Skip to content
  • On order
Reinforced exhaust valves Toyota Celica MR2 3S-GTE Reinforced exhaust valves Toyota Celica MR2 3S-GTE

Reinforced exhaust valves Toyota Celica MR2 3S-GTE

€187.78 (tax incl.)
€234.72 (tax incl.) -20%

Set of 8 reinforced exhaust valves for the Toyota 3S-GTE.

  • Brands: FERREA, SUPERTECH
  • Engine: 3S-GTE
  • Dimensions: 29 mm head (standard), 29.5 or 30 mm, 5.97 mm stem
  • Material: Super Alloy, Inconel, special alloy or black nitrided stainless steel
F6065*8
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Toyota engines covered

The 3S-GTE is Toyota's 2 litre 16-valve turbocharged four, used in the ST165, ST185 and ST205 Celica GT-Four, the SW20 MR2 Turbo and the four-wheel-drive Caldina.

Its 8 exhaust valves have a 29 mm standard head, a 5.97 mm stem and a 99.7 mm overall length; they work in the gases that feed the turbo, hotter still when boost is raised.

SUPERTECH and FERREA reinforced exhaust valves

Sitting at the chamber outlet, the 3S-GTE exhaust valve bathes in the gases that then go on to drive the turbine. The metal of its head reaches 760 to 870 °C on an unboosted engine, but passes 1,000 °C as soon as a turbo pushes, which is the factory case on this block. The seat carries away close to 75 % of the heat, the guide close to 20 %. Steel quickly loses strength as it heats: taken as a benchmark, an EV8-family steel holds 550 MPa at 600 °C, yet only 300 MPa at 800 °C. Raised boost or a bigger turbo drives the head beyond that, so it tires, warps and loses its seal.

That is why reinforced valves switch material. FERREA offers its Super Alloy here, a nickel-based alloy, and its 6000 series made of EV8 stainless with hard chromed stems. SUPERTECH supplies a black nitrided stainless steel, whose hardened layer spares the stem in its guide, and Inconel, a high-temperature nickel alloy retaining 860 MPa at 730 °C and 554 MPa at 815 °C, roughly 85 % more than EV8 near 800 °C: the material to retain for high boost.

Away from the 29 mm standard size, the head moves to 29.5 mm (+0.5 mm, TEVN-1011) or to 30 mm (+1 mm, FERREA F1866P and F6066, SUPERTECH TEVN-1016 and TEVI-1016). The rest of the valve stays the same; the cylinder sheds its burnt gases sooner, fills better, and power rises. All 8 seats are machined to suit the new diameter.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
F1865P*8 FERREA Standard 29.0 mm 5.97 mm 99.7 mm Super Alloy (nickel base)
F6065*8 FERREA Standard 29.0 mm 5.97 mm 99.7 mm EV8 stainless steel, hard chrome stem
TEVN-1011-8 SUPERTECH +0.5 mm 29.5 mm 5.97 mm 99.5 mm Black nitrided stainless steel
F1866P*8 FERREA +1 mm 30.0 mm 5.97 mm 99.7 mm Super Alloy (nickel base)
TEVN-1016-8 SUPERTECH +1 mm 30.0 mm 5.97 mm 99.1 mm Black nitrided stainless steel
F6066*8 FERREA +1 mm 30.0 mm 5.97 mm 99.7 mm EV8 stainless steel, hard chrome stem
TEVI-1016-8 SUPERTECH +1 mm 30.0 mm 5.97 mm 99.1 mm Inconel

The F1865P and F6065 are standard size, the F1866P, F6066, TEVN-1016 and TEVI-1016 +1 mm; the TEVN-1011 is +0.5 mm, in black nitrided stainless steel.

Valve fitting

PartToyota originalReinforced
Collets 90913-03021 KPR-6T-ST
Valve stem seals 90913-02062 / 02085 / 02122 / 02090 / 02104 / 02066 VS-TS6E-8
Valve guide GDE-T3SGT-EI-8

Before refitting the springs, check that the collets suit the groove of the chosen valve.

At 29 mm the seats stay as they are; with a 29.5 or 30 mm head, the 8 exhaust seats are machined to the new size.

All part numbers keep the 5.97 mm stem; length goes from 99.7 mm (FERREA) to 99.5 mm (TEVN-1011) and 99.1 mm (TEVN-1016, TEVI-1016).

Technical guide

Our brands

SUPERTECH SUPERTECH has designed racing valvetrain parts in San Jose, California, for more than 30 years. Stainless, Inconel or titanium valves, springs, retainers: the range is drawn engine by engine, then proven in racing by renowned tuners, from circuit racing to drag racing.
FERREA FERREA, set up in 1978 by Horacio Ferrea, produces its valves between Florida and Argentina. Stainless steel, nickel superalloys, titanium: its ranges equip tuned road engines as well as racing engines, and its series stand apart through the material chosen for each use.

How to choose

Each valve takes collets cut for its own groove design: check this on the parts received. Then two criteria guide your purchase: head diameter, which tells whether the seats need machining, and material.

CriterionOption 1Option 2
Size Standard, 29 mm
The right pick when the exhaust seats are in good condition: the head goes back together with no machining at all. FERREA F1865P in Super Alloy and F6065 in EV8 stainless steel, each supplied as a set of 8 valves.
+0.5 or +1 mm, 29.5 or 30 mm
Being larger, the head clears the cylinder faster and power climbs (count around 10 to 12 cfm per mm of head); machining to size also brings tired seats back into shape. SUPERTECH TEVN-1011, TEVN-1016, TEVI-1016; FERREA F1866P, F6066.
Material Super Alloy or Inconel
FERREA F1865P and F1866P, SUPERTECH TEVI-1016: two nickel-based alloys that keep their strength where steel gives way. These are the versions to favour under high turbo pressure or with a larger turbo.
EV8 stainless or black nitrided stainless
FERREA 6000 series, with hard chromed stems; SUPERTECH TEVN-1011 and TEVN-1016, whose nitrided surface resists wear in the guide. For a 3S-GTE kept at stock boost or barely raised.

When reinforced valves become necessary

  • Boost pressure raised beyond the factory value
  • Turbo replaced by a bigger unit (Inconel or Super Alloy version recommended)
  • Camshafts with a sharper profile
  • Rally, hill climb or track days
  • Head overhaul, exhaust valves marked or worn

Vehicle compatibility

ModelEngine codePowerYears
Caldina (T21) 2.0 4WD (ST215W) 3S-GTE 1997-2002
Caldina (T24) 2.0 4WD (ST246W) 3S-GTE 2002-2007
Celica (T16) 2.0 Turbo 4WD (ST165) 3S-GTE 1987-1989
Celica (T18) 2.0 4WD (ST185) 3S-GTE 1989-1994
Celica (T20) GT-Four 2.0 4WD (ST205) 3S-GTE 1994-1999
MR2 II (SW20) 2.0 Turbo 3S-GTE 1989-1999

OEM part number (exhaust valve): 13715-88360 (10/1987 à 08/1989) ; 13715-88361 (01/1990 à 06/1995)

Important: one set of 8 covers a complete engine. The naturally aspirated 3S-GE has its own valves and is not covered on this page.

Don't forget the inlet valves

With the 3S-GTE head removed, it makes sense to renew its inlet valves too, along with a complete set of fresh stem seals. Here they are for your engine:

Inlet valves 3S-GTE →
Toyota 3S-GTE valve spring kit →

15 other products in the same category

Viewed products

Loading...