Skip to content
  • In stock
Reinforced exhaust valves Nissan Sunny Almera Primera SR20DE Reinforced exhaust valves Nissan Sunny Almera Primera SR20DE

Reinforced exhaust valves Nissan Sunny Almera Primera SR20DE

€211.46 (tax incl.)
€264.32 (tax incl.) -20%

Set of 8 reinforced exhaust valves for the Nissan SR20DE.

  • Brands: FERREA, SUPERTECH
  • Engine: SR20DE 2.0 16V
  • Dimensions: 30.15 mm head (standard), 30.65 or 31.15 mm, 5.94 mm stem
  • Material: Super Alloy, black nitrided stainless steel or Inconel
NEVN-1006-8
3 in stock in Europe (72h lead time)
Available in stock in Europe (72h lead time)
Pay in installments

Nissan engines covered

The SR20DE is Nissan's naturally aspirated 2 litre with 16 valves and twin overhead camshafts. In the 1990s it powered the 100NX and Sunny III GTI, the Almera GTi, the Primera 2.0 and the Serena.

Its 8 original exhaust valves, part numbers 13202-53J01 then 13202-53J02, have a 30.0 to 30.3 mm head and a 5.945 to 5.960 mm stem. On the GTI versions they often run high in the rev range.

SUPERTECH and FERREA reinforced exhaust valves

The SR20DE breathes without a turbo, yet its exhaust valves already work in searing conditions. On this atmospheric engine the metal of the head climbs to 760 to 870 °C, and a turbo conversion takes it past 1,000 °C. Its cooling depends first on the seat, which drains close to 75 % of the heat each time the valve closes, with the guide taking another 20 % through the stem. EV8 steel holds 550 MPa at 600 °C and no more than 300 MPa around 800 °C: beyond that, the head loses rigidity, dishes, warps and allows compression to leak away.

Two manufacturers and three materials make up the range. SUPERTECH offers a black nitrided stainless steel valve alongside an Inconel one; this superalloy with a high nickel content retains 860 MPa at 732 °C and 554 MPa at 816 °C, roughly 85 % ahead of EV8 close to 800 °C. As for FERREA, its valve comes from the Super Alloy Competition Plus range, a nickel superalloy said to be 20 % tougher once hot, with a seat that lasts 25 % longer.

FERREA F1869P keeps the standard 30.15 mm. The others grow: 30.65 mm for NEVN-1006 (+0.5 mm), 31.15 mm for NEVI-1007 and F1870P (+1 mm). With a bigger diameter, burnt gases get a wider opening, about 10 to 12 cfm per extra millimetre: combustion residue clears out sooner, freeing space for a denser fresh charge. Each of the 8 exhaust seats is then machined to suit the size selected.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
F1869P*8 FERREA Standard 30.15 mm 5.94 mm 102.4 mm Super Alloy (nickel base)
NEVN-1006-8 SUPERTECH +0.5 mm 30.65 mm 5.94 mm 102.4 mm Black nitrided stainless steel
NEVI-1007-8 SUPERTECH +1 mm 31.15 mm 5.94 mm 102.4 mm Inconel
F1870P*8 FERREA +1 mm 31.15 mm 5.94 mm 102.4 mm Super Alloy (nickel base)

F1869P: 30.15 mm head (standard); NEVN-1006: 30.65 mm (+0.5 mm); NEVI-1007 and F1870P: 31.15 mm (+1 mm); 5.94 mm stem and 102.4 mm length for all.

Valve fitting

PartNissan originalReinforced
Collets 13210-D4200 K10036
Valve stem seals 13207-84A00 / 13207-53F00 VS-N6E-8
Valve guide 13213-53J60 GDE-NSR6-E-8

On reassembly, the 6 mm collets must lock properly into the groove of the new valves; the K10036 collets are intended for the SR20.

At 30.15 mm, recutting the seats is enough; at 30.65 or 31.15 mm, the 8 exhaust seats are machined.

Keep the same size and brand on all 8 valves and replace the exhaust valve stem seals, for example with VS-N6E-8.

Technical guide

Our brands

SUPERTECH Located in California, SUPERTECH has served motorsport for more than thirty years and machines its cylinder head components there. For the SR20DE the brand lists two exhaust valves, a black nitrided stainless steel one at +0.5 mm and an Inconel one at +1 mm, picked to suit how far the engine is tuned.
FERREA FERREA dates from 1978, when Daniel Urrutia and Horacio Ferrea set it up; its valves are produced in Florida and in Argentina. For this engine it supplies Super Alloy Competition Plus in two sizes, stock and +1 mm, suited to naturally aspirated builds as well as to boosted ones.

How to choose

On the SR20DE, settle the seat question first, kept at 30.15 mm or enlarged to 30.65 or 31.15 mm, then the material: nitrided stainless, Super Alloy or Inconel depending on the heat the head will have to withstand.

CriterionOption 1Option 2
Size Stock, 30.15 mm
The seats are only refaced and retain their diameter. A single valve covers this case: FERREA F1869P*8 in Super Alloy, the one to choose when the head must get back its original factory dimensions.
+0.5 or +1 mm
The 8 seats go under the cutter to reach the new diameter, a chance to correct along the way those that have already sunk. NEVN-1006-8 grows to 30.65 mm; NEVI-1007-8 and F1870P*8 reach 31.15 mm, for a flow gain in the region of 10 to 12 cfm per millimetre.
Material Nitrided stainless or Super Alloy
NEVN-1006-8 in black nitrided stainless steel is the cheapest valve in the range and is plenty for a naturally aspirated SR20DE, even one regularly taken high up the rev range. FERREA F1869P*8 and F1870P*8 in Super Alloy bring an additional margin of strength at temperature.
Inconel
NEVI-1007-8 is the only Inconel valve for this engine: the sensible choice once the SR20DE receives forced induction, turbo or supercharger, as the alloy keeps its strength where steel gives way. It comes in the +1 mm size only.

When reinforced valves become necessary

  • Turbo or supercharger conversion on the engine (Inconel version advised)
  • Camshafts with more lift and duration
  • Long track sessions at high revs
  • Exhaust seats already recut several times
  • Head rebuild after a burnt or bent exhaust valve

Vehicle compatibility

ModelEngine codePowerYears
100NX 2.0 GTI (B13) SR20DE 1990-1994
Sunny III 2.0 GTI 16V (N14) SR20DE 1990-1995
Almera I 2.0 GTi (N15) SR20DE 1995-2000
Primera 2.0 (P10) SR20DE 1990-1996
Primera 2.0 16V (P11) SR20DE 1996-2002
Primera Break 2.0 (W10) SR20DE 1994-1998
Serena 2.0 (C23) SR20DE 1992-2001

OEM part number (exhaust valve): 13202-53J01, 13202-53J02

Important: one set of 8 covers a complete engine. These valves are intended for the SR20DE with 6 mm stems; the SR20VE has its own page.

Don't forget the inlet valves

Is the SR20DE head coming off? Seize the opportunity to put fresh inlet valves in during that same job, along with the valve stem seals on all 16 valves of the engine.

Nissan SR20DE SR20DET inlet valves →
Valve spring kit Nissan SR20DE SR20DET →

16 other products in the same category

Viewed products

Loading...