- On order
Trimetal connecting rod bearings 45 mm Peugeot Citroën XU7 EW7 EW10
Set of 8 trimetal connecting rod half-bearings for Peugeot and Citroën XU7JP, EW7J4, EW10 (Ø 45 mm).
- Brand and treatment: ACL Race, King Racing
- Compatibility: Peugeot 206, 307, 308, 406, 407; Citroën C4, Xsara
- Engine codes: XU7JP, EW7J4, EW10
- Available sizes: standard to +0.30 mm, increased-clearance version (HX / STDX)
The Peugeot and Citroën XU7, EW7 and EW10 four-cylinder engines
The XU7JP and EW7J4 (1.8 litre) and the EW10 (2.0 litre: EW10J4, EW10J4S, EW10A) are in-line four-cylinder engines from Peugeot and Citroën, fitted to the Peugeot 206, 307, 308, 406 and 407 and to the Citroën C4 and Xsara. ACL and King list the same bearing set for these engines: a single set covers the family.
From the factory, these engines are fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.
Trimetal connecting rod bearings
In a trimetal bearing, a steel back carries a copper-lead intermediate layer with high load capacity, itself covered by an anti-friction running layer that spares the crankpin. The set is supplied complete: 8 half shells, i.e. 4 pairs.
Trimetal targets high, sustained loads, whereas aluminium bi-metal is limited to low to medium loads: about 8,000 psi for the latter, up to 12,000 psi for a performance trimetal, 50% more. The benefit shows in strength and durability on turbo, supercharged and high-revving engines.
Technical specifications
| ACL / King bearings Crankpin Ø 44.975 / 44.991 mm Housing bore Ø 48.655 / 48.671 mm Width 22.5 / 22.6 mm |
| Reference | Brand and treatment | Size | Wall thickness (mm) |
|---|---|---|---|
| 4B7736H-STD | ACL Race - Untreated | Standard | 1.821 |
| 4B7736HX-STD | ACL Race - Untreated | Std, increased clearance (HX) | 1.808 |
| 4B7736H-.30 | ACL Race - Untreated | +0.30 | 1.971 |
| CR4603XP | King Racing - Untreated | Standard | 1.819 |
| CR4603XP STDX | King Racing - Untreated | Std, increased clearance (STDX) | 1.806 |
| CR4603XP0.3 | King Racing - Untreated | +0.30 | – |
Running clearance
Running clearance is the gap between the bearing and the crankpin, filled by the oil film.
While the engine turns, the crankpin floats on this oil film, which carries the load without direct contact with the bearing. Film thickness depends on clearance: too tight, oil passes poorly, temperature rises and the risk of seizure grows; too wide, oil escapes, the film carries less and oil pressure decreases. A correct clearance ensures both sufficient lubrication and a well-maintained film.
| Size / grade | When to choose it | ACL Race Series | King XP |
|---|---|---|---|
| Standard (STD) | Standard journal, not reground | 0.049 to 0.058 mm | 0.045 mm |
| Increased clearance (HX / STDX) | Wider clearance: high oil flow, high rpm | 0.074 to 0.083 mm | 0.070 mm |
| +0.30 mm | Journal reground to 0.30 mm | 0.049 to 0.058 mm | 0.045 mm |
Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Technical guide
These ACL and King trimetal connecting rod bearings are aimed at built engines and racing: where a standard bearing quickly reaches its limit, they accept more power, more rpm and more boost. The range includes the standard size, a +0.30 mm regrind size and the HX / STDX version with increased clearance for high-revving engines or engines needing a high oil flow. It allows the same part number to be kept after the crankshaft is reground and the clearance to be tailored to the oil used and the engine's duty.
The two brands
![]() |
An Australian specialist in high-performance engine bearings since 1949, ACL Bearing Company produces the Race Series: precisely made trimetal bearings, available in numerous sizes and recognised on built engines across the world. |
![]() |
Since the 1960s, Israel's King Engine Bearings has built high-performance engine bearings; its pMax Black trimetal alloy bearings are sized for heavy loads. |
Construction and advantages
| Criterion | ACL Race Series | King Racing |
| Cross-section | ![]() |
![]() |
| Type | High-performance trimetal bearing | High-performance trimetal bearing |
| Country of manufacture | Australia | Israel |
| Construction | Trimetal: steel back, copper layer, soft surface | Trimetal: steel back, copper layer, soft surface |
| Alloy | Race Series (copper-lead) | pMax Black (hardened copper-lead) |
| Protective coating | No | No |
| Available sizes | Standard to +0.30 mm (+ increased clearance HX) | Standard to +0.30 mm (+ increased clearance STDX) |
Vehicle compatibility
This connecting rod bearing set fits the EW10 engines of the following Peugeot and Citroën models:
| Brand | Model (chassis) | Engine code | Power | Years |
|---|---|---|---|---|
| PEUGEOT | 206 S16 | EW10J4 | 136 hp | 1999–2007 |
| PEUGEOT | 206 S16 | EW10J4 | 136 hp | 1999–2007 |
| PEUGEOT | 206 RC | EW10J4S | 180 hp | 2003–2007 |
| PEUGEOT | 307 2.0 16V | EW10J4 | 136 hp | 2000–2005 |
| PEUGEOT | 307 2.0 16V | EW10A | 140 hp | 2004–2009 |
| PEUGEOT | 307 2.0 16V | EW10J4S | 177 hp | 2003–2009 |
| PEUGEOT | 308 2.0 16V | EW10A | 140 hp | 2008–2014 |
| PEUGEOT | 406 2.0 16V | EW10J4 | 136 hp | 1999–2004 |
| PEUGEOT | 407 2.0 16V | EW10J4 | 136 hp | 2004–2005 |
| PEUGEOT | 407 2.0 16V | EW10A | 140 hp | 2005–2011 |
| CITROËN | C4 2.0 16V | EW10J4 | 136 hp | 2004–2007 |
| CITROËN | C4 2.0 16V | EW10A | 140 hp | 2004–2011 |
| CITROËN | C4 VTS | EW10J4S | 180 hp | 2004–2010 |
| CITROËN | Xsara VTS | EW10J4 | 136 hp | 2000–2005 |
Why replace the bearings
Replacing the bearings during a build or rebuild guards against the most expensive failure: a worn-out connecting rod bearing scores the crankpin, contaminates the oil circuit with debris and forces at least a crankshaft regrind, or even a new rod and block. Against such costs a new set weighs little: it is the cheapest part of the rotating assembly, but the one whose failure costs the most.
-
Brand
-
Reference4B7736H-STD



