- On order
SUPERTECH bronze valve guides MINI Cooper S R53 W11B16A
Set of 16 valve guides for MINI Cooper S R53 and R52 W11B16A, 5.96 mm bore.
- Brand: SUPERTECH
- Engine: W11B16A
- Material: manganese bronze
- Dimensions: outside Ø 11.06 mm, length 42 mm
MINI engines concerned
This kit fits the 16-valve cylinder head of the W11B16A, the supercharged 1.6 litre of the MINI Cooper S R53 and Convertible R52, as well as the Works, S Works and John Cooper Works versions of both models.
SUPERTECH uses a single part number here for both sides of the cylinder head: 5.96 mm bore, 11.06 mm outside diameter, 42 mm length. The kit brings together two sets of 8, that is the 16 inlet and exhaust guides of the engine.
SUPERTECH manganese bronze valve guides
Pressed into the cylinder head, each guide centres the valve over its seat, draws part of the heat taken in by the stem into the aluminium and supports the stem seal. Once worn, it lets the valve tilt and seat badly, and oil runs down the stem: oil consumption, blue smoke, falling compression.
SUPERTECH machines these guides precisely from manganese bronze, a copper-based alloy. According to SUPERTECH, this bronze conducts heat much better than the sintered guides fitted as original equipment by carmakers. They are usually paired with reinforced valves. The kit's two sets of 8 equip the whole cylinder head, the same part number serving both inlet and exhaust.
Valve guide technical specifications
| Part number | Brand | Material | Bore | Outside Ø | Length |
|---|---|---|---|---|---|
| GDE-MIN-R53-8*2 | SUPERTECH | Manganese bronze | 5.96 mm | 11.06 mm | 42 mm |
Valve guide installation
| Component | Original | Reinforced |
|---|---|---|
| Valve guide | Replaced by the kit | |
| Stem seals | 11 34 0 029 571 | VSI-M6E-16 |
| Valves | Inl. 11 34 7 513 019 / Exh. 11 34 7 513 024 | Inlet / Exhaust |
Technical guide
SUPERTECH reinforced valves offered for the W11B16A:
| MINI Cooper S R53 inlet valves → |
| MINI Cooper S R53 exhaust valves → |
Our brand
| Based in San Jose, California, SUPERTECH has been developing valves, springs, retainers and guides for motorsport for more than thirty years. Its components go through numerical simulation, ultrasonic, radiographic and laser checks, then validation with competition engine builders. |
Manganese bronze
An alloy of copper and zinc enriched with manganese, aluminium and iron, manganese bronze combines high mechanical strength with good resistance to wear and corrosion; it is chosen for bushes and guides that carry heavy loads.
When valve guides must be replaced
- Oil running down the valve stems
- Reinforced valves fitted to a tired cylinder head
- Cylinder head prepared for track, slalom or rally
- Complete valve train rebuild
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| MINI (R50, R53) Cooper S | W11B16A | 163-170 hp | 2002-2006 |
| MINI (R50, R53) Works, S Works | W11B16A | 203-210 hp | 2003-2006 |
| MINI (R50, R53) John Cooper Works | W11B16A | 218 hp | 2006 |
| MINI Cabrio (R52) Cooper S | W11B16A | 163-170 hp | 2004-2008 |
| MINI Cabrio (R52) John Cooper Works | W11B16A | 210 hp | 2004-2007 |
Remember the valve stem seals
Changing the guides also calls for new seals on the valve stems. For the W11B16A we offer the set of 16 SUPERTECH seals:
| MINI Cooper S R53 valve stem seals, set of 16 → |
-
Brand
-
ReferenceGDE-MIN-R53-8*2