Skip to content
  • On order
Toyota 7MGTE Soupape échappement inconel SUPERTECH 28x5.97x98.20mm Toyota 7MGTE Soupape échappement inconel SUPERTECH 28x5.97x98.20mm

Reinforced exhaust valves VW Golf 3 GTI 2.0 16V ABF

€235.90 (tax incl.)
€294.88 (tax incl.) -20%

Set of 8 reinforced exhaust valves for the VW 2.0 16V ABF.

  • Brand: SUPERTECH
  • Engine: 2.0 16V ABF (Golf 3 GTI 16V)
  • Dimensions: 27.0 mm head (standard), 28.0, 28.5 or 29.5 mm, 7 mm stem
  • Material: nitrided stainless steel, EV16 stainless steel, Inconel or sodium filled Nimonic
VWEVN-1034-8
On order, 15 to 30 days lead time
Pay in installments

VW engines covered

The ABF is the naturally aspirated 2.0 16V of the Golf III GTI 16V, built from 1992 to 1997 with 150 hp. This four-cylinder from the EA827 family has a cylinder head with four valves per cylinder.

Its 8 original exhaust valves are 051 109 611 B: 27.0 mm head, 7.0 mm stem, 98.0 mm length. The very first ABF engines, up to engine ZD205 759, used a 027 109 611 D with a 28.0 mm head and a 98.2 mm length. As soon as more power is asked of this engine, these are the valves that take the extra heat of the burnt gases.

SUPERTECH reinforced exhaust valves

The ABF, the 150 hp 2.0 16V introduced in the Golf III GTI and belonging to the EA827 family, exposes its exhaust valves to 760 to 870 °C naturally aspirated; forced induction, by turbo or supercharger alike, takes their heads past 1,000 °C. That heat leaves the head mainly through the seat, about 75 %, and through the guide, close to 20 %. The original steel, likened to an EV8, keeps 550 MPa at 600 °C but offers only 300 MPa at 800 °C: an overheated head tires, warps and closes badly.

SUPERTECH offers four materials here. The VWEVN-1034 gets black nitrided stainless, surface-hardened to limit stem wear, and the VWEVN-1035 EV16 stainless. The VWEVI-1032F, VWEVI-1034F, VWEVI-1035 and VWEVI-1037 adopt Inconel, a heat-resisting alloy rich in nickel, holding 860 MPa near 730 °C and 554 MPa near 815 °C, about 85 % more than the original steel around 800 °C. The VWEVI-1035-HS pairs Nimonic with a hollow sodium-filled stem: liquid from 97.8 °C, it carries the heat away from the valve face down into the stem.

Only the VWEVI-1032F keeps the original 27.0 mm head. The VWEVN-1034 and VWEVI-1034F rise to 28.0 mm (+1 mm), the VWEVN-1035, VWEVI-1035 and VWEVI-1035-HS to 28.5 mm (+1.5 mm), the VWEVI-1037 to 29.5 mm (+2.5 mm). The bigger the head, the clearer the exit for burnt gases; more mixture comes in and power benefits. The seats are then recut to the chosen diameter by a properly equipped specialist.

Exhaust valve technical specifications

Part numberBrandSizeHead Ø
OEM 27.0 mm
Stem Ø
OEM 7.0 mm
Length
OEM 98.0 mm
GroovesMaterial
VWEVI-1032F-8 SUPERTECH Standard 27.0 mm 7 mm 98.2 mm 1 Inconel
VWEVN-1034-8 SUPERTECH +1 mm 28.0 mm 7 mm 98.2 mm 1 Black nitrided stainless steel
VWEVI-1034F-8 SUPERTECH +1 mm 28.0 mm 7 mm 98.2 mm 1 Inconel
VWEVN-1035-8 SUPERTECH +1.5 mm 28.5 mm 7 mm 98.2 mm 1 EV16 stainless steel
VWEVI-1035-8 SUPERTECH +1.5 mm 28.5 mm 7 mm 98.2 mm 1 Inconel
VWEVI-1035-HS-8 SUPERTECH +1.5 mm 28.5 mm 7 mm 98.2 mm 1 Sodium filled Nimonic
VWEVI-1037-8 SUPERTECH +2.5 mm 29.5 mm 7 mm 98.2 mm 1 Inconel

Valve fitting

PartVW originalReinforced
Collets KPR-VW7-S (1 groove)
Valve stem seals 027 109 675 VS-VW7E-8
Valve guide GDE-VW8V-7A-16

Before reassembly, compare the groove profile of the chosen valve with that of the collets in place, and replace them if they differ.

Only the VWEVI-1032F keeps the original exhaust seats; heads from 28.0 to 29.5 mm require all 8 seats to be recut to the chosen size.

The original ABF valve stem seals carry part number 027 109 675, for a 7 mm stem.

Technical guide

Our brand

SUPERTECH SUPERTECH Performance has built up in California, over more than thirty years, a range of racing valves completed by springs, guides and titanium retainers. The alloy, stainless, titanium or Inconel, is chosen for a given engine, then rally, drift and track builders put it to the test.

How to choose

Beneath the retainer, the collets bite into the groove on the stem to retain the valve. On the ABF two criteria guide the choice: head diameter sets the work on the cylinder head, the material sets resistance to heat.

CriterionOption 1Option 2
Size Original, 27.0 mm
VWEVI-1032F: the only part at the original size, it avoids any machining of the exhaust seats, which are simply checked during the rebuild. It suits a sound cylinder head.
+1 to +2.5 mm, 28.0 to 29.5 mm
Six enlarged versions in three diameters: the larger the head, the faster the chamber empties and the more fully it fills, which feeds power. Each of the 8 seats is recut to the selected size on a head in good condition; on the very first ABF with a 28.0 mm head, the +1 mm size equals the original.
Material Stainless
Black nitrided or EV16 stainless: a hardened surface or a heat-resisting steel that both stand up well to stem wear in the guide. These versions target a naturally aspirated road ABF or one used for the odd track session, without turbo or supercharger.
Inconel or sodium Nimonic
Nickel superalloys that keep their strength at the temperatures of a boosted exhaust; the sodium version also cools its head through the hollow stem. The right choice with forced induction or sustained track use.

When reinforced valves become necessary

  • Forced induction grafted onto the ABF (Inconel advised)
  • Livelier cam profiles, firmer valve springs
  • Repeated circuit days throughout the whole year
  • Head refurbishment with tired exhaust valves
  • Enlarged seats to improve gas flow

Vehicle compatibility

ModelEngine codePowerYears
Golf III GTI 16V (1H) ABF 150 hp 1992-1997

OEM part number (exhaust valve): 051 109 611 B (027 109 611 D up to engine ZD205 759)

Important: one set of 8 covers a complete ABF. On early ABF engines with the 027 109 611 D valve (28.0 mm head), the VWEVN-1034 and VWEVI-1034F are standard size. The 1.8 16V KR and the 2.0 16V 9A, with a 28 mm standard head, have their own page.

Don't forget the inlet valves

An ABF head opened on the exhaust side invites a look at the inlet side in the same job, so a completely new valvetrain goes back in. The matching part:

Inlet valves VW 2.0 16V ABF →

16 other products in the same category

Viewed products

Loading...