Skip to content
  • On order
VAG 1.8 20V Ep: 1.37mm Joint de culasse renforcé COMETIC VAG 1.8 20V Ep: 1.37mm Joint de culasse renforcé COMETIC

Reinforced head gasket VW Audi 1.8 2.0 2H GX HT JH JN PF PG RD RV PL 9A

€113.59 (tax incl.)
€151.45 (tax incl.) -25%

Reinforced Athena and Cometic head gasket in MLS. One gasket per engine.

  • Brands: Athena, Cometic
  • Engines: 1.8 and 2.0 VW Audi, 2H, GX, HT, JH, JN and 6 other codes
  • Bores: 83 to 85 mm
  • Thicknesses: 0.69 to 3.56 mm
  • Replaces: 026 103 383 K ; 037 103 383
C4247-045
On order, 15 to 30 days lead time
Pay in installments

The Volkswagen and Audi engines covered

The inline four-cylinder petrol engines of 1.8 litres (2H, GX, HT, JH, JN, PF, PG, RD, RV and PL) and 2.0 litres (9A) from the Volkswagen group make up this family: the PL and the 9A have 16 valves and the PG exists as the G60. They power the Volkswagen Golf I and II, Jetta I and II, Passat B2, B3 and B4, Scirocco, Corrado, Caddy I, Santana and Fox, as well as the Audi 80 B2 and B3 and the Audi Coupé B2 in the table below. One cylinder head covers all four cylinders: the gasket is sold singly, one per engine.

The manufacturer lists the standard gasket as 026 103 383 K, and 037 103 383 for the PG; it publishes neither the bore, nor the thickness, nor the construction of these gaskets. They are sized for the original combustion pressure: beyond it the clamp load relaxes, the head lifts and coolant passes into a cylinder.

Reinforced cylinder head gaskets

The gasket is not everything: the fasteners that clamp the head to the block matter as much as it does. Above 100 N/mm² of stress, a composite gasket settles for good; the 301 stainless steel of MLS gaskets withstands 517 N/mm², 5 times more, and recovers its shape at every combustion.

This page gathers the part numbers of two competition manufacturers, Athena and Cometic, in multi-layer MLS construction, with four gasket bores: 83, 83.8, 84 and 85 mm. Thicknesses run from 0.69 to 3.56 mm, enough to set the compression ratio without touching pistons or head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
Brand Part number
OEM 026 103 383 K
83 mm 0.69 mm 3.73 MLS Cometic C4247-027
83 mm 0.76 mm 4.11 MLS Cometic C4247-030
83 mm 0.91 mm 4.92 MLS Cometic C4247-036
83 mm 1.02 mm 5.52 MLS Cometic C4247-040
83 mm 1.14 mm 6.17 MLS Cometic C4247-045
83 mm 1.30 mm 7.03 MLS Cometic C4247-051
83 mm 1.40 mm 7.57 MLS Athena 338003R
83 mm 1.42 mm 7.68 MLS Cometic C4247-056
83 mm 1.52 mm 8.22 MLS Cometic C4247-060
83 mm 1.68 mm 9.09 MLS Cometic C4247-066
83 mm 1.78 mm 9.63 MLS Cometic C4247-070
83 mm 1.91 mm 10.33 MLS Cometic C4247-075
83 mm 2.03 mm 10.98 MLS Cometic C4247-080
83 mm 2.13 mm 11.52 MLS Cometic C4247-084
83 mm 2.18 mm 11.80 MLS Cometic C4247-086
83 mm 2.34 mm 12.66 MLS Cometic C4247-092
83 mm 2.49 mm 13.47 MLS Cometic C4247-098
83 mm 3.05 mm 16.50 MLS Cometic C4247-120
83 mm 3.56 mm 19.26 MLS Cometic C4247-140
83.8 mm 1.40 mm 7.72 MLS Athena 338004R
84 mm 1.78 mm 9.86 MLS Cometic H0950SPA070S
85 mm 0.69 mm 3.92 MLS Cometic C4246-027
85 mm 0.76 mm 4.31 MLS Cometic C4246-030
85 mm 0.91 mm 5.16 MLS Cometic C4246-036
85 mm 1.02 mm 5.79 MLS Cometic C4246-040
85 mm 1.14 mm 6.47 MLS Cometic C4246-045
85 mm 1.30 mm 7.38 MLS Cometic C4246-051
85 mm 1.42 mm 8.06 MLS Cometic C4246-056
85 mm 1.52 mm 8.63 MLS Cometic C4246-060
85 mm 1.68 mm 9.53 MLS Cometic C4246-066
85 mm 1.78 mm 10.10 MLS Cometic C4246-070
85 mm 1.91 mm 10.84 MLS Cometic C4246-075
85 mm 2.03 mm 11.52 MLS Cometic C4246-080
85 mm 2.13 mm 12.09 MLS Cometic C4246-084
85 mm 2.18 mm 12.37 MLS Cometic C4246-086
85 mm 2.34 mm 13.28 MLS Cometic C4246-092
85 mm 2.49 mm 14.13 MLS Cometic C4246-098
85 mm 3.05 mm 17.31 MLS Cometic C4246-120
85 mm 3.56 mm 20.20 MLS Cometic C4246-140

The volume of a gasket is the free space it leaves above each piston. It adds to that of the combustion chamber and lowers the compression ratio. The comparison only makes sense between gaskets of the same bore, here 83, 84 or 85 mm.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts 2H, GX, HT, JH, JN, PF, RD, RV, PL, 9A not published by the manufacturer

Before fitting, run a straight edge over the head and the block to check their flatness, and have any warped surface ground. Apply no sealing compound: Athena and Cometic supply their gaskets already coated and excess compound would upset the clamping load.

Technical guide

The two constructions offered

Athena MLS cylinder head gasket Athena MLS
Two to five layers of AISI 301 stainless steel, laser cut, stamped and riveted. Around each cylinder, a layer folded over on itself, the Gas Stopper, concentrates the clamping load on the combustion chamber, while beads seal the water and oil passages. The outer layers receive a two-coat finish: the first withstands high temperatures and fills small irregularities on the block and cylinder head, the second, silicone based, keeps the gasket from sticking on disassembly. This is Athena's all-steel choice, from a prepared naturally aspirated engine to moderate forced induction.
Cometic MLS cylinder head gasket Cometic MLS
Embossed stainless steel sheets, stacked and riveted to one another. The outer sheets carry active raised beads around each cylinder and each fluid passage. A moderate clamping load is enough to seal and the bore distorts little: a versatile construction, from the tuned naturally aspirated engine to reasonable boost.

Choosing bore and thickness

Gasket bore. The Athena MLS comes in 83 mm (338003R, for the 8-valve 2H, GX, HT, JH, JN, PF, RD and RV) and in 83.8 mm (338004R, for the 16-valve PL), the Cometic MLS in 83 mm (C4247), in 84 mm (H0950SPA070S) and in 85 mm (C4246).

Thickness. The manufacturer gives no thickness for its standard gaskets: only the measurement of the removed gasket counts. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Standard thickness not communicated: measure the removed gasket, then take the closest figure between 0.69 and 3.56 mm
Skimmed cylinder head, make up the lost height Between 0.69 and 3.56 mm, start from the thickness of the removed gasket and add the material taken off when resurfacing
Forced induction build, lower the ratio 3.56 mm, if the removed gasket is thinner
Naturally aspirated build, raise the ratio 0.69 mm, if the removed gasket is thicker

As the standard thickness is not published, use a dial gauge to read how far the pistons stand above the block deck: this figure gives the clearance left between piston and head, above all if you choose a thickness below that of the removed gasket.

The two brands

Athena Athena S.p.A. is an Italian manufacturer of engine gaskets and components, with its head office and main plant in Alonte, in the Veneto region. The group also produces in Spain, the United States, Brazil and India. Its multi-layer gaskets are fitted as original equipment by car manufacturers, and its racing range is designed and made entirely in Italy.
Cometic Cometic Gasket, Inc., an American maker of gaskets and sealing solutions for engines, was founded in 1989 in Concord, Ohio. Its reputation rests on the made-to-order gasket, cut to the bore and thickness required and built entirely in the United States from American raw materials.

Advantages over the original gasket

Criterion Original gaskets 026 103 383 K; 037 103 383 Reinforced gaskets
Construction Not specified by the manufacturer Multi-layer stainless steel
Gasket bore not published by the manufacturer 83, 83.8, 84 and 85 mm
Thicknesses available not published by the manufacturer 0.69 to 3.56 mm, 19 values
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the bore of the gaskets offered (83, 83.8, 84 and 85 mm) covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Brand Model Engine code Power Years
Audi 80 B2 Berline tricorps 1.8 JN - 01/1983 - 08/1986
Audi 80 B2 Berline tricorps 1.8 CC quattro JN - 08/1984 - 08/1986
Audi 80 B3 Berline tricorps 1.8 S JN - 09/1986 - 10/1991
Audi 80 B3 Berline tricorps 1.8 S quattro JN - 09/1986 - 09/1991
Audi COUPE B2 1.8 GT JN - 09/1982 - 10/1988
Volkswagen CADDY I (14) 1.8 JH - 08/1985 - 07/1992
Volkswagen CORRADO (53I) 1.8 G60 PG - 09/1988 - 09/1993
Volkswagen CORRADO (53I) 2.0 i 16V 9A - 08/1991 - 12/1995
Volkswagen FOX Berline tricorps 1.8 JN - 01/1987 - 12/1990
Volkswagen FOX Variant 1.8 JN - 09/1986 - 12/1990
Volkswagen GOLF I 1.8 GTI JH - 01/1983 - 12/1984
Volkswagen GOLF I Cabriolet (155) 1.8 JH - 08/1983 - 04/1993
Volkswagen GOLF I Cabriolet (155) 1.8 2H - 08/1989 - 03/1993
Volkswagen GOLF II (19E, 1G1) 1.8 GX - 08/1984 - 10/1991
Volkswagen GOLF II (19E, 1G1) 1.8 GTI HT, RV - 01/1985 - 07/1985
Volkswagen GOLF II (19E, 1G1) 1.8 GTI RD - 08/1985 - 10/1987
Volkswagen GOLF II (19E, 1G1) 1.8 GTI 16V PL - 02/1986 - 10/1991
Volkswagen GOLF II (19E, 1G1) 1.8 Syncro GX - 02/1986 - 07/1991
Volkswagen GOLF II (19E, 1G1) 1.8 GTI Cat PF - 01/1987 - 10/1991
Volkswagen GOLF II (19E, 1G1) 1.8 i Cat GX - 08/1987 - 10/1991
Volkswagen GOLF II (19E, 1G1) 1.8 i Cat Syncro GX - 08/1987 - 10/1991
Volkswagen GOLF II (19E, 1G1) 1.8 GTI G60 Syncro PG - 08/1988 - 12/1991
Volkswagen GOLF II (19E, 1G1) 2.0 GTI 9A - 09/1989 - 12/1992
Volkswagen GOLF II (19E, 1G1) 1.8 GTI G60 PG - 04/1990 - 07/1991
Volkswagen JETTA I 1.8 JH - 01/1983 - 07/1986
Volkswagen JETTA II (19E, 1G2, 165) 1.8 GX - 08/1984 - 10/1991
Volkswagen JETTA II (19E, 1G2, 165) 1.8 HT, RV - 01/1985 - 12/1992
Volkswagen JETTA II (19E, 1G2, 165) 1.8 RD - 08/1985 - 10/1987
Volkswagen JETTA II (19E, 1G2, 165) 1.8 16V PL - 08/1986 - 10/1991
Volkswagen JETTA II (19E, 1G2, 165) 1.8 Cat PF - 01/1987 - 10/1991
Volkswagen JETTA II (19E, 1G2, 165) 1.8 Cat GX - 08/1987 - 10/1991
Volkswagen JETTA II (19E, 1G2, 165) 1.8 Syncro GX - 08/1987 - 12/1988
Volkswagen JETTA II (19E, 1G2, 165) 2.0 9A - 08/1989 - 07/1992
Volkswagen PASSAT B2 (32B) 1.8 JN - 01/1983 - 03/1988
Volkswagen PASSAT B2 Variant (33B) 1.8 JN - 01/1983 - 03/1988
Volkswagen PASSAT B2 Variant (33B) 1.8 Syncro JN - 01/1986 - 03/1988
Volkswagen PASSAT B3/B4 1.8 G60 PG - 08/1991 - 10/1993
Volkswagen PASSAT B3/B4 (3A2, 35I) 1.8 PF - 04/1988 - 07/1993
Volkswagen PASSAT B3/B4 (3A2, 35I) 1.8 G60 Syncro PG - 08/1988 - 08/1996
Volkswagen PASSAT B3/B4 (3A2, 35I) 2.0 16V 9A - 08/1988 - 09/1993
Volkswagen PASSAT B3/B4 Variant (3A5, 35I) 1.8 PF - 04/1988 - 07/1990
Volkswagen PASSAT B3/B4 Variant (3A5, 35I) 1.8 G60 Syncro PG - 08/1988 - 05/1997
Volkswagen PASSAT B3/B4 Variant (3A5, 35I) 2.0 16V 9A - 08/1988 - 09/1993
Volkswagen SANTANA 1.8 JN - 09/1983 - 12/1985
Volkswagen SANTANA 1.8 GL JN - 05/1991 - 07/1994
Volkswagen SCIROCCO 1.8 16V PL - 09/1985 - 07/1992
Volkswagen SCIROCCO (53B) 1.8 JH - 11/1985 - 07/1992

OEM part number: 026 103 383 K ; 037 103 383.

Important: the gaskets on this page are listed for the 1.8 litre and 2.0 litre engines of the survey below, at Volkswagen and Audi. For any other vehicle, check the engine code before ordering.

Why switch to a reinforced gasket?

When the standard gasket is no longer enough, the reinforced gasket takes over: under higher combustion pressure, the stainless steel of the MLS sheets does not crush and the gasket keeps its shape.

An engine fitted with a turbo, a supercharger or a higher compression ratio puts the head gasket to the test first, as the weakest link of the top end. A reinforced gasket spares you the leak and the head removal that follows, a job far more expensive than the part: better to fit it at the build stage.

16 other products in the same category

Viewed products

Loading...