- On order
Reinforced inlet valves BMW M3 E30 S14B23 S14B25
Set of 8 reinforced inlet valves for BMW M3 E30 S14B23 and S14B25.
- Brands: SUPERTECH, CATCAMS
- Engines: S14B23, S14B25
- Dimensions: 37.0 mm, 38.0 mm, 38.5 mm or 39.0 mm head, 7 mm stem
- Material: black nitride stainless steel, 3 grooves (SUPERTECH)
BMW engines covered
The S14 is the inline four-cylinder of the BMW M3 E30: 16 valves, twin overhead camshafts and valve clearance set by shims. It comes in two displacements: the 2.3 litre S14B23 (93.4 mm bore, 84 mm stroke), fitted to the M3 from 1986 to 1991, and the 2.5 litre S14B25 (95 x 87 mm), reserved for the 1990 M3 Sport Evolution.
Its 8 inlet valves have a 7 mm stem. On the S14B23, BMW part 11 34 1 309 343 measures 37.0 mm at the head, 7.0 mm at the stem and 121.4 mm in length; the M3 Sport Evolution uses 11 34 1 315 507, with a head enlarged to 38.5 mm. Both are held by 3-groove collets 11 34 1 307 136. Designed for the standard engine, they work much harder as soon as a tune adds lift, firmer springs or revs.
SUPERTECH and CATCAMS reinforced inlet valves
An inlet valve lets fresh air into the cylinder and then shuts that opening again, at a pace of several dozen cycles per second at high revs. Each time, its head lands hard on the seat while its stem keeps rubbing against the guide. It works between 400 and 550 °C, and the chrome-silicon steel fitted at the factory is already weakening there: 500 MPa at 500 °C, 250 MPa at 600 °C, just above that range, which means 50 % of its strength gone. Raising lift, spring stiffness, revs or boost pressure adds impacts, friction and heat.
The SUPERTECH valves sold here are made from a competition-grade chrome-nickel stainless steel related to EV8 (21-4N). At 500 °C this alloy still withstands 650 MPa, 30 % above the factory steel; at 600 °C it keeps 550, which is 120 % better. A black nitriding treatment hardens and smooths their surface, so they rub and wear less inside the guide. CATCAMS rounds out the range with valves supplied in sets of 8, at the BMW size or at +1 mm.
The SUPERTECH range includes three oversizes: +1 mm (38.0 mm head), +1.5 mm (38.5 mm) and +2 mm (39.0 mm), against 37.0 mm as standard. Only the head diameter changes and the stem stays at 7 mm: the opening at the seat widens, more air reaches the chamber and power goes up. These sizes are 121.4 mm long, like the BMW part, or 123.8 mm in a lengthened version; the standard-size reference measures 123.0 mm. The inlet seats then need cutting to the new diameter.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø OEM 37.0 mm | Stem Ø OEM 7 mm | Length OEM 121.4 mm | Grooves | Material |
|---|---|---|---|---|---|---|---|
| BMIVN-1006L-8 | SUPERTECH | Standard | 37.0 mm | 7 mm | 123.0 mm | 3 | Black nitride stainless steel |
| BMIVN-1008-8 | SUPERTECH | +1 mm | 38.0 mm | 7 mm | 121.4 mm | 3 | Black nitride stainless steel |
| BMIVN-1009-8 | SUPERTECH | +1.5 mm | 38.5 mm | 7 mm | 121.4 mm | 3 | Black nitride stainless steel |
| BMIVN-1009L-8 | SUPERTECH | +1.5 mm | 38.5 mm | 7 mm | 123.8 mm | 3 | Black nitride stainless steel |
| BMIVN-1010-8 | SUPERTECH | +2 mm | 39.0 mm | 7 mm | 121.4 mm | 3 | Black nitride stainless steel |
| BMIVN-1010L-8 | SUPERTECH | +2 mm | 39.0 mm | 7 mm | 123.8 mm | 3 | Black nitride stainless steel |
| 9213003M*8 | CATCAMS | Standard | 37.0 mm | 7 mm | 121.8 mm | ||
| 9213009M*8 | CATCAMS | +1 mm | 38.0 mm | 7 mm | 121.8 mm |
M3 Sport Evolution (S14B25): original inlet valve with a 38.5 mm head (11 34 1 315 507).
Fitting details
| Part | BMW original | Reinforced |
|---|---|---|
| Collets | 11 34 1 307 136 (3 grooves) | |
| Valve stem seals | Kit 11 34 9 059 171 | VS-VW7I-8 (inlet) |
| Valve guide | Inner Ø 7.0 mm H7 | GDE-BMS14-7 |
SUPERTECH valves have 3 grooves, like the BMW ones: they take 7 mm 3-groove collets, preferably new. CATCAMS valves are fitted with KK7 collets.
The +1, +1.5 and +2 mm sizes fit inlet seats cut to the new dimension, a job to plan with the cylinder head rebuild.
S14 valve clearance is set with shims: once the valves are replaced, check the clearance and adjust the shims.
Technical guide
Our brands
| SUPERTECH, from its base in San Jose, California, has spent more than 30 years developing valves, springs, retainers and guides for racing engines. Each design is drawn for a specific cylinder head, checked in production, then proven by engine builders, from circuit racing to drag racing. | |
| CATCAMS is a Belgian valvetrain specialist: it designs its own cam profiles and grinds them on CNC machines. It also supplies tappets, shims, springs and retainers, and its camshafts have made their mark in the BTCC as well as at the Le Mans 24 Hours. |
How to choose
Collets sit in the groove to lock the valve below its retainer. All SUPERTECH valves here have 3 grooves, as on the BMW part: you choose size and brand.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard size 37.0 mm head, the diameter BMW specified. This is the right option as long as the inlet seats keep their ex-factory dimension, with no rework, on a road engine or a rebuild that stays true to the production spec. |
+1 to +2 mm oversizes 38.0, 38.5 and 39.0 mm heads: a larger opening around the seat lets the engine draw in more air and make more power, roughly 10 to 12 cfm for each mm of head diameter. The seats are cut to the chosen diameter, ideally together with reworked ports; these sizes also help to recover seats that were already recut. |
| Brand | SUPERTECH Stainless steel, black nitrided, with 3 grooves as designed by BMW, so the stem can turn freely in its collets. Four sizes to choose from, at 121.4 mm long or in lengthened versions of 123.0 and 123.8 mm. 7 mm 3-groove collets, new ones preferred. |
CATCAMS Valves at standard size or +1 mm, 121.8 mm long, sold in sets of 8. They are fitted with the KK7 collets the maker specifies for this engine. |
When reinforced valves become necessary
- Higher-lift camshafts or firmer valve springs
- Rev limit pushed higher
- Turbo or supercharger conversion
- Cylinder head rebuilt for racing, drifting or rallying
- Factory valves marked, worn or recut to repair size
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| M3 (E30) 2.3 | S14B23 | 195-200 hp | 1986-1991 |
| M3 Evo (E30) 2.3 | S14B23 | 220 hp | 1988-1990 |
| M3 Sport Evolution (E30) 2.5 | S14B25 | 238 hp | 1990 |
OEM part number (inlet valve): 11 34 1 309 343 (S14B23) ; 11 34 1 315 507 (S14B25)
Related products
An S14 head rebuild also calls for new exhaust valves and new inlet stem seals. The parts that match this engine are listed just below:
| BMW M3 E30 S14B23 S14B25 exhaust valves → |
| 7 mm inlet valve stem seals → |
-
Brand
-
ReferenceBMIVN-1008-8