Skip to content
  • In stock
Reinforced inlet valves MINI Cooper R50 R53 W10 W11 Reinforced inlet valves MINI Cooper R50 R53 W10 W11

Reinforced inlet valves MINI Cooper R50 R53 W10 W11

€214.93 (tax incl.)
€268.67 (tax incl.) -20%

Set of 8 reinforced inlet valves for MINI Cooper R50, R52 and R53.

  • Brand: SUPERTECH
  • Engines: W10B16A and W11B16A 1.6 16V
  • Dimensions: 30.2 mm, 30.7 mm or 32 mm head, 5.94 mm stem
  • Material: black nitride stainless steel, 1 or 3 grooves
MCIVN-1004T-8
3 in stock in France
On order, 15 to 30 days lead time
Available in stock in France
Pay in installments

MINI engines covered

The first-generation MINIs (R50, R52 convertible and R53) use a 1.6-litre 16-valve four-cylinder engine whose valves are worked by roller rocker arms with hydraulic adjustment. Naturally aspirated it is coded W10B16A (Cooper, One); supercharged it becomes the W11B16A of the Cooper S and John Cooper Works.

Each engine has 8 inlet valves, original part number 11 34 7 513 019, with a 5.94 mm stem. A smaller supercharger pulley, a sharper camshaft or a higher rev limit load them far more than the factory setting.

SUPERTECH reinforced inlet valves

On the 1.6 litre of the MINI R50, R52 and R53, each inlet valve is worked by a roller rocker: it steps aside to let the mixture through, then snaps back down on its seat, its stem never pausing inside the guide. On a Cooper S with a fast-spinning supercharger, this cycle tops twenty repeats a second whenever the four-cylinder is held near the limiter. The part spends its time between 400 and 550 °C, a range in which a usual chrome-silicon steel drops from 500 MPa at 500 °C to 250 MPa at 600 °C, thus giving up 50 % of its strength at the slightest temperature rise.

SUPERTECH makes its four part numbers in stainless steel and applies black nitriding to them. The resulting layer hardens the stem: it resists guide friction better and wears more slowly, even with a reduced supercharger pulley or stiffer springs. All of them also get two machining features specific to the brand: a head thinned under the seat face and a profiled back, which clear the air path around the valve and help it reach the cylinder with fewer losses.

The MCIVN-1004T-8 keeps the 30.2 mm diameter of SUPERTECH's standard size; the MCIVN-1005S-8 moves to 30.7 mm (+0.5 mm), while the MCIVN-1008S-8 and MCIVN-1008T-8 go up to 32 mm (+1.8 mm). A wider head opens a larger flow area facing the seat: the cylinders draw a bigger charge and the MINI gains power, once a workshop has opened all 8 inlet seats to suit.

Inlet valve technical specification

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
MCIVN-1004T-8 SUPERTECH Standard 30.2 mm 5.94 mm 109.58 mm Black nitride stainless steel
MCIVN-1005S-8 SUPERTECH +0.5 mm 30.7 mm 5.94 mm 109.58 mm 1 Black nitride stainless steel
MCIVN-1008S-8 SUPERTECH +1.8 mm 32.0 mm 5.94 mm 109.58 mm 1 Black nitride stainless steel
MCIVN-1008T-8 SUPERTECH +1.8 mm 32.0 mm 5.94 mm 109.58 mm 3 Black nitride stainless steel

+0.5 mm and +1.8 mm sizes are given relative to the 30.2 mm head of MCIVN-1004T-8.

Fitting details

PartMINI originalReinforced
Collets 11 34 7 513 015
Valve stem seals 11 34 0 029 571 VSI-M6E-16
Valve guide GDE-MIN-R53-8*2

Single-groove versions (MCIVN-1005S-8, MCIVN-1008S-8) are fitted with single-groove collets that clamp the stem; 3-groove versions take 3-groove collets, preferably new.

The 30.7 and 32 mm heads require all 8 inlet seats to be machined to the diameter of the chosen valve.

Technical guide

The brand offered

SUPERTECH SUPERTECH Performance was born in California and has spent over thirty years on racing valve trains. The brand forges its valves then machines them on CNC, before ultrasonic, radiographic and laser control; springs, retainers and guides complete its catalogue.

How to choose

The groove is the notch close to the stem end, into which the retainer's collets fit. On this engine, two criteria guide the decision: size, then groove.

CriterionOption 1Option 2
Size Standard size
30.2 mm head, when the inlet seat faces remain at their factory diameter: MCIVN-1004T-8, the only one of the four that fits without recutting the seats, ideal for a careful rebuild without seeking extra filling.
Oversizes
30.7 or 32 mm head: about 10 to 12 cfm more air for each millimetre gained. Seat faces then have to be brought to that size; these sizes also give a second life to a cylinder head reground during an earlier rebuild.
Grooves Single groove
With this design, the collet wraps the stem widely and relieves its single groove, which improves strength under firm springs and high revs; it is SUPERTECH's choice for a tuned MINI. Specific single-groove collets are then mandatory, preferably new.
3 grooves
The most common fitting layout, suited to road use or light tuning. Three-groove collets are best fitted new; once revs climb very high, it is still the lowest groove that carries the most load along the stem.

When reinforced valves become necessary

  • Smaller supercharger pulley or higher boost
  • Reground livelier cam or springs rated higher
  • Rev cut-off pushed back
  • Head rebuilt for track, hill climbs or rally
  • Marked stock valves or reground seat faces

Compatible vehicles

ModelEngine codePowerYears
MINI (R50) Cooper, One W10B16A 2001-2006
MINI (R53) Cooper S, John Cooper Works W11B16A 2001-2006
MINI (R52) Cooper, One W10B16A 2004-2008
MINI (R52) Cooper S, John Cooper Works W11B16A 2004-2008

OEM part number (inlet valve): 11 34 7 513 019

Important: a set of 8 covers a complete engine. The R56 and later MINIs with the Prince engine (N12, N14, N16, N18) use different valves.

Related products

Use the removed cylinder head to replace the 8 exhaust valves of this 1.6 litre as well: their reinforced version sits behind the link below:

MINI Cooper S R53 W10 W11 exhaust valves →

16 other products in the same category

Viewed products

Loading...