. Made in Israel. Housing 56.896-59.012mm. Thickness 1.510mm. STD size.
ACL Race Series 5M1219H Trimetal Crankshaft Bearing Set
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B8351H
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B8172H
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B1490H, Size +0.25
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B603H, Size 020
GOODRIDGE aviation brake hose kit for CITROEN DS3
GOODRIDGE braided brake hose kit for BMW M3 (F80) / M4 (F82) from 2014
GOODRIDGE braided brake hose kit for MASERATI 4200GT Spider from 2002 onwards
SACHS OEM clutch release bearing, reference 3151 826 001SACHS OEM clutch release bearings have all the same technical specifications as the original bearings.Image for illustrative purposes only
SACHS OEM clutch release bearing, part number 3151 600 594SACHS OEM clutch release bearings have all the same technical specifications as the original bearings.Image for illustrative purposes only
SACHS OEM clutch release bearing, reference 3151 231 031SACHS OEM clutch release bearings have all the same technical specifications as the original bearings.Image for illustrative purposes only
KENT CAMS reinforced timing belt for OPEL Calibra, 2.0 16V C20XE engine from 1988 to 1992 - 141 teeth belt
SAFFA reinforced clutch mechanism for SUZUKI Vitara 1.6i For 200mm diameter discThe reinforced mechanisms have the same dimensions and tolerances as the series, but with increased plate pressure, as well as tabs reinforced cushioning. Non-contractual photo
SAFFA reinforced clutch mechanism for RENAULT Clio 16S 1.8 16V F7P 135hp 1992-1996
SAFFA Reinforced Clutch Mechanism for PEUGEOT 306 XSI, 2.0 8V engine from 1994 to 1997For 215mm diameter discPull-type clutchThe reinforced mechanisms have the same dimensions and tolerances as the standard model, but with increased pressure plate and damping tabs Reinforced. Photo not contractual
SAFFA Reinforced Clutch Mechanism for PEUGEOT 306 XSI, 2.0 16V engine from 1997 to 1999For 215mm diameter discPull-type clutchThe reinforced mechanisms have the same dimensions and tolerances as the standard model, but with increased pressure plate and damping tabs Reinforced. Photo not contractual
SAFFA reinforced clutch mechanism for PEUGEOT 205 GTI 1.6 1.9 XU5J reinforced mechanisms have the same dimensions and tolerances as the series, but with increased plate pressure, as well as reinforced damping tabs. Non-contractual photo
SAFFA reinforced clutch mechanism for LANCIA Delta II, 2.0 16V engine from 1994 to 2000For 215mm diameter discThe reinforced mechanisms have the same dimensions and tolerances as the series, but with increased plate pressure, as well as reinforced damping tabs. Non-contractual photo
Reinforced SAFFA clutch mechanism for AUTOBIANCHI A 112 Abarth from 1969 to 1985For disc diameter 170mmThe reinforced mechanisms have the same dimensions and tolerances as the series, but with pressure on the plate increased, as well as reinforced cushioning tabs. Non-contractual photo
SAFFA rigid sintered metal reinforced clutch disc with 4 pads for VW GOLF IV, 1.9 TDI engine from 1997 to 2004
SAFFA Rigid Sintered Metal Reinforced Clutch Disc with 3 Pads for SUZUKI Samurai SJ413, 1.3 8V Engine from 1989 to 2003Technical Information:Diameter: 190mmNumber of Splines: 20 Disc compatible with original mechanism but Attention Your original mechanism will wear out faster than a reinforced mechanism.
SAFFA rigid sintered metal reinforced clutch disc with 5 pads for RENAULT Clio III RS, 2.0 16V engine from 2006 to 2012
Reinforced sintered metal clutch disc with 4 damped pads, SAFFA, for RENAULT 5 GT Turbo, 1.4 8V engine from 1985 to 1991Technical Information:Diameter: 200mmNumber of splines: 26 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a replacement mechanism reinforced.
SAFFA rigid sintered metal reinforced clutch disc with 4 pads for PEUGEOT 306 XSI, 2.0 8V engine from 1994 to 1997Technical Information:Diameter: 215mmNumber of splines: 18 Disc compatible with original mechanism but Attention Your original mechanism will wear out faster than a reinforced mechanism.
Valve spring upper retainer for LANCIA Delta Integrale / FIAT Coupe 2.0 16V engines.
SAFFA 3-pad sintered metal reinforced clutch disc for PEUGEOT 106 XT, 1.4 8V engineTechnical Information:Diameter: 180mmNumber of splines: 18 Disc compatible with original mechanism but note your original mechanism will wear out faster than a new one reinforced.
SAFFA 3-pad sintered metal reinforced clutch disc for PEUGEOT 205, 1.3 8V engine from 1989 to 1992Technical Information:Diameter: 180mmNumber of splines: 18 Disc compatible with original mechanism but note your original mechanism will wear out faster than a reinforced mechanism.
GOODRIDGE aviation brake hose kit with TAV certificate for Ferrari F430
VAG VW 1.8 Clutch release bearing Sachs Golf II GTi 16v
ACL Races Series Trimetal Connecting Rod Bearing Set, Part Number 6B1515H, Size: ORIGINAL
High-quality Double reinforced valve springs + cups + SUPERTECH spacers, max lift: 14mm OPEL 2.0 16V C20XE, C20LET (Double reinforced valve springs cups SUPERTECH spacers max) for reliable fitment and performance.