- In stock
Reinforced exhaust valves MINI Cooper S R53 W10 W11
Set of 8 reinforced exhaust valves for the MINI Cooper S R53 W10 W11.
- Brand: SUPERTECH
- Engines: W10B16A, W11B16A (R50, R52, R53)
- Dimensions: 23.2 to 27 mm head, 5.92 mm stem
- Material: Inconel or black nitrided stainless steel
MINI engines covered
The first generation MINI, R50 and R53 from 2001 to 2006 and R52 convertible from 2004 to 2008, use the 1.6 16V W10B16A or, on the Cooper S, the supercharged W11B16A.
These engines have 8 exhaust valves. SUPERTECH offers the 23.2 mm standard size and three enlarged heads (24.2, 25.5 and 27 mm), all with a 5.92 mm stem, a 118.37 mm overall length, a flat head; the three enlarged ones have a single groove.
SUPERTECH reinforced exhaust valves
On the W10 and W11 of the MINI R50, R52 and R53, the head of an exhaust valve works between 760 and 870 °C when naturally aspirated, and beyond 1,000 °C on the W11 fed by its supercharger. Heat flows out for roughly 75 % via the seat and for roughly 20 % via the guide. Used as a benchmark for the factory part, EV8 steel goes down from 550 MPa at 600 °C to 300 MPa at 800 °C; beyond that come overheating, fatigue, distortion and seat leakage.
Only the MCEVN-1004T-8, in standard size, is made of stainless steel with stem-hardening black nitriding. The three enlarged sets move to Inconel, an alloy rich in nickel that holds 860 MPa at 732 °C and 554 MPa at 816 °C, an advantage of about 85 % over EV8 near 800 °C.
Enlarged by 1, 2.3 or 3.8 mm, the head gives burnt gases a quicker exit and purges the cylinder better; each of the 8 seats then needs cutting to the selected diameter.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø OEM 23.3 mm | Stem Ø OEM 6 mm | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| MCEVN-1004T-8 | SUPERTECH | Standard | 23.2 mm | 5.92 mm | 118.37 mm | Black nitrided stainless steel | |
| MCEVI-1007FS-8 | SUPERTECH | +1 mm | 24.2 mm | 5.92 mm | 118.37 mm | 1 | Inconel |
| MCEVI-1010FS-8 | SUPERTECH | +2.3 mm | 25.5 mm | 5.92 mm | 118.37 mm | 1 | Inconel |
| MCEVI-1012S-8 | SUPERTECH | +3.8 mm | 27.0 mm | 5.92 mm | 118.37 mm | 1 | Inconel |
Valve fitting
| Part | MINI original | Reinforced |
|---|---|---|
| Collets | ||
| Valve stem seals | 11340029571 | VSI-M6E-16 |
| Valve guide | GDE-MIN-R53-8*2 |
The three enlarged references have a single groove: check that the collets suit them before reassembly.
Each set needs exhaust seats machined to its diameter: 23.2 (standard size, seats cut back), 24.2, 25.5 or 27 mm.
The 5.92 mm stem and 118.37 mm length are common to the four sets.
Technical guide
Our brand
| SUPERTECH Performance, established in California, has produced racing valves for more than 30 years. For the W10 and W11 of first generation MINIs, the brand supplies one black nitrided stainless version in standard size and three flat-head Inconel versions in oversizes. |
How to choose
Four sizes, two materials: the standard size stays in stainless steel, the three oversized heads switch to Inconel with a single groove to seat the collets. The size is decided by the planned seat machining:
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Original, 23.2 mm MCEVN-1004T-8 in black nitrided stainless steel, seats simply refaced. |
+1 mm, 24.2 mm MCEVI-1007FS-8 in Inconel, first enlargement step. |
| Oversizes | +2.3 mm, 25.5 mm MCEVI-1010FS-8 in Inconel, seats to machine at 25.5 mm. |
+3.8 mm, 27 mm MCEVI-1012S-8 in Inconel, the largest head offered. |
When reinforced valves become necessary
- Supercharger spun faster by a smaller pulley, or higher boost pressure (Inconel version advised)
- Camshafts with a sharper profile than stock
- Regular circuit outings
- Engine management recalibrated
- Cylinder head to be redone with worn exhaust valves
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| MINI (R50, R53) Cooper / Cooper S / John Cooper Works / One / S Works / Works | W10B16A / W11B16A | 90-218 hp | 2001-2006 |
| MINI (R52) Cooper / Cooper S / John Cooper Works / One | W10B16A / W11B16A | 90-210 hp | 2004-2008 |
OEM part number (exhaust valve): 11347513024
Don't forget the inlet valves
Once the W10 or W11 cylinder head is on the bench, take care of the whole inlet side in one go as well: new valves and new stem seals. The useful products:
| MINI W11B16A inlet valves → |
| MINI W11B16A valve stem seals → |
-
Brand
-
ReferenceMCEVN-1004T-8
-
In stock1 Item