Skip to content
  • In stock
Exhaust valve stem seals Nissan SR20 CA18 Exhaust valve stem seals Nissan SR20 CA18

SUPERTECH exhaust valve stem seals Nissan SR20 CA18

€10.13 (tax incl.)
€12.66 (tax incl.) -20%

Set of 8 exhaust valve stem seals for Nissan SR20 and CA18 four-cylinders, 6 mm stem.

  • Brand: SUPERTECH
  • Engines: CA18DE, CA18DET, SR20DE, SR20DEH, SR20DEL, SR20DNE
  • Material: Viton (FKM)
VS-N6E-8
23 in stock in Europe (72h lead time)
Available in stock in Europe (72h lead time)
Pay in installments

Nissan engines concerned

These seals equip the 6 mm stem exhaust valves of Nissan 16-valve four-cylinders CA18DE and CA18DET (Sunny, Bluebird, 200SX, 180SX) and SR20DE, SR20DEH, SR20DEL and SR20DNE (Primera, Almera, Sunny, Bluebird, Avenir, Silvia, 200SX, Infiniti G20).

The exhaust side of the head has 8 valves, two per cylinder. Placed on the guide, the original seal contains oil while greasing the stem; Nissan lists it as 13207-84A00 (NDK) or 13207-D4201 (NOK), then 13207-53F00 (NOK) from 1996 on the SR20DE.

SUPERTECH exhaust valve stem seals

On the exhaust side this seal lives where it is hottest: the valve it surrounds clears the burnt gases. Hardened or cracked by temperature, it no longer stops oil, which reaches the chamber and burns: consumption, blue smoke, deposits building up on the valves and manifold. An oil film must still remain, otherwise the stem wears in its guide.

SUPERTECH fits Viton (FKM) here, a heat-proof compound picked for how well it resists beside the exhaust valves; SUPERTECH says it is designed for high temperatures and guarantees it at 204 °C (400 °F) continuous. This seal takes a 6 mm stem on a 10 mm outside diameter guide. These 8 pieces complete the exhaust of a four-cylinder head; the polyacrylate (ACM) intake is bought separately.

Stem seal technical specifications

Part numberBrandPositionMaterialStem ØGuide ØSeal outside Ø
VS-N6E-8 SUPERTECH Exhaust Viton (FKM) 6 mm 10 mm 12.6 mm

Stem seal installation

PartOriginalReinforced
Exhaust stem seal Nissan 13207-84A00 / 13207-D4201 Replaced by this set
Inlet stem seal Nissan 13207-84A00 / 13207-D4201 VS-N6I-8
Valve guides (SR20, CA18) Inside Ø 6.0 mm GDE-NSR6-E-8

Technical guide

The brand offered

SUPERTECH Californian firm SUPERTECH has been drawing racing valvetrain parts in San Jose for more than 30 years, from the valves themselves down to the stem seals. Every new part starts with a finite element calculation before experienced tuners try it on track.

Why two different materials?

Dimensions do not change from one side to the other, temperature does: the exhaust gets far hotter than the intake. SUPERTECH therefore installs the more resistant VS-N6E Viton (FKM) there and keeps VS-N6I polyacrylate (ACM) on the intake. These Nissan heads take 8 of each.

When valve stem seals must be replaced

  • Oil consumption and blue exhaust smoke
  • Valves out, head reworked
  • Valve guides replaced
  • Uprated springs or valves fitted

Vehicle compatibility

Nissan

ModelEngine codePowerYears
100NX (B13) SR20DE 143-150 hp 1990-1994
180SX (S13) CA18DE / CA18DET / SR20DE 132-208 hp 1988-1997
200SX (S13) CA18DE / CA18DET / SR20DE 135-169 hp 1988-1994
200SX (S14, S15) SR20DE 141-220 hp 1993-2002
Almera (N15, N16) SR20DE 125-145 hp 1995-2002
Almera Tino (V10) SR20DE 136 hp 2000-2003
Avenir (W10, W11) SR20DE 140-200 hp 1990-2006
Bluebird (T12, U13, U14) CA18DE / SR20DE 129-210 hp 1989-2002
Bluebird Sylphy (G10) SR20DE 145 hp 2000-2006
Lucino (N14, N15, B14) SR20DE 143-220 hp 1991-2000
Primera (P10, P11, P12, W10, WP11, WP12) SR20DE / SR20DEH / SR20DEL 115-204 hp 1990-2005
Pulsar NX CA18DE 133 hp 1987-1989
R'nessa / Altra (N30) SR20DE 140-200 hp 1997-2001
Sentra (B13, B15, N14) SR20DE / SR20DNE 143-150 hp 1992-2006
Serena (C23, C24) SR20DE 126-145 hp 1992-2005
Silvia (S13, S15) SR20DE 140-250 hp 1991-2003
Sunny (B12, N13, N14, N16) CA18DE / SR20DE 125-230 hp 1987-2002

Infiniti

ModelEngine codePowerYears
G20 SR20DE 115-147 hp 1990-2002

OEM part number (Nissan SR20 and CA18 stem seals): 13207-84A00 (NDK) or 13207-D4201 (NOK); 13207-53F00 (NOK) from 1996 on the SR20DE; SR20DEL and SR20DEH: 13207-89J00, superseded by 13207-84A00.

Important: this set of 8 suits neither the SR20DET nor the SR20VE, whose exhaust requires another seal, nor the RB, VG30, VQ37VHR and VR38DETT six-cylinders (12 valves per side).

Remember the inlet valve stem seals

The intake seals age in the same head: use the teardown to change them too. SUPERTECH supplies them for the SR20 and CA18:

Nissan SR20 CA18 intake valve stem seals →

16 other products in the same category

Viewed products

Loading...