- In stock
Reinforced inlet valves PEUGEOT CITROËN 206 RC 307 C4 VTS EW10J4S
Set of 8 reinforced inlet valves for PEUGEOT 206 RC 307 and CITROËN C4 2.0 16V VTS EW10J4S.
- Brands: CATCAMS, SUPERTECH
- Engine: EW10J4S 2.0 16V (206 RC 2003 to 2007, 307 2003 to 2009)
- Dimensions: head 35 mm, stem 6 mm or 5.97 mm, length 106 mm or 106.1 mm
- Material: black nitride stainless steel (SUPERTECH)
PEUGEOT and CITROËN engines covered
The EW10J4S is the most highly tuned version of PSA's EW10 four-cylinder: 2.0 litres (1,997 cc), 16 valves, 85 mm bore and 88 mm stroke. At Peugeot it powers the 206 RC from 2003 to 2007 and the 307 2.0 16V and 307 CC from 2003 to 2009, with 177 to 180 hp. At Citroën it is fitted to the C4 2.0 16V, coupé (LA_) and hatchback (LC_), from 2004 to 2010, with 177 hp.
Eight inlet valves work in it, two per cylinder, on a 6 mm stem. A more aggressive camshaft, higher revs or a race-prepared cylinder head subject them to far more impact and heat than normal use.
SUPERTECH and CATCAMS reinforced inlet valves
On the EW10J4S, the inlet valve meters the air entering each of the four cylinders: pushed by the cam, it lifts off its seat, then snaps back onto it while gliding along its guide. When the 2 litre of the 206 RC or C4 climbs towards its red line, this cycle recurs well beyond twenty times a second, and each of the 8 valves lives between 400 and 550 °C. A chrome-silicon steel as found in stock parts holds 500 MPa at 500 °C there but no more than 250 MPa at 600 °C: 50 % of its strength flies away as soon as heat rises a notch.
The SUPERTECH PEIVN-28704-8 pairs a competition stainless steel with black nitriding. This very hard surface layer clearly slows stem wear over the strokes and keeps friction low, even over long sessions at high revs. Just below the head the stem narrows, which removes moving weight and frees the flow, while the head gets a back cut that eases the air gently to the seat. The CATCAMS 9249003M is aimed rather at heads already running a valve train of that brand.
Both sets keep a 35 mm head and go in without enlarging the inlet seats. The SUPERTECH, at its maker's standard size, combines a 5.97 mm stem and a 106.1 mm length; the CATCAMS 9249003M uses a 6 mm stem for 106 mm overall. No oversize-head valve is offered here for this engine.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| 9249003M*8 | CATCAMS | 35 mm | 6 mm | 106 mm | |||
| PEIVN-28704-8 | SUPERTECH | Standard | 35 mm | 5.97 mm | 106.1 mm | Black nitride stainless steel |
Fitting details
| Part | original | Reinforced |
|---|---|---|
| Collets | ||
| Valve stem seals | ||
| Valve guide |
On reassembly, make sure the collets match the groove of the chosen valves.
Technical guide
The brands offered
| SUPERTECH Performance has its Californian base in San Jose and has developed competition valve train parts there for three decades and more, from valve to guide. Each series undergoes ultrasonic, X-ray and laser checks before it goes on to power dragsters and circuit cars. | |
| CATCAMS, a European house built on the racing camshaft, completes its profiles with matching valves, springs and retainers. Its kits target engines prepared for rally, hill climb and circuit, where high revs are the rule. |
How to choose
The groove, cut near the stem end, is where the collets sit to lock the retainer. Same head for both sets; stem, length and finish change:
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Brand and finish | CATCAMS 35 mm head, 6 mm stem and 106 mm length, suited to a head already fitted with a valve train of that brand. |
SUPERTECH 35 mm head, 5.97 mm stem, 106.1 mm length, stainless steel finished in black nitride, with a stem necked down beneath the head for freer flow. |
When reinforced valves become necessary
- Reground sharper cams or stiffened springs
- Red line shifted above factory
- Turbo or supercharger added to the EW10J4S
- Head rebuilt for stages, hill climbs or track
- Stock valves marked or seats reground in the past
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| CITROËN C4 Coupé (LA_) 2.0 16V | EW10J4S | 177 hp | 2004-2010 |
| CITROËN C4 I (LC_) 2.0 16V | EW10J4S | 177 hp | 2004-2008 |
| PEUGEOT 206 (2A/C) 2.0 RC | EW10J4S | 177-180 hp | 2003-2007 |
| PEUGEOT 307 (3A/C) 2.0 16V | EW10J4S | 177 hp | 2005-2007 |
| PEUGEOT 307 CC (3B) 2.0 16V | EW10J4S | 177-180 hp | 2003-2009 |
Related products
206 RC, 307 or C4 head off? Seize the chance to change its 8 exhaust valves too, available reinforced on the page behind the next button:
| PEUGEOT 206 RC 307 EW10J4S exhaust valves → |
-
Brand
-
ReferencePEIVN-28704-8
-
In stock5 Items