Skip to content
  • On order
Bronze exhaust valve guides Nissan SR20DET 7 mm Bronze exhaust valve guides Nissan SR20DET 7 mm

SUPERTECH bronze exhaust valve guides 7 mm stem Nissan SR20DET

€80.28 (tax incl.)
€100.36 (tax incl.) -20%

Set of 8 exhaust valve guides for the Nissan SR20DET, 7 mm stem.

  • Brand: SUPERTECH
  • Engine: SR20DET
  • Material: manganese bronze
  • Sizes: standard or 0.0254 mm oversize
GDE-NSR7-ET-8
On order, 15 to 30 days lead time
Pay in installments

The Nissan SR20DET engine concerned

The SR20DET of the Sunny GTI-R (N14) is a 2.0 litre turbo four-cylinder with 16 valves and twin overhead camshafts. For it SUPERTECH describes an exhaust guide with a 7 mm bore, paired with the brand's VS-N7E stem seal. Each head calls for eight.

The standard outside diameter is 11.03 mm for a length of 43 mm. A version oversize by 0.001 inch also exists: the set of 8 guides is ordered in either size.

SUPERTECH manganese bronze exhaust valve guides

A turbo sends scorching gas onto the exhaust valve, and the stem only cools through contact with the guide, which passes the heat back into the head. As wear sets in, play grows, the valve meets its seat off-square and a film of oil runs toward the manifold: blue smoke, oil consumption, a turbo that gets fouled.

This SUPERTECH guide is made of manganese bronze, a material whose thermal conduction, the brand states, is clearly higher than that of the sintered factory guides. It goes with exhaust valves whose stem measures 7 mm and with the VS-N7E seal, which are ordered separately. The set holds the 8 exhaust guides of one head, in standard or oversize depending on the option chosen.

Valve guide technical specifications

Part numberBrandMaterialSizeStem ØOutside ØLength
GDE-NSR7-ET-8 SUPERTECH Manganese bronze Standard 7.0 mm 11.03 mm 43 mm
GDE-NSR7-ET-OS-8 SUPERTECH Manganese bronze +0.0254 mm 7.0 mm

Valve guide installation

ComponentOriginalReinforced
Exhaust valve guide - Replaced by the kit
Inlet valve guide - SR20DE SR20DET inlet guide set
Inlet stem seal - VS-N6I-12
Exhaust stem seal - VS-N7E-8
Exhaust valves - Exhaust

Technical guide

For the GTI-R exhaust side, a reinforced valve is offered:

Nissan Pulsar GTI-R SR20DET reinforced exhaust valves →

Our brand

SUPERTECH Based in San Jose, California, SUPERTECH equips motorsport with valve train parts: valves, guides, retainers and springs. According to the brand, each part is examined by ultrasound, X-ray and laser before it goes to the builders of racing engines.

Standard or oversize?

The standard version measures 11.03 mm outside diameter. The oversize version, marked " .001 oversize " by SUPERTECH, adds 0.001 inch, or 0.0254 mm, for a slightly wider head bore; the brand does not publish its exact diameter.

Manganese bronze

Copper, zinc, manganese, iron and aluminium make up this hard alloy, which is little affected by friction wear and by corrosion. Makers of heavily loaded bushings and guiding parts often choose it, which explains why it appears in valve guides.

When valve guides must be replaced

  • Blue smoke on lift-off, oil disappearing
  • Reinforced exhaust valves with a 7 mm stem in a worn head
  • Sunny GTI-R pushed hard on track or rally
  • Complete head overhaul

Vehicle compatibility

ModelEngine codePowerYears
Nissan 180SX (S13) SR20DET 200-208 hp 1991-1997
Nissan 200SX (S14, S15) SR20DET 200-220 hp 1993-2002
Nissan Altra, R'nessa (N30) SR20DET 200 hp 1997-2001
Nissan Avenir (W11) SR20DET 200 hp 1998-2005
Nissan Bluebird (U13, U14) SR20DET 210 hp 1991-1996
Nissan Lucino (N14) SR20DET 220 hp 1991-1995
Nissan Prairie Liberty (M12) SR20DET 230 hp 1998-2001
Nissan Silvia (S13) SR20DET 205-223 hp 1991-1993
Nissan Silvia (S15) SR20DET 200-250 hp 1999-2003
Nissan Sunny GTI-R (N14) SR20DET 220-230 hp 1990-1995

Important: this set targets only the SR20DET of the Sunny GTI-R, not the other versions of this engine or the naturally aspirated SR20DE.

Remember the valve stem seals

These guides go with new stem seals. For the SR20DET inlet side we offer the SUPERTECH 6 mm seals, in sets of 12:

SUPERTECH 6 mm inlet stem seals, set of 12 →

16 other products in the same category

Viewed products

Loading...