- In stock
ACL and King trimetal connecting rod bearings Nissan SR20DE SR20DET
ACL Race and King XP / XPC trimetal connecting rod bearings for the Nissan SR20DE and SR20DET.
The Nissan SR20DE and SR20DET four-cylinder engines
The SR20DE (naturally aspirated) and SR20DET (turbocharged) are the 2.0 litre inline four-cylinder engines of Nissan's SR family, with twin overhead camshafts and 16 valves. They power notably the Silvia (S13, S14, S15), 180SX, 200SX, Primera, Sunny, Bluebird, Almera, Avenir and Serena. ACL and King list the same bearing set for these engines: a single set covers the family.
From the factory, this engine is fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.
From the factory, Nissan fits these engines with connecting rod bearings under part number 12111-60J00, and its workshop manual specifies a running clearance of 0.020 to 0.045 mm.
Trimetal connecting rod bearings
A trimetal bearing combines three layers with complementary roles: a steel back that provides structural strength, a copper-lead intermediate layer that takes the heavy loads and an anti-friction running layer that protects the crankpin. The complete set contains 8 half shells, i.e. 4 pairs.
An aluminium bi-metal bearing, intended for low to medium loads, tops out at around 8,000 psi; a performance trimetal bearing holds up to 12,000 psi, 50% more load capacity. It therefore gains strength and service life on turbocharged, supercharged or high-revving engines.
Technical specifications
| ACL / King bearings Crankpin Ø 47.956 / 47.974 mm (King : 47.955 / 47.973 mm) Housing bore Ø 51.000 / 51.013 mm (King : 51.001 / 51.013 mm) Width 17.1 mm (ACL), 17 mm (King) |
| Reference | Brand and treatment | Size | Wall thickness (mm) |
|---|---|---|---|
| 4B2960H-STD | ACL Race - Untreated | Standard | 1.503 |
| 4B2960HX-STD | ACL Race - Untreated | Std, increased clearance (HX) | 1.490 |
| 4B2960H-.025 | ACL Race - Untreated | +0.025 | 1.516 |
| 4B2960H-.25 | ACL Race - Untreated | +0.25 | 1.628 |
| 4B2960H-.50 | ACL Race - Untreated | +0.50 | 1.753 |
| 4B2960HC-STD | ACL Race - Calico CT-1 | Standard | |
| 4B2960HXC-STD | ACL Race - Calico CT-1 | Std, increased clearance (HX) | |
| 4B2960HC-.025 | ACL Race - Calico CT-1 | +0.025 | |
| 4B2960HC-.25 | ACL Race - Calico CT-1 | +0.25 | |
| CR4136XP STDX | King Racing - Untreated | Std, increased clearance (STDX) | 1.491 |
| CR4136XP.026 | King Racing - Untreated | +0.026 | 1.517 |
| CR4136XP0.25 | King Racing - Untreated | +0.25 | 1.631 |
| CR4136XP0.5 | King Racing - Untreated | +0.50 | 1.758 |
| CR4136XPC | King Racing - pMaxKote | Standard | 1.504 |
| CR4136XPC STDX | King Racing - pMaxKote | Std, increased clearance (STDX) | 1.491 |
| CR4136XPC.026 | King Racing - pMaxKote | +0.026 | 1.517 |
| CR4136XPC0.25 | King Racing - pMaxKote | +0.25 | 1.631 |
Running clearance
Running clearance is the space left between the bearing and the crankpin, permanently filled by the oil film.
With the engine running, the crankpin does not touch the bearing: it rides on this oil film, which takes the load. The clearance sets the film thickness. Too small, it restricts oil flow, raises the temperature and invites seizure; too large, it lets the oil escape, the film loses its load capacity and oil pressure falls. The right clearance combines sufficient lubrication with an oil film that keeps carrying the load.
| Size / grade | When to choose it | ACL Race Series | King XP / XPC |
|---|---|---|---|
| Standard (STD) | Standard journal, not reground | 0.051 to 0.061 mm | 0.051 mm - 0.061 mm |
| Increased clearance (HX / STDX) | Wider clearance: high oil flow, high rpm | 0.077 to 0.086 mm | 0.077 mm - 0.086 mm |
| +0.025 / +0.026 mm | Polished journal | 0.051 to 0.061 mm | 0.051 mm - 0.061 mm |
| +0.25 mm | Journal reground to 0.25 mm | 0.051 to 0.061 mm | 0.051 mm - 0.061 mm |
| +0.50 mm | Journal reground to 0.50 mm | 0.051 to 0.061 mm | 0.051 mm - 0.061 mm |
Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec (see the torque table below), then compare the crushed strip against the gauge to read the clearance.

Technical guide
The ACL and King connecting rod bearings shown here are trimetal bearings built for engine tuning and racing. They withstand far higher loads than a standard bearing and come in several sizes: the standard size, a +0.025 / +0.026 mm size for a crankpin that has only been polished, +0.25 and +0.50 mm regrind sizes and the HX / STDX version with increased clearance for high-revving engines or engines needing a high oil flow. This range lets you refit a reground crankshaft without changing product line and match the clearance to the oil and use chosen.
The two brands
![]() |
ACL Bearing Company, an Australian manufacturer of high-performance engine bearings since 1949, offers with its Race Series precise trimetal bearings, available in many sizes and proven on built engines worldwide. Its Calico version (HC suffix) adds the CT-1 coating, a dry film lubricant that reduces friction and abrasive wear. |
![]() |
An Israeli maker of high-performance engine bearings since the 1960s, King Engine Bearings developed the pMax Black trimetal alloy for heavy loads, and offers the pMaxKote coating as an option (XPC version). |
Construction and advantages
| Criterion | ACL Race Series | King Racing |
| Cross-section | ![]() |
![]() |
| Type | High-performance trimetal bearing | High-performance trimetal bearing |
| Country of manufacture | Australia | Israel |
| Construction | Trimetal: steel back, copper layer, soft surface | Trimetal: steel back, copper layer, soft surface |
| Alloy | Race Series (copper-lead) | pMax Black (hardened copper-lead) |
| Protective coating | No | pMaxKote (optional, XPC version): polymer coating on the surface that limits wear when lubrication drops (start-ups, thin oil film). |
| Available sizes | Standard to +0.50 mm (+ increased clearance HX) | Standard to +0.50 mm (+ increased clearance STDX) |
Vehicle compatibility
This connecting rod bearing set fits the SR20DE and SR20DET four-cylinder engines of the following Nissan models:
| Brand | Model (chassis) | Engine code | Power | Years |
|---|---|---|---|---|
| NISSAN | SUNNY III Hatchback (N14) 2.0 GTI 16V | SR20DE | 143 hp | 1990–1995 |
| NISSAN | PRIMERA (P10) 2.0 GT / 2.0 i / 2.0 / 2.0 GT 4x4 (HNP10) / 2.0 4x4 | SR20DE | 125–150 hp | 1990–1996 |
| NISSAN | 100NX (B13) 2.0 GTI / 2.0 | SR20DE | 143–150 hp | 1990–1994 |
| NISSAN | SERENA (C23) 2.0 / 2.0 (KBC23) / 2.0 4WD (KBNC23) | SR20DE | 126–130 hp | 1992–2001 |
| NISSAN | 200SX Coupé (S14) 2.0 i 16V Turbo / 2.0 Turbo | SR20DET | 200–220 hp | 1993–2000 |
| NISSAN | PRIMERA Hatchback (P10) 2.0 i / 2.0 / 2.0 GT 4x4 | SR20DE | 125–152 hp | 1990–1996 |
| NISSAN | ALMERA I Hatchback (N15) 2.0 GTi | SR20DE | 143 hp | 1996–2000 |
| NISSAN | PRIMERA (P11) 2.0 16V | SR20DE | 115–150 hp | 1996–2001 |
| NISSAN | PRIMERA Hatchback (P11) 2.0 16V | SR20DE | 115–150 hp | 1996–2002 |
| NISSAN | PRIMERA Traveller (WP11) 2.0 16V | SR20DE | 115–140 hp | 1996–2001 |
| NISSAN | SUNNY III Liftback (N14) 2.0 i 16V | SR20DE | 143 hp | 1990–1995 |
| NISSAN | ALMERA TINO (V10) 2.0 | SR20DE | 136 hp | 2000–2003 |
| NISSAN | 200SX Coupé (S14) 2.0 i 16V / 2.0 | SR20DE | 141–162 hp | 1993–1999 |
| NISSAN | 200SX (S13) 2.0 i 16V | SR20DE | 140 hp | 1988–1993 |
| NISSAN | PRIMERA Traveller (W10) 2.0 | SR20DE | 150 hp | 1994–1998 |
| NISSAN | SERENA (C24) 2.0 SGX (PC24) / 2.0 SGX 4x4 (PNC24) | SR20DE | 145 hp | 1999–2005 |
| NISSAN | AD Van (Y10) 2.0 | SR20DE | 125 hp | 1994–1999 |
| NISSAN | ALMERA II Hatchback (N16) 2.0 | SR20DE | 145 hp | 2002–9999 |
| NISSAN | ALMERA II (N16) 2.0 | SR20DE | 145 hp | 2002–9999 |
| NISSAN | SENTRA V (B15) 2.0 | SR20DE | 145–150 hp | 2000–2006 |
| NISSAN | AVENIR (W11) 2.0 / 2.0 4x4 | SR20DE | 140–145 hp | 1997–2006 |
| NISSAN | BLUEBIRD SYLPHY I (G10, N16) 2.0 | SR20DE | 145 hp | 2000–2006 |
| NISSAN | PICK UP (D22) 2.0 | SR20DE | 125 hp | 1997–2001 |
| NISSAN | 180SX Coupé (S13) 2.0 Turbo | SR20DET | 200–208 hp | 1991–1997 |
| NISSAN | CIMA (Y33) 2.0 | SR20DE | 145 hp | 1996–2001 |
| NISSAN | EXPERT I (W10) 2.0 | SR20DE | 126 hp | 1995–2000 |
| NISSAN | BLUEBIRD (U13, U14) 2.0 / 2.0 AWD | SR20DE | 145 hp | 1991–2001 |
| NISSAN | TSURU 2.0 | SR20DE | 141 hp | 1991–2007 |
| NISSAN | SUNNY III (N14, B13) 2.0 | SR20DE | 141–143 hp | 1990–1996 |
| NISSAN | SUNNY IV Saloon (N16) 2.0 | SR20DE | 125–150 hp | 1997–2002 |
| NISSAN | LUCINO Hatchback (N15) 2.0 | SR20DE | 143 hp | 1995–2000 |
| NISSAN | LUCINO Hatchback (N14) 2.0 | SR20DE | 143 hp | 1991–1994 |
| NISSAN | LUCINO Hatchback (N14) 2.0 | SR20DET | 220 hp | 1991–1995 |
| NISSAN | LUCINO Saloon (B14) 2.0 GTi | SR20DE | 143 hp | 1995–2000 |
| NISSAN | SILVIA (S15) Turbo 16V / 2000 Turbo | SR20DET | 200–250 hp | 1999–2003 |
| NISSAN | 180SX Coupé (S13) 2.0 | SR20DE | 162 hp | 1991–1994 |
| NISSAN | BLUEBIRD (U13, U14) 2000 SSS Turbo 2.0 AWD (HNU13) | SR20DET | 210 hp | 1991–1996 |
| NISSAN | SUNNY III Coupé 2.0 | SR20DE | 141 hp | 1995–1997 |
| NISSAN | ALMERA I (N15) 2.0 | SR20DE | 125 hp | 1995–2000 |
| NISSAN | PRESEA (R11) 2.0 | SR20DE | 145 hp | 1997–2000 |
| NISSAN | AVENIR (W11) 2.0 Turbo 4x4 | SR20DET | 200 hp | 1998–2005 |
| NISSAN | SENTRA III (B13) 2.0 | SR20DE | 143 hp | 1992–1994 |
| NISSAN | PRAIRIE LIBERTY (_M12) 2.0 (PM12) / 2.0 4WD (PNM12) | SR20DE | 140 hp | 1998–2001 |
| NISSAN | PRAIRIE LIBERTY (_M12) 2.0 GT4 4WD (PNM12) | SR20DET | 230 hp | 1998–2001 |
| NISSAN | SILVIA (S15) 2000 | SR20DE | 160–165 hp | 1999–2002 |
| NISSAN | ALTRA Estate (N30) 2.0 | SR20DE | 140 hp | 1997–2001 |
| NISSAN | ALTRA Estate (N30) 2.0 | SR20DET | 200 hp | 1997–2001 |
| NISSAN | PRAIRIE PRO (M11) 2.0 (PM11) / 2.0 4x4 (PNM11) | SR20DE | 145 hp | 1995–1998 |
| NISSAN | R'NESSA (N30) 2.0 Turbo 4WD (NN30) | SR20DET | 200 hp | 1997–2001 |
| NISSAN | R'NESSA (N30) 2.0 (N30) | SR20DE | 140 hp | 1997–2001 |
| NISSAN | BLUEBIRD (U14) 2.0 / 2.0 AWD | SR20DE | 145 hp | 1996–2002 |
| NISSAN | SILVIA Coupé (S13) 2.0 | SR20DET | 205–223 hp | 1991–1993 |
| NISSAN | SILVIA Coupé (S13) 2.0 | SR20DE | 140 hp | 1991–1993 |
| NISSAN | SILVIA Convertible (S15) 2.0 | SR20DE | 160–165 hp | 2000–2001 |
| NISSAN | AVENIR (W10) 2.0 (PW10) | SR20DE | 140 hp | 1990–1997 |
| NISSAN | SENTRA II (ES, N14) 200i | SR20DE | 143 hp | 1992–2002 |
| NISSAN | SABRE (ES, N14) 200i | SR20DE | 140 hp | 1994–2001 |
| NISSAN | 200SX Coupé (S15) i 16V Turbo | SR20DET | 200 hp | 2000–2002 |
Why replace the bearings
A failing connecting rod bearing does not fail alone: it scores the crankpin, sends debris through the oil circuit and calls at least for a crankshaft regrind, when it does not also take out the rod and the block. On a built engine, a bearing set costs only a fraction of a regrind, and even less of a full rebuild: it is the cheapest part of the rotating assembly and the one whose failure costs the most.
-
Brand
-
Reference4B2960H-STD



