Manufacturers

PEUGEOT 306

PEUGEOT 306 

There are 35 products.

Subcategories

  • PEUGEOT 306 1.4 8V 75hp TU3JP 1993-2002
    PEUGEOT 306 1.4 8V 75hp TU3JP 1993-2002

    Page dedicated to the TU3JP, the 75hp 1.4 8V of the PEUGEOT 306 (1993-2002). The selection covers the valvetrain and the bottom end.

    Valvetrain: CATCAMS Sport camshaft in nine references, a set of 8 CATCAMS single valve springs and CATCAMS or KENT CAMS vernier cam pulleys.

    Bottom end: ACL RACE or KING RACING tri-metal big end and main bearings, standard or undersize, and ACL RACE thrust washers shared by the TU24, TU2J2 and TU3JP.

    VIBRA-TECHNICS mounts: right-hand engine mount and gearbox mounts, road or competition.

  • PEUGEOT 306 1.6 8V 89/98hp TU5JP 1993-2002
    PEUGEOT 306 1.6 8V 89/98hp TU5JP 1993-2002

    The TU5JP is the 89 or 98hp 1.6 8V of the PEUGEOT 306 (1993-2002). This page gathers its bottom end and valvetrain parts.

    Bottom end: ACL RACE thrust washer set specific to the TU5JP and TU5JP4, ACL RACE or KING RACING tri-metal main and big end bearings, standard or undersize.

    Valvetrain: CATCAMS Sport camshaft, offered in nine references, CATCAMS single valve springs in a set of 8 and CATCAMS or KENT CAMS vernier cam pulleys.

    VIBRA-TECHNICS uprated engine and gearbox mounts.

  • PEUGEOT 306 2.0 16V 135hp XU10J4R 1997-2002
    PEUGEOT 306 2.0 16V 135hp XU10J4R 1997-2002

    Page for the XU10J4R, the 135hp 2.0 16V of the PEUGEOT 306 (1997-2002).

    Bottom end: WISECO forged pistons with a 23mm gudgeon pin, 86 to 87mm bore, 8.5:1 or 11:1 compression ratio, ZRP H-beam forged connecting rods with ARP 2000 bolts, ARP con rod bolts and ACL RACE or KING RACING big end bearings.

    Cylinder head: CATCAMS Sport camshafts in two references and KOLBENSCHMIDT OEM type hydraulic cam followers. The SUPERTECH intake valves listed here are specified for the XU10J4.

    VIBRA-TECHNICS mounts and POWERFLEX torque mount bushes.

  • PEUGEOT 306 S16 ACAV 155hp XU10J4 1993-2001
    PEUGEOT 306 S16 ACAV 155hp XU10J4 1993-2001

    The 155hp XU10J4 powers the PEUGEOT 306 S16 (1993-2001). This page covers the cylinder head and the bottom end.

    Cylinder head: CATCAMS Sport camshafts in nine references, CATCAMS or KENT CAMS vernier pulleys, CATCAMS springs and retainers, CATCAMS mechanical or KOLBENSCHMIDT hydraulic cam followers, SUPERTECH Inconel exhaust valves, ATHENA or COMETIC gasket.

    Bottom end: WISECO forged pistons with 23mm pin, ZRP H-beam rods, ARP bolts, ACL RACE or KING RACING bearings.

    Also: FIC injectors on clearance, VIBRA-TECHNICS and POWERFLEX mounts.

  • PEUGEOT 306 S16 163hp XU10J4RS 1996-2001
    PEUGEOT 306 S16 163hp XU10J4RS 1996-2001

    The 163hp XU10J4RS powers the PEUGEOT 306 S16 from 1996 to 2001. This page covers the whole engine.

    Bottom end: WISECO or WOSSNER forged pistons with 22mm pin, 86 to 87mm bore, ZRP I-beam forged rods with 20 or 22mm pin, ARP 2000 or L19 bolts, ACL RACE or KING RACING bearings.

    Cylinder head: 86.5mm COMETIC MLS gasket, SUPERTECH or CATCAMS stainless steel valves, CATCAMS camshafts, springs and cam followers, CATCAMS or KENT CAMS vernier pulleys.

    NGK spark plugs, FIC injectors, VIBRA-TECHNICS and POWERFLEX mounts.

  • PEUGEOT 306 MAXI 285HP XU10J4RS-K
    PEUGEOT 306 MAXI 285HP XU10J4RS-K

    Page for the XU10J4RS-K, the 285hp Kit Car engine of the PEUGEOT 306 MAXI. The selection is short and aimed at competition.

    Bottom end: WOSSNER high compression domed forged pistons, 86 or 86.5mm bore, 18mm gudgeon pin, 12.6:1 to 13.3:1 compression ratio, and ARP con rod bolts.

    Fuel: FIC high impedance high flow injectors, from 525 to 2150cc/min, on clearance with no returns.

    Also: KOLBENSCHMIDT OEM type hydraulic cam followers, VIBRA-TECHNICS road or competition mounts, POWERFLEX torque mount bushes.

Showing 1 - 35 of 35 items
PEUGEOT 306

The 306 remains the benchmark of French motorsport on the special stages: the S16 ACAV 155bhp XU10J4, the S16 163bhp XU10J4RS and above all the 306 MAXI 285bhp XU10J4RS-K, alongside the 1.4 8V TU3JP, the 1.6 8V TU5JP and the 2.0 16V 135bhp XU10J4R. Thirty-five live references: CATCAMS camshafts, mechanical and hydraulic cam followers, CATCAMS and SUPERTECH valves, uprated valve springs, WOSSNER forged pistons for the XU10J4RS-K and WISECO for the XU10J4, ZRP forged rods, ACL big end bearings, KENT CAMS adjustable pulleys, uprated head gaskets, ARP rod bolts plus VIBRA-TECHNICS and POWERFLEX engine mounts. Pick your engine in the sub-categories.