- On order
Reinforced exhaust valves Mazda MX-5 1.6 B6
Set of 8 reinforced exhaust valves for the Mazda MX-5 1.6 B6.
- Brand: SUPERTECH
- Engines: B6ZE, B64F, B6GP, 8AN1, B6MC, B6MU (MX-5 NA and NB 1.6)
- Dimensions: 26.2 mm or 27.2 mm head, 5.94 mm stem
- Material: black nitrided stainless steel
Mazda engines covered
The B6 is Mazda's 1.6 litre, twin overhead camshaft, 16-valve four-cylinder that powers the first generation MX-5 (NA) and then the 1.6 version of the second (NB), from 1989 to 2005.
It carries 8 exhaust valves, two per cylinder, with a 5.94 mm stem; they release the burnt gases on every cycle and take the highest heat in the valvetrain.
SUPERTECH reinforced exhaust valves
On the MX-5's B6, a naturally aspirated engine, the exhaust head metal settles between 760 and 870 °C; graft on a turbo or a supercharger and it crosses 1,000 °C. About 75 % of this heat is evacuated via the seat, with nearly 20 % via the guide. Yet EV8 steel, used as a basis for comparison, falls from 550 MPa at 600 °C to 300 MPa at 800 °C; too hot, the head tires, warps and then lets gases leak.
On this block SUPERTECH uses a stainless steel built to withstand high temperatures, coated with a black nitriding: the stem becomes harder and rubs less in its guide.
MAEVN-1100-8 and MAEVN-1102-8 share stem and length; the head of the second measures 27.2 mm instead of 26.2 mm. Wider, it lets burnt gases out faster, the chamber purges better and the B6 gains power, provided the exhaust seats are recut to this dimension.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| MAEVN-1100-8 | SUPERTECH | Standard | 26.2 mm | 5.94 mm | 105.35 mm | Black nitrided stainless steel | |
| MAEVN-1102-8 | SUPERTECH | +1 mm | 27.2 mm | 5.94 mm | 105.35 mm | Black nitrided stainless steel |
The MAEVN-1100-8 keeps the original head size; the MAEVN-1102-8 is the version with a head enlarged by 1 mm.
Valve fitting
| Part | Mazda original | Reinforced |
|---|---|---|
| Collets | ||
| Valve stem seals | ||
| Valve guide |
Check that the original collets sit properly in the groove of the new valves before releasing the springs.
The 5.94 mm stem runs in the cylinder head guides: measure their clearance before reassembly and replace worn guides.
The exhaust seats are recut during the rebuild; with the MAEVN-1102-8 they are machined to the 27.2 mm head diameter.
Technical guide
Our brand
| SUPERTECH Performance, a Californian house, has been making cylinder head components for competition for more than 30 years, from springs to titanium retainers. For the B6 it supplies a black nitrided stainless valve studied for this block, in the original size or with a head 1 mm larger. |
How to choose
Only the head separates the two versions; the stem, its groove that takes the collets under the upper retainer, and the length stay identical. The choice therefore depends on the machining planned for the seats:
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | MAEVN-1100-8 26.2 mm head, the B6 original size: for a rebuild that keeps the seat diameter. |
MAEVN-1102-8 27.2 mm head, 1 mm larger: better emptying of the chamber, exhaust seats to be machined to this size. |
When reinforced valves become necessary
- Camshafts with more lift than standard
- Adding a turbocharger or a positive displacement supercharger
- Circuit, hill climb or slalom driving
- Cylinder head reworked for a naturally aspirated build
- Tired original exhaust valves found during a head rebuild
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| MX-5 I (NA) 1.6 | B6ZE | 106 hp | 1989-1993 |
| MX-5 I (NA) 1.6 (NA6C) | B6ZE / B64F | 115 hp | 1990-1994 |
| MX-5 I (NA) 1.6 Turbo | B6GP | 150 hp | 1990-1992 |
| MX-5 I (NA) 1.6 (NA6C) | 8AN1 | 90 hp | 1995-1998 |
| MX-5 II (NB) 1.6 (NB6C) | B6ZE | 125 hp | 1998-2005 |
| MX-5 II (NB) 1.6 (NB6C) | B6ZE | 120 hp | 1998-2005 |
| MX-5 II (NB) 1.6 16V (NB6C) | B6MC / B6MU | 110 hp | 1998-2005 |
OEM part number (exhaust valve):
Don't forget the inlet valves
B6 cylinder head off the engine? It is worth fitting fresh inlet side valves at this point, each with a new stem seal. The corresponding product is listed below:
| Inlet valves Mazda MX-5 B6 1.6 → |
-
Brand
-
ReferenceMAEVN-1100-8