Skip to content
  • On order
Forged connecting rods Nissan RB30 3.0 12v (Skyline R31) for forged pistons Forged connecting rods Nissan RB30 3.0 12v (Skyline R31) for forged pistons Forged connecting rods Nissan RB30 3.0 12v (Skyline R31) for forged pistons Forged connecting rods Nissan RB30 3.0 12v (Skyline R31) for forged pistons Forged connecting rods Nissan RB30 3.0 12v (Skyline R31) for forged pistons Forged connecting rods Nissan RB30 3.0 12v (Skyline R31) for forged pistons

Forged connecting rods Nissan - 3.0L 12V - RB30 (Skyline R31) for forged pistons

€859.67 (tax incl.)
€1,074.59 (tax incl.) -20%

Set of 6 forged 4340-steel connecting rods for Nissan RB30 3.0 12v (Skyline R31, Holden VL).

  • Brands: Manley
  • Compatibility: RB30E / RB30ET
  • Engine codes: RB30
  • Bolts included: ARP 8740 or ARP 2000 (7/16")
14018-6
On order, 15 to 30 days lead time
Pay in installments

The Nissan RB30 engine

The RB30 is the 3.0 L single-cam, 12-valve inline-six of Nissan's RB family. Offered as the naturally aspirated RB30E (about 155 to 159 hp) and the turbo RB30ET (up to 204 hp), it powered the Nissan Skyline R31, the Nissan Patrol and the Holden VL Commodore, built under licence in Australia. Its tall block and long-stroke crankshaft (85 mm) make it the sought-after base for stroker builds and the famous RB30/26 conversions, which mate the RB30 bottom end to a 24-valve turbo head. As soon as boost pressure rises, the factory rods become the weak link: replacing them with forged rods is the first safeguard of a lasting build.

The forged connecting rods

Drop-forged from 4340 chrome-molybdenum steel, these Manley rods withstand bending and fatigue loads well beyond the factory sintered rods. They suit the open road as much as motorsport: circuit, time attack, drift, drag, rally and hillclimb. Depending on the chosen profile, they support builds from Stage 2 to Stage 4 and beyond, on an RB30 or a hard-boosted RB30/26 conversion. Supplied as a complete set of 6, they are weight-matched to preserve the balance of the rotating assembly and reliability at high rpm.

Technical specifications of the RB30 forged rods

ReferenceBrandProfileBoltsPin Ø (mm)Small end width (mm)Big end Ø (mm)Big end width (mm)Center-to-center (mm)Weight (g)
14018-6 Manley H ARP 8740-7/16"-37mm 21 53 21,7 152,27 610
14428-6 Manley I-HD ARP 2000-7/16"-37mm 21 53 21,7 152,27 630
14018R-6 Manley H ARP 2000-7/16"-37mm 21 53 21,7 152,27 610

Tightening torque and stretch

On these rods, tightening is controlled by bolt stretch, measured with a gauge, rather than by torque. The values below are indicative: always follow the bolt manufacturer's instructions.

RodBoltsTightening torque (N·m)Recommended stretch (mm)
Manley H (14018-6) ARP 8740 128,8 0,127 – 0,137
Manley I-HD (14428-6) ARP 2000 108,5 0,127 – 0,152
Manley H (14018R-6) ARP 2000 122 0,127 – 0,152

Technical guide

4340 forged steel: what is it?

4340 is a low-alloy nickel-chromium-molybdenum steel that has become the benchmark material for high-performance connecting rods. Shaped by forging, then quenched and tempered, it keeps a continuous grain flow that gives it high tensile strength and, above all, excellent fatigue life. Compared with a mass-produced sintered rod optimised for cost, a forged 4340 rod gains about +19% yield strength, +8% tensile strength and +19 to +37% in fatigue, a decisive margin against the overpressure and rpm surges of a tuned engine.

Rod profiles

This reference comes in two Manley profiles: the H, built for resistance to high torque, and the reinforced I (I-HD), lighter at equal stiffness. The choice depends on the power target and the type of use; the specification table gives the center-to-center length, big-end diameter and weight of each reference.

I profile (I-HD): I-HD profile (Pro Series I-Beam Turbo Tuff). A “Heavy Duty” variant of the I profile, it retains the same architecture while giving it a reinforced, thicker beam, sized to absorb considerably higher stresses. It targets extreme loads, on turbo, supercharged or nitrous builds with high power and high boost pressure.
H profile: H profile. Two wide flat flanks joined by a central web make up its “H” section and give the rod a massive, even outline from end to end. On tuned naturally aspirated engines that rev high, it is the profile of choice, as it brings great robustness to the bottom end.

How to choose your rod bolts? ARP

ARP This reference uses large-diameter 7/16" ARP bolts, sized for the high loads of a boosted RB30. Two grades are offered. ARP 8740: the proven, versatile heat-treated chrome-molybdenum steel, ARP's long-standing reference fitted to most performance kits. ARP 2000: a higher-grade alloy offering a tensile strength of about 220,000 psi (1,517 MPa) and an increased safety margin for the most demanding builds. Whatever the grade, tightening is set by bolt stretch (see below), not by torque alone.

Measuring bolt stretch

Measuring bolt stretch

On a forged rod, the correct bolt preload is verified by its stretch, measured with a dial gauge, rather than by torque alone: lubrication and run-in distort the torque reading. Always refer to the stretch values specified by the bolt manufacturer.

Discover the ARP stretch gauge

Available brands

Manley This reference is fitted exclusively with Manley Performance rods (USA), a renowned American maker of forged competition connecting rods. Manley offers here the H and I-HD profiles, weight-matched, with ARP 8740 or ARP 2000 bolts.

Glossary

1) Small end
2) Small-end diameter
3) Rod beam
4) Rod bolt
5) Big end
6) Rod nut / bolt
7) Rod cap
8) Big-end diameter
9) Center-to-center

Vehicle compatibility of the Nissan RB30 engine

Rods compatible with the following Nissan RB30 engines (21 mm piston pin) and the licence-built Holden VL:

BrandModel (chassis)Engine codePowerYears
Nissan Skyline (R31) RB30E 117 kW (159 ch) 1986 – 1990
Nissan Patrol GR (Y60) RB30S 100 kW (136 ch) 1990 – 1997
Holden Commodore (VL) RB30E 114 kW (155 ch) 1986 – 1988
Holden Commodore (VL) Turbo RB30ET 150 kW (204 ch) 1986 – 1988
Holden Calais (VL) RB30E / RB30ET 114 – 150 kW (155 – 204 ch) 1986 – 1988
Holden Berlina (VL) RB30E / RB30ET 114 – 150 kW (155 – 204 ch) 1986 – 1988

OEM reference: 1210061S00 (set of 6 rods).

Why it is the most economical solution

A set of forged rods costs far less than an engine failure: on a boosted RB30, an original rod that lets go takes out the block, the crankshaft and often the head. By fitting weight-matched forged rods from the start, you make your build reliable for the long term and avoid a full rebuild, for a negligible extra cost compared with the price of a new engine.

3 other products in the same category

Viewed products

Loading...