Skip to content
  • On order
Reinforced exhaust valves Peugeot 206 RC 307 Citroën C4 EW10J4S Reinforced exhaust valves Peugeot 206 RC 307 Citroën C4 EW10J4S

Reinforced exhaust valves Peugeot 206 RC 307 Citroën C4 EW10J4S

€258.05 (tax incl.)
€322.56 (tax incl.) -20%

Set of 8 reinforced exhaust valves for the Peugeot 206 RC, 307 and Citroën C4 2.0 16V EW10J4S.

  • Brands: CATCAMS, SUPERTECH
  • Engine: EW10J4S 2.0 16V (206 RC, 307, 307 CC, C4)
  • Dimensions: 31 mm head, 6 mm or 5.95 mm stem
  • Material: Inconel (SUPERTECH)
9249004M*8
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Peugeot and Citroën engines covered

The EW10J4S, Peugeot's 2.0 16V, powers the 206 RC (2A/C) from 2003 to 2007, the 307 2.0 16V (3A/C) from 2005 to 2007 and the 307 CC (3B) from 2003 to 2009.

At Citroën, the EW10J4S 2.0 16V powers the C4 (LA_) 2.0 16V from 2004 to 2010 and the C4 I (LC_) 2.0 16V from 2004 to 2008.

It has 8 exhaust valves. The CATCAMS 9249004M and SUPERTECH PEEVN-28705 valves both have a 31 mm head in standard size; the stem measures 6 mm on the CATCAMS and 5.95 mm on the SUPERTECH, the overall length 103 and 102.85 mm.

SUPERTECH reinforced exhaust valves

On the EW10J4S, the exhaust valve sees freshly burnt gases rush past on every cycle, so it remains the most thermally stressed part of the cylinder head. Read in the metal, the head runs between 760 and 870 °C on this unboosted 2.0, beyond 1,000 °C if a turbo or supercharger is added. The seat removes about 75 %, the guide nearly 20 %. Taken as the reference for the original, the EV8 steel family goes from 550 MPa at 600 °C down to 300 MPa at 800 °C. Once torque, revs or boost rise, temperature climbs, the metal fatigues, the head warps and the seal at the seat is lost.

Reinforced valves therefore change material. The SUPERTECH PEEVN-28705-8 is made of Inconel, a nickel superalloy that keeps 860 MPa at 730 °C and still 554 MPa near 815 °C, about 85 % better than EV8 steel around 800 °C: the version to choose for a boosted or hard-worked EW10J4S. The CATCAMS 9249004M, supplied as a set of 8, follows the dimensions of the factory part, with a 31 mm head and a 6 mm stem, for anyone wishing to stay as close as possible to standard. Two philosophies thus sit side by side: the heat resistance of Inconel on one hand, faithful factory dimensions on the other.

On this engine, both sets keep the original 31 mm, with no enlarged head version. The exhaust seats are therefore simply reground during the rebuild, with no recutting to another size, and the engine retains the flow of its standard cylinder head.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
9249004M*8 CATCAMS Standard 31.0 mm 6 mm 103 mm
PEEVN-28705-8 SUPERTECH Standard 31.0 mm 5.95 mm 102.85 mm Inconel

Valve fitting

PartPeugeot / Citroën originalReinforced
Collets
Valve stem seals
Valve guide

Before reassembly, check that the collets suit the lock groove of the selected valves.

Both sets are standard size: exhaust seats simply cut back at 31 mm.

The stem is not the same from one brand to the other (6 mm CATCAMS, 5.95 mm SUPERTECH): check guide clearance.

Technical guide

Our brands

SUPERTECH SUPERTECH set up more than three decades ago south of San Francisco, in Silicon Valley, to develop racing valves and springs as well as guides and titanium retainers. Each model is born for one specific engine and is then fine-tuned with recognised tuners from several disciplines.
CATCAMS CATCAMS, a Belgian valvetrain house, defines its own camshaft profiles and grinds them on CNC machines. Its range of parts extends to tappets, valve springs, shims and retainers, and its camshafts have competed in the British Touring Car Championship and in the Le Mans 24 Hours.

How to choose

Seated under the retainer, the collets immobilise the valve in its place. Since the two sets have an identical 31 mm head, the choice depends on brand, material and stem diameter, to be checked against the guides.

CriterionOption 1Option 2
Brand SUPERTECH
PEEVN-28705-8 in Inconel, at the original 31 mm size. This nickel superalloy stays strong beyond 800 °C, where steel weakens: the only version in this material for the EW10J4S, to favour with forced induction or heavy track use.
CATCAMS
9249004M, as a set of 8 for a complete engine, keeping the 31 mm head of the original part. The Belgian specialist intends it for a rebuild that respects the factory dimensions of the EW10J4S, on seats that are simply reground.
Stem and length SUPERTECH, 5.95 mm
5.95 mm stem for a length of 102.85 mm. Being 0.05 mm thinner than the CATCAMS, the stem calls for checking the play in the guides already fitted before assembly, and replacing them when that play is excessive.
CATCAMS, 6 mm
6 mm stem for a length of 103 mm, so 0.15 mm longer than the SUPERTECH version. Guide clearance must still be checked, as must the collets, which have to match the groove perfectly before any reassembly.

When reinforced valves become necessary

  • Turbo or supercharger added to the EW10J4S (Inconel version recommended)
  • Higher lift camshafts, firmer valve springs
  • Rev limiter set higher up the range
  • Regular circuit, rally or autotest use
  • Head to rebuild, exhaust valves worn, pitted or marked

Vehicle compatibility

ModelEngine codePowerYears
Peugeot 206 (2A/C) 2.0 RC EW10J4S 177-180 hp 2003-2007
Peugeot 307 (3A/C) 2.0 16V EW10J4S 177 hp 2005-2007
Peugeot 307 CC (3B) 2.0 16V EW10J4S 177-180 hp 2003-2009
Citroën C4 (LA_) 2.0 16V EW10J4S 177 hp 2004-2010
Citroën C4 I (LC_) 2.0 16V EW10J4S 177 hp 2004-2008

OEM part number (exhaust valve):

Important: one set of 8 equips a complete engine.

Don't forget the inlet valves

Once the 206 RC, C4 VTS or 307 cylinder head is off, replace the inlet side and its valve stem seals in the same go. On the inlet side, the EW10J4S has its own page:

See the EW10J4S inlet valves

16 other products in the same category

Viewed products

Loading...