- On order
SUPERTECH bronze inlet valve guides Nissan SR20DE SR20DET
Kit of 8 inlet valve guides for the Nissan SR20DE and SR20DET, 6 mm stem.
- Brand: SUPERTECH
- Engines: SR20DE, SR20DET
- Material: manganese bronze
- Sizes: standard (OD 10.03 mm) or +0.0254 mm
Nissan engines concerned
This kit fits the inlet side of the Nissan SR20, the 2.0 litre, 16-valve, twin-cam four-cylinder: the naturally aspirated SR20DE of the Primera, Sunny, Almera, Silvia or 200SX, and the turbocharged SR20DET of the 200SX, Silvia, 180SX and Sunny GTI-R.
The cylinder head holds 8 inlet valves, each in a pressed-in guide (Nissan part number 13212-53J60, shared by the SR20DE and SR20DET). Nissan specifies a finished bore of 6.000 to 6.018 mm and a standard outside diameter of 10.023 to 10.034 mm, with a repair size of 10.223 to 10.234 mm.
SUPERTECH manganese bronze inlet valve guides
Pressed into the cylinder head, the inlet guide keeps the valve facing its seat, lets a fraction of the heat stored in the stem pass into the aluminium and bears the stem seal. With wear, the valve starts to rock: it seats poorly, oil gets past the stem, and blue smoke on start-up, oil consumption and loss of compression follow.
These guides come out of SUPERTECH's precision machining in manganese bronze; according to the brand, this copper alloy lets heat escape much more easily than series sintered guides. The kit brings together the 8 inlet guides needed for a cylinder head; they are usually installed alongside reinforced valves.
Valve guide technical specifications
| Part number | Brand | Material | Size | Stem Ø OEM 6.0 mm | Outside Ø OEM 10.0 mm, repair 10.2 mm | Length |
|---|---|---|---|---|---|---|
| GDE-NSR6-I-8 | SUPERTECH | Manganese bronze | Standard | 6.0 mm | 10.03 mm | 40 mm |
| GDE-NSR6-I-OS-8 | SUPERTECH | Manganese bronze | +0.0254 mm | 6.0 mm |
Valve guide installation
| Component | Original | Reinforced |
|---|---|---|
| Inlet valve guide | 13212-53J60 | Replaced by the kit |
| Exhaust valve guide | 13213-53J60 | SR20DE exhaust guide kit |
| Inlet stem seal | 6 mm stem | VS-N6I-12 |
| Exhaust stem seal | 6 mm stem | VS-N6E-12 |
| Valves | 6 mm stem | Inlet / Exhaust |
Technical guide
On the valve side, these engines can take SUPERTECH reinforced valves with a 6 mm stem:
| Nissan SR20DE SR20DET inlet valves → |
| Nissan SR20DE exhaust valves → |
Our brand
| From San Jose, SUPERTECH has supplied racing valvetrain parts for more than thirty years, designed with finite element analysis and then checked by ultrasound, radiography and laser before delivery. |
Standard or oversize?
SUPERTECH offers this guide in two sizes: standard, with a 10.03 mm outside diameter, and 0.001" (0.0254 mm) oversize on that diameter.
Manganese bronze
Here copper and zinc are alloyed with a little manganese, aluminium and iron. The result is a material of high mechanical strength that wears slowly under friction and shrugs off corrosion, hence its use for bushes and guiding parts working under heavy loads.
When valve guides must be replaced
- Oil burnt after passing down the inlet stems
- Reinforced valves for a high-mileage cylinder head
- Cylinder head preparation for track, drift or rally
- Complete valvetrain overhaul
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| Infiniti G20 (P10, P11) | SR20DE | 115-147 hp | 1990-2002 |
| Nissan 100NX (B13) | SR20DE | 143-150 hp | 1990-1994 |
| Nissan 180SX (S13) | SR20DE | 162 hp | 1991-1994 |
| Nissan 200SX (S13) | SR20DE | 140 hp | 1988-1993 |
| Nissan 200SX (S14) | SR20DE | 141-162 hp | 1993-1999 |
| Nissan Almera (N15) | SR20DE | 125-143 hp | 1995-2000 |
| Nissan Almera (N16) | SR20DE | 145 hp | 2002- |
| Nissan Almera Tino (V10) | SR20DE | 136 hp | 2000-2003 |
| Nissan Altra, R'nessa (N30) | SR20DE | 140 hp | 1997-2001 |
| Nissan Avenir (W10, W11) | SR20DE | 140-145 hp | 1990-2006 |
| Nissan Bluebird (U13, U14) | SR20DE | 145 hp | 1991-2002 |
| Nissan Bluebird Sylphy (G10) | SR20DE | 145 hp | 2000-2006 |
| Nissan Expert (W10) | SR20DE | 126 hp | 1995-2000 |
| Nissan Lucino (N14, N15, B14) | SR20DE | 143 hp | 1991-2000 |
| Nissan Pick Up (D22) | SR20DE | 125 hp | 1997-2001 |
| Nissan Prairie (M11, M12) | SR20DE | 140-145 hp | 1995-2001 |
| Nissan Presea (R11) | SR20DE | 145 hp | 1997-2000 |
| Nissan Primera (P10, W10) | SR20DE | 125-152 hp | 1990-1998 |
| Nissan Primera (P11, WP11) | SR20DE | 115-145 hp | 1996-2002 |
| Nissan Sabre (N14) | SR20DE | 140 hp | 1994-2001 |
| Nissan Sentra (B13) | SR20DE | 143 hp | 1992-1994 |
| Nissan Sentra (B15) | SR20DE | 145-150 hp | 2000-2006 |
| Nissan Serena (C23, C24) | SR20DE | 126-145 hp | 1992-2005 |
| Nissan Silvia (S13) | SR20DE | 140 hp | 1991-1993 |
| Nissan Silvia (S15) | SR20DE | 160-165 hp | 1999-2002 |
| Nissan Sunny (N14, B13) | SR20DE | 141-143 hp | 1990-1997 |
| Nissan Sunny (N16) | SR20DE | 125-150 hp | 1997-2002 |
| Nissan Tsuru | SR20DE | 141 hp | 1991-2007 |
| Nissan 180SX (S13) | SR20DET | 200-208 hp | 1991-1997 |
| Nissan 200SX (S14, S15) | SR20DET | 200-220 hp | 1993-2002 |
| Nissan Altra, R'nessa (N30) | SR20DET | 200 hp | 1997-2001 |
| Nissan Avenir (W11) | SR20DET | 200 hp | 1998-2005 |
| Nissan Bluebird (U13, U14) | SR20DET | 210 hp | 1991-1996 |
| Nissan Lucino (N14) | SR20DET | 220 hp | 1991-1995 |
| Nissan Prairie Liberty (M12) | SR20DET | 230 hp | 1998-2001 |
| Nissan Silvia (S13) | SR20DET | 205-223 hp | 1991-1993 |
| Nissan Silvia (S15) | SR20DET | 200-250 hp | 1999-2003 |
| Nissan Sunny GTI-R (N14) | SR20DET | 220-230 hp | 1990-1995 |
OEM part number (valve guide): 13212-53J60
Remember the exhaust guides and valve stem seals
New guides always need fresh stem seals as well. For the SR20 engines we also offer:
| Nissan SR20DE exhaust valve guides → |
| SUPERTECH 6 mm inlet stem seals, set of 12 → |
| SUPERTECH 6 mm exhaust stem seals, set of 12 → |
-
Brand
-
ReferenceGDE-NSR6-I-8