Skip to content
  • In stock
ACL trimetal connecting rod bearings Nissan RB30 VG30 VG33E VE30DE ACL trimetal connecting rod bearings Nissan RB30 VG30 VG33E VE30DE

ACL trimetal connecting rod bearings Nissan RB30 VG30 VG33E VE30DE

€74.95 (tax incl.)
€83.28 (tax incl.) -10%

Set of 12 trimetal connecting rod half-bearings for Nissan RB30, VG30, VG33E and VE30DE.

  • Brand and treatment: ACL Race, untreated or Calico
  • Compatibility: 300ZX, Maxima, Skyline R31, Patrol, Pathfinder
  • Engine codes: RB30E, RB30S, VG30E, VG30ET, VG30DE, VG30DETT, VG33E
  • Available sizes: standard to +0.50 mm, increased clearance version (HX)
6B2390H-STD
1 in stock in France
13 in stock in Europe (72h lead time)
Available in stock in France
Pay in installments

The Nissan RB30, VG30, VG33 and VE30DE engines

The RB30 is Nissan's 3-litre inline six with a single overhead camshaft and 12 valves (RB30E, RB30S, RB30ET turbo). The VG30 engines are 3-litre V6 units, with a single overhead camshaft per bank on the VG30E, VG30ET and VG30i and double overhead camshafts and 24 valves on the VG30DE, VG30DET and VG30DETT; the VG33E is the 3.3-litre version and the VE30DE a 3-litre double overhead camshaft V6. ACL lists the same bearing set for all these engines: a single set covers the family.

From the factory, this engine is fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.

Trimetal connecting rod bearings

In a trimetal bearing, a steel back carries a copper-lead intermediate layer with high load capacity, itself covered by an anti-friction running layer that spares the crankpin. The set is supplied complete: 12 half shells, i.e. 6 pairs.

Trimetal targets high, sustained loads, whereas aluminium bi-metal is limited to low to medium loads: about 8,000 psi for the latter, up to 12,000 psi for a performance trimetal, 50% more. The benefit shows in strength and durability on turbo, supercharged and high-revving engines.

Technical specifications

Fitment dimensions common to all references
ACL bearings
Crankpin Ø 49.961 / 49.974 mm
Housing bore Ø 53.000 / 53.011 mm
Width 17.1 mm
ReferenceBrand and treatmentSizeWall thickness (mm)
6B2390H-STD ACL Race - Untreated Standard 1.503
6B2390HX-STD ACL Race - Untreated Std, increased clearance (HX) 1.490
6B2390H-.025 ACL Race - Untreated +0.025 1.516
6B2390H-.25 ACL Race - Untreated +0.25 1.628
6B2390H-.50 ACL Race - Untreated +0.50 1.753
6B2390HC-STD ACL Race - Calico CT-1 Standard
6B2390HXC-STD ACL Race - Calico CT-1 Std, increased clearance (HX)
6B2390HC-.025 ACL Race - Calico CT-1 +0.025
6B2390HC-.25 ACL Race - Calico CT-1 +0.25

Running clearance

Running clearance is the gap between the bearing and the crankpin, filled by the oil film.

While the engine turns, the crankpin floats on this oil film, which carries the load without direct contact with the bearing. Film thickness depends on clearance: too tight, oil passes poorly, temperature rises and the risk of seizure grows; too wide, oil escapes, the film carries less and oil pressure decreases. A correct clearance ensures both sufficient lubrication and a well-maintained film.

Size / gradeWhen to choose itACL Race Series
Standard (STD) Standard journal, not reground 0.053 to 0.063 mm
Increased clearance (HX) Wider clearance: high oil flow, high rpm 0.078 to 0.088 mm
+0.025 mm Polished journal 0.053 to 0.063 mm
+0.25 mm Journal reground to 0.25 mm 0.053 to 0.063 mm
+0.50 mm Journal reground to 0.50 mm 0.053 to 0.063 mm

Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Plastigauge

Order the Plastigauge →

Technical guide

These ACL trimetal connecting rod bearings are aimed at built engines and racing: where a standard bearing quickly reaches its limit, they accept more power, more rpm and more boost. The range includes the standard size, a +0.025 mm size for a crankpin that has only been polished, +0.25 and +0.50 mm regrind sizes and the HX version with increased clearance for high-revving engines or engines needing a high oil flow. It allows the same part number to be kept after the crankshaft is reground and the clearance to be tailored to the oil used and the engine's duty.

The brand

ACL Bearing Company ACL Bearing Company, an Australian manufacturer of high-performance engine bearings since 1949, offers with its Race Series precise trimetal bearings, available in many sizes and proven on built engines worldwide. Its Calico version (HC suffix) adds the CT-1 coating, a dry film lubricant that reduces friction and abrasive wear.

Vehicle compatibility

This connecting rod bearing set fits the RB30, VG30, VG33E and VE30DE engines of the following Nissan models:

BrandModel (chassis)Engine codePowerYears
NISSAN 300ZX (Z31) VG30E, VG30ET 170–203 hp 1984–1990
NISSAN 300ZX (Z32) VG30DE, VG30DET, VG30DETT 226–305 hp 1989–1997
NISSAN 300ZX Coupé (Z31) VG30E 170 hp 1984–1987
NISSAN 300ZX Convertible (Z32) VG30DE 226 hp 1992–1996
NISSAN BLUEBIRD (U13, U14) VG30E 160 hp 1991–1997
NISSAN CEDRIC (Y30) VG30E 150–179 hp 1983–1988
NISSAN CEDRIC (Y32) VG30DE, VG30E 160–193 hp 1991–1995
NISSAN CEDRIC Hardtop (Y31) VG30E 160 hp 1987–1991
NISSAN CEDRIC WAGON (Y30) VG30E 160–180 hp 1983–1997
NISSAN CIMA (Y31) VG30DE, VG30DET 203–258 hp 1988–1991
NISSAN CIMA (Y32) VG30DET 256 hp 1991–1996
NISSAN ELGRAND (E50) VG33E 170 hp 1996–2002
NISSAN GLORIA (Y32) VG30DE, VG30DET, VG30E 160–254 hp 1991–1997
NISSAN GLORIA Estate (Y30, Y31, Y32) VG30E 160–179 hp 1984–1997
NISSAN GLORIA VII (Y30) VG30E 148–179 hp 1983–1987
NISSAN GLORIA VIII (Y31) VG30DE, VG30DET, VG30E 160–254 hp 1987–1995
NISSAN HOMY Van (E24) VG30E 160 hp 1994–1997
NISSAN LEOPARD (Y32) VG30E 200 hp 1991–1995
NISSAN LEOPARD (Y33) VG30E 160 hp 1995–2001
NISSAN LEOPARD II Coupé (F31) VG30DET 185–254 hp 1986–1991
NISSAN MAXIMA / MAXIMA QX IV (A32) VG30DE 193 hp 1994–1999
NISSAN MAXIMA / MAXIMA QX V (A33) VG30DE 226 hp 1999–2001
NISSAN MAXIMA II (PU11) VG30E 154–159 hp 1984–1988
NISSAN MAXIMA II Estate (PU11) VG30E 159 hp 1984–1988
NISSAN MAXIMA III (J30) VE30DE, VG30E 162–193 hp 1988–1994
NISSAN NAVARA (D21) VG30E 140–155 hp 1986–1997
NISSAN NAVARA (D22) VG30E, VG33E 163–170 hp since 1997
NISSAN NAVARA Platform/Chassis (D21) VG30E 140–154 hp 1985–1997
NISSAN NAVARA Platform/Chassis (D22) VG30E 163 hp 2000–2004
NISSAN PATHFINDER I (WD21) VG30E, VG30i 129–155 hp 1986–1995
NISSAN PATHFINDER II (R50) VG33E 150–170 hp 1997–2004
NISSAN PATROL GR IV (Y60, GR) RB30S 136 hp 1990–1997
NISSAN PATROL III/2 Hardtop (K260) RB30S 135–148 hp 1989–1993
NISSAN PATROL III/2 Station Wagon (W260) RB30S 135–148 hp 1989–1993
NISSAN PICK UP (D21) VG30E 152–170 hp 1985–1997
NISSAN PICK UP (D22) VG30E, VG33E 163–170 hp 1997–2007
NISSAN QUEST (V40) VG30E 154 hp 1992–1998
NISSAN QUEST Mini Passenger Van VG33E 173 hp 1998–2002
NISSAN SANI II (WD21) VG30E 163 hp 1990–1999
NISSAN SILVIA (S12) VG30E 162 hp 1986–1988
NISSAN SKYLINE (R31) RB30E 159 hp 1986–1990
NISSAN SKYLINE Estate (R31) RB30E 159 hp 1986–1990
NISSAN TERRANO I (WD21) VG30E, VG30i 129–148 hp 1986–1995
NISSAN TERRANO II (R20) VG33E 170 hp 1992–2004
NISSAN URVAN Bus (E24) VG30E 163 hp 1995–2000
NISSAN XTERRA (WD22_) VG33E 170–182 hp 1999–2004

Why replace the bearings

Replacing the bearings during a build or rebuild guards against the most expensive failure: a worn-out connecting rod bearing scores the crankpin, contaminates the oil circuit with debris and forces at least a crankshaft regrind, or even a new rod and block. Against such costs a new set weighs little: it is the cheapest part of the rotating assembly, but the one whose failure costs the most.

3 other products in the same category

Viewed products

Loading...