Skip to content
  • On order
Exhaust valve stem seals Nissan SR20DET KA24DE Exhaust valve stem seals Nissan SR20DET KA24DE

SUPERTECH exhaust valve stem seals 7 mm Nissan SR20DET KA24DE

€10.84 (tax incl.)
€13.55 (tax incl.) -20%

Set of 8 exhaust valve stem seals for Nissan SR20DET and KA24DE four-cylinders, 7 mm stem.

  • Brand: SUPERTECH
  • Engines: SR20DET, KA24DE
  • Material: Viton (FKM)
VS-N7E-8
On order, 15 to 30 days lead time
Pay in installments

Nissan engines concerned

This set of 8 goes on the 7 mm stem exhaust valves of two Nissan 16-valve four-cylinders: the turbo SR20DET of the Silvia, S13 to S15 200SX, 180SX, Sunny GTI-R, Bluebird and Avenir, and the 2.4-litre KA24DE of the 240SX, Navara, Pick Up, Altima and Presage.

Each head carries 8 exhaust valves, two per cylinder. The original seal caps the guide to slow the oil while lubricating the stem; on the SR20DET Nissan lists it as 13207-84A00 (NDK) or 13207-D4201 (NOK), then 13207-53F00 (NOK) from April 1994.

SUPERTECH exhaust valve stem seals

On an SR20DET or KA24DE head the exhaust seal surrounds the hottest valve, the one releasing burnt gases into the manifold. With age its lip loses suppleness: the seal stops retaining oil, which enters the chamber and burns, giving frequent top-ups, bluish smoke and carbon on valves and manifold. A thin film of lubricant has to stay on the stem, however, so that it slides in its guide without wear.

SUPERTECH makes this set from a fluoroelastomer, Viton (FKM), which it presents as suited to high temperatures and good for 204 °C (400 °F) continuous. The sizing targets a 7 mm stem and an 11 mm outside diameter guide. Eight pieces cover every exhaust valve of the head; on the intake these engines use a 6 mm stem and take a separate polyacrylate (ACM) set.

Stem seal technical specifications

Part numberBrandPositionMaterialStem ØGuide ØSeal outside Ø
VS-N7E-8 SUPERTECH Exhaust Viton (FKM) 7 mm 11 mm 14 mm

Stem seal installation

PartOriginalReinforced
Exhaust stem seal 7 mm stem Replaced by this set
Inlet stem seal 6 mm stem VS-N6I-8
Valve guides (SR20DET) Inside Ø 7.0 mm GDE-NSR7-ET-8

Technical guide

The brand offered

SUPERTECH Located on the US west coast in San Jose, SUPERTECH has produced seals, springs, guides and valves for motorsport competition for more than 30 years, developed through finite element calculation and then proven on track by experienced engine tuners.

Why two different materials?

These four-cylinders combine two stem sizes: 6 mm on the intake with VS-N6I polyacrylate (ACM) and 7 mm on the exhaust with VS-N7E Viton (FKM), chosen for its resistance to the heat of the hotter exhaust valve. An SR20DET or KA24DE head takes 8 exhaust seals.

When valve stem seals must be replaced

  • Bluish smoke, oil topped up often
  • Valves and head taken apart
  • Fresh valve guides fitted
  • Uprated valvetrain parts fitted

Vehicle compatibility

Nissan

ModelEngine codePowerYears
180SX (S13) SR20DET 200-208 hp 1991-1997
200SX (S13) KA24DE 158 hp 1990-1993
200SX (S14, S15) SR20DET 200-220 hp 1993-2002
240SX KA24DE 150-158 hp 1988-2001
Altima (L30) KA24DE 152 hp 1997-2001
Avenir (W11) SR20DET 200 hp 1998-2005
Bassara (JU30) KA24DE 150 hp 1999-2003
Bluebird (U13, U14) KA24DE / SR20DET 152-210 hp 1991-1997
Gloria (Y34) KA24DE 152 hp 1999-2004
Largo (W30) KA24DE 116-146 hp 1993-1999
Leopard (Y33) KA24DE 152 hp 1995-2001
Lucino (N14) SR20DET 220 hp 1991-1995
Navara (D22, D40) KA24DE 143-150 hp 1997-2014
Pick Up (D22) KA24DE 126-150 hp 1997-2012
Prairie Liberty (M12) SR20DET 230 hp 1998-2001
Presage (U30) KA24DE 150 hp 1998-2002
R'nessa / Altra (N30) KA24DE / SR20DET 155-200 hp 1997-2001
Silvia (S13, S15) SR20DET 200-250 hp 1991-2003
Sunny GTI-R (N14) SR20DET 220-230 hp 1990-1995
Xterra (WD22) KA24DE 143-146 hp 1999-2004

OEM part number (Nissan SR20DET and KA24DE stem seals): SR20DET: 13207-84A00 (NDK) or 13207-D4201 (NOK); SR20DET from 04/1994: 13207-53F00 (NOK); KA24DE: 13207-53F00 (NOK) or 13207-D0111 (NDK), 13207-2B500 from 06/1997.

Important: this 7 mm stem set does not suit the SR20DE, SR20DEH, SR20DEL, SR20DNE and CA18, whose exhaust has a 6 mm stem.

Remember the inlet valve stem seals

On the intake the SR20DET takes 6 mm seals that wear alongside; renew them in this job. SUPERTECH offers them for this engine:

Nissan SR20 CA18 intake valve stem seals →

16 other products in the same category

Viewed products

Loading...