- In stock
ACL trimetal connecting rod bearings 48 mm Nissan SR20DET GTi-R
Set of 8 trimetal connecting rod half-bearings for Nissan SR20DET GTi-R (Ø 48 mm).
- Brand and treatment: ACL Race; Calico CT-1 (HC)
- Compatibility: Sunny GTI-R (N14)
- Engine codes: SR20DET
- Available sizes: standard to +0.25 mm, increased-clearance version (HX)
The Nissan SR20DET GTi-R four-cylinder engine
The SR20DET is Nissan's 2.0 litre 16-valve turbocharged four-cylinder engine. This page covers its GTi-R version, fitted to the Sunny GTI-R (N14), whose connecting rod bearings are 19.1 mm wide. ACL lists a single bearing set for this engine.
From the factory, this engine is fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.
From the factory, Nissan fits these engines with connecting rod bearings under part number 12111-60J00, and its workshop manual specifies a running clearance of 0.020 to 0.045 mm.
Trimetal connecting rod bearings
In a trimetal bearing, a steel back carries a copper-lead intermediate layer with high load capacity, itself covered by an anti-friction running layer that spares the crankpin. The set is supplied complete: 8 half shells, i.e. 4 pairs.
Trimetal targets high, sustained loads, whereas aluminium bi-metal is limited to low to medium loads: about 8,000 psi for the latter, up to 12,000 psi for a performance trimetal, 50% more. The benefit shows in strength and durability on turbo, supercharged and high-revving engines.
Technical specifications
| ACL bearings Crankpin Ø 47.956 / 47.974 mm Housing bore Ø 51.000 / 51.013 mm Width 19.1 mm |
| Reference | Brand and treatment | Size | Wall thickness (mm) |
|---|---|---|---|
| 4B2976H-STD | ACL Race - Untreated | Standard | 1.503 |
| 4B2976HC-STD | ACL Race - Calico CT-1 | Standard | |
| 4B2976HX-STD | ACL Race - Untreated | Std, increased clearance (HX) | 1.490 |
| 4B2976H-.025 | ACL Race - Untreated | +0.025 | 1.516 |
| 4B2976H-.25 | ACL Race - Untreated | +0.25 | 1.628 |
| 4B2976HC-.25 | ACL Race - Calico CT-1 | +0.25 |
Running clearance
Running clearance is the gap between the bearing and the crankpin, filled by the oil film.
While the engine turns, the crankpin floats on this oil film, which carries the load without direct contact with the bearing. Film thickness depends on clearance: too tight, oil passes poorly, temperature rises and the risk of seizure grows; too wide, oil escapes, the film carries less and oil pressure decreases. A correct clearance ensures both sufficient lubrication and a well-maintained film.
| Size / grade | When to choose it | ACL Race Series |
|---|---|---|
| Standard (STD) | Standard journal, not reground | 0.051 to 0.061 mm |
| Increased clearance (HX) | Wider clearance: high oil flow, high rpm | 0.077 to 0.086 mm |
| +0.025 mm | Polished journal | 0.051 to 0.061 mm |
| +0.25 mm | Journal reground to 0.25 mm | 0.051 to 0.061 mm |
Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Technical guide
These ACL trimetal connecting rod bearings are aimed at built engines and racing: where a standard bearing quickly reaches its limit, they accept more power, more rpm and more boost. The range includes the standard size, a +0.025 mm size for a crankpin that has only been polished, a +0.25 mm regrind size and the HX version with increased clearance for high-revving engines or engines needing a high oil flow. It allows the same part number to be kept after the crankshaft is reground and the clearance to be tailored to the oil used and the engine's duty.
The brand
![]() |
ACL Bearing Company, an Australian manufacturer of high-performance engine bearings since 1949, offers with its Race Series precise trimetal bearings, available in many sizes and proven on built engines worldwide. Its Calico version (HC suffix) adds the CT-1 coating, a dry film lubricant that reduces friction and abrasive wear. |
Vehicle compatibility
This connecting rod bearing set fits the SR20DET GTi-R four-cylinder engine of the following Nissan models:
| Brand | Model (chassis) | Engine code | Power | Years |
|---|---|---|---|---|
| NISSAN | SUNNY III Hatchback (N14) 2.0 GTI-R 4x4 | SR20DET | 220–230 hp | 1990–1995 |
Why replace the bearings
Replacing the bearings during a build or rebuild guards against the most expensive failure: a worn-out connecting rod bearing scores the crankpin, contaminates the oil circuit with debris and forces at least a crankshaft regrind, or even a new rod and block. Against such costs a new set weighs little: it is the cheapest part of the rotating assembly, but the one whose failure costs the most.
-
Brand
-
Reference4B2976H-STD
