Skip to content
  • On order
Reinforced exhaust valves BMW B58B30 S58B30 Reinforced exhaust valves BMW B58B30 S58B30

Reinforced exhaust valves BMW B58B30 S58B30

€542.82 (tax incl.)
€678.53 (tax incl.) -20%

Set of 12 reinforced exhaust valves for BMW B58B30 and S58B30.

  • Brands: SUPERTECH, FERREA
  • Engines: B58B30, S58B30
  • Dimensions: 28.5 mm, 29.0 mm or 29.5 mm head, 6 mm stem
  • Material: Inconel, sodium filled Inconel or Super Alloy, single or 3 grooves
F2430P*12
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

BMW engines covered

Launched in 2015, the B58B30 is BMW's modular inline six: 2,998 cc (82 mm bore, 94.6 mm stroke), one turbocharger and direct injection. It is found in the M140i, M240i, 340i, M340i, 440i, 540i and the Z4 M40i. The S58B30, the twin turbo M version of 2,993 cc (84 x 90 mm) introduced in 2019, powers the M2 G87, M3 G80 and G81, M4 G82 and G83, X3 M and X4 M.

The B58 uses 12 exhaust valves 11 34 8 621 264: 28.5 mm head, 6 mm stem, 99.8 mm length, held by collets 11 34 1 461 405, with valve stem seal kit 11 34 0 035 853. On these turbocharged engines, every increase in boost pressure translates directly into a hotter exhaust valve head.

SUPERTECH and FERREA reinforced exhaust valves

On the B58 as on the S58, the exhaust valve opens into the stream of burnt gases that feeds the turbine or turbines. Its head metal climbs above 1,000 °C there, whereas a naturally aspirated engine keeps it at 760 to 870 °C. To cool down it relies only on its seat, which drains around 75 % of the heat, and on its guide, which removes 20 %. Taken as a basis of comparison, EV8 grade steel withstands 550 MPa at 600 °C and only 300 MPa at 800 °C: every rise in boost pressure pushes the head temperature up, so it tires, distorts and stops closing properly.

All the SUPERTECH valves in this kit are in Inconel, a nickel superalloy still at 860 MPa around 730 °C and 554 MPa around 815 °C, nearly 85 % more strength than EV8 near 800 °C. The MCEVI-1400S-HS and TEVI-1058-HS-1 add a hollow sodium filled stem, liquid from 97.8 °C, which carries heat out of the head and into the stem. The FERREA F2430P, F2451P and F2472P belong to the Competition Plus series in Super Alloy, offering 20 % greater heat resistance and a valve seat life extended by 25 %.

Two references enlarge the head: the FERREA F2451P to 29.0 mm (+0.5 mm) and the SUPERTECH TEVI-1058-HS-1 to 29.5 mm (+1 mm). Burnt gases clear faster towards the turbo, the cylinder takes in more fresh air and power benefits. Both versions fit on exhaust valve seats machined to their new size.

Exhaust valve technical specifications

Part numberBrandSizeHead Ø
OEM 28.5 mm
Stem Ø
OEM 6 mm
Length
OEM 99.8 mm
GroovesMaterial
MCEVI-1400S-HS-12 SUPERTECH Standard 28.5 mm 6 mm 100.1 mm 1 Sodium filled Inconel
TEVI-1058-12 SUPERTECH Standard 28.5 mm 6 mm 100.1 mm 1 Inconel
TEVI-1058T-12 SUPERTECH Standard 28.5 mm 6 mm 100.1 mm 3 Inconel
TEVI-1058-HS-1-12 SUPERTECH +1 mm 29.5 mm 6 mm 100.1 mm 1 Sodium filled Inconel
F2430P*12 FERREA Standard 28.5 mm 6 mm 99.8 mm 3 Super Alloy (nickel base)
F2451P*12 FERREA +0.5 mm 29.0 mm 6 mm 99.8 mm 3 Super Alloy (nickel base)
F2472P*12 FERREA Standard 28.5 mm 6 mm 99.8 mm 1 Super Alloy (nickel base)

The stem of the F2451P and F2472P is reduced by 1 mm towards the tip to keep the original BMW rocker arm; the F2472P, for the S58 only, requires FERREA K10123 collets.

Valve fitting

PartBMW originalReinforced
Collets 11 34 1 461 405 (3 grooves) KPR-6S-7 (single groove, SUPERTECH) / K10123 (FERREA)
Valve stem seals Kit 11 34 0 035 853 VSI-BM60-E-12 (exhaust)
Valve guide GDE-BMB48-E6 (B58) / VG1125 (S58)

The single groove SUPERTECH valves are fitted with the KPR-6S-7 collets. The TEVI-1058T, F2430P and F2451P have 3 grooves and keep 3 groove collets. The single groove F2472P requires FERREA K10123 collets.

With a 28.5 mm head, the exhaust seats keep their size and are checked during the cylinder head rebuild. The 29.0 and 29.5 mm versions require the seats to be cut to their size.

The F2430P and F2451P fit the S58 and the Toyota Supra B58, the F2472P the S58 only; the MCEVI-1400S-HS fits the B48 and B58, and the TEVI-1058 range the B58B30.

Technical guide

Our brands

SUPERTECH SUPERTECH is a Californian house from Silicon Valley that has produced titanium retainers, guides, springs and competition valves for more than 30 years. Stainless steel, titanium or Inconel alike, every SUPERTECH valve is born for a given engine and refined alongside renowned track, rally and drag racing tuners.
FERREA FERREA Racing Components dates from 1978, when Horacio Ferrea teamed up with Daniel Urrutia. Valves leave its Florida and Argentina workshops cut from a nickel superalloy, titanium or stainless steel, and engine builders on every continent fit them, from NASCAR to drag strips.

How to choose

Under the upper retainer, the collets sit in the stem groove or grooves and hold the valve. This kit offers one or three grooves and three head diameters: the size is chosen first, then the groove type.

CriterionOption 1Option 2
Size Standard, 28.5 mm
For a cylinder head with factory exhaust valve seats: no machining, just a check at rebuild. SUPERTECH in solid or sodium filled Inconel, FERREA in Super Alloy.
Enlarged, 29.0 or 29.5 mm
FERREA F2451P (+0.5 mm) or SUPERTECH TEVI-1058-HS-1 (+1 mm, sodium filled Inconel): the wider head lets burnt gases out sooner towards the turbo and improves filling, to the benefit of power. Seats to be machined to the chosen size.
Grooves 3 grooves
BMW layout kept: the stem stays free to turn in its collets, best bought new. Enough for an engine close to stock. Weak point: a shock on closing is passed to the bottom groove, the thinnest. SUPERTECH TEVI-1058T, FERREA F2430P and F2451P.
Single groove
The collets grip the stem and relieve the groove, the wider contact reduces friction: the valve copes better with stiff springs, big lift and high revs. SUPERTECH with KPR-6S-7, FERREA F2472P with K10123, for the S58 only.

When reinforced valves become necessary

  • Remap and raised boost pressure (Inconel versions advised)
  • Bigger turbo or hybrid turbos on the S58
  • More aggressive camshafts or stiffer springs
  • Track days, drifting or racing
  • Original valves burnt or out of tolerance at head rebuild

Vehicle compatibility

ModelEngine codePowerYears
M140i (F20 / F21) B58B30 340 hp 2015-
M240i (F22 / F87) B58B30 340 hp 2015-2021
M240i (G42) B58B30B 374 hp 2021-
340i (F30) B58B30 326-360 hp 2015-2018
M340i (G20) B58B30 374-387 hp 2019-
440i (F32 / F82) B58B30 326-360 hp 2016-
540i (G30) B58B30 340-360 hp 2016-2020
Z4 M40i (G29) B58B30C 340 hp 2018-
M2 / M2 CS (G87) S58B30 460-530 hp 2022-
M3 / M3 Competition / M3 CS (G80) S58B30 480-551 hp 2020-
M3 Competition / M3 CS (G81) S58B30 510-551 hp 2022-
M4 / M4 Competition / M4 CS / M4 CSL (G82) S58B30 480-551 hp 2020-
M4 Competition (G83) S58B30 510-530 hp 2021-
X3 M / X3 M Competition (F97) S58B30 480-510 hp 2019-
X4 M / X4 M Competition (F98) S58B30 480-510 hp 2019-

OEM part number (exhaust valve): B58B30: 11 34 8 621 264; S58B30: 11 34 8 603 910

Important: the FERREA valves are intended for the S58 (F2430P, F2451P, F2472P) and the Toyota Supra B58 (F2430P, F2451P), not for BMW cars with the B58. The enlarged sizes require seat cutting.

Don't forget the inlet valves

For a B58 or S58 cylinder head rebuilt from scratch, also plan new inlet valves and exhaust valve stem seals. Here are the parts suited to these engines:

Inlet valves BMW B58B30 →
Exhaust valve stem seals BMW B58 →

15 other products in the same category

Viewed products

Loading...